hash
stringlengths 32
32
| doc_id
stringlengths 5
12
| section
stringlengths 4
1.47k
| content
stringlengths 0
6.67M
|
|---|---|---|---|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.8.5.1 MO_LR Basic Self Location Request in Idle Mode (Normal Case)
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.8.5.1.1 Conformance requirements:
|
The following requirements apply for this test:
1. The MS sends CM SERVICE REQUEST to network for call independent supplementary service.
2. The MS invokes self-location request by sending a REGISTER message containing a LCS-MOLR invoke component with MO_LR TYPE set to ASSISTANCE DATA, LOCATION_METHOD TYPE set ASSISTEDGPS, and GPS_ASSISTANCE_DATA TYPE set to the type of ASSISTANCE_DATA requested.
3. The MS sends RRLP ASSISTANCE DATA ACK. for each RRLP ASSISTANCE DATA component.
4. The MS shall terminate the dialogue by sending a RELEASE COMPLETE message.
Test References
3GPP TS 03.71, sub clause 7.6.6,
3GPP TS 04.30 sub clause 5.1.1,
3GPP TS 04.80 / 3GPP TS 24.080 sub clause 2.4, 2.5, 3.4 and 4
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.8.5.1.2 Test Purpose
|
To verify that a MS invokes a self-location request by sending the network a REGISTER message containing FACILITY IE LCS-MOLR REQ. On receipt of each of RRLP ASSISTANCE DATA from SS with the requested assistance data, MS shall send RRLP ASSISTANCE ACK for each component to SS. When the MS receives a FACILITY message containing a FACILITY IE LCS-MOLR return result for the acknowledgement of completing assistance data delivery, it clears the transaction by sending a RELEASE COMPLETE message.
Specific PICS statements
- TSPC_MS_RRLP_RELEASE
PIXIT statements
-
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.8.5.1.3 Method of Test
|
Initial Conditions
System Simulator:
Serving cell: default parameters.
Satellite signals: default conditions.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
Test Procedure:
A MOLR procedure as call independent supplementary services is initiated from the MS. The MS performs control early classmark sending to provide LCS positioning method capability. After sending the CIPHERING MODE COMPLETE message the MS sends a REGISTER message with Facility IE containing a component set to a DTAP LCS-MOLR Invoke for Assistance Data. The SS sends a number of RRLP Assistance Data components and MS sends RRLP Assistance Data Ack for each component. SS sends DTAP LCS-MOLR Return Result for acknowledgement of completion of assistance data delivery. The MS performs the measurement and calculates the position fix using the assistance data delivered. The MS terminates the dialogue by sending RELEASE COMPLETE message.
Maximum duration of the test:
5 minutes.
Expected Sequence
Step
Direction
Message
Comments
1
MS
Initiate LCS MOLR Procedure (assistance data request)
2
MS -> SS
CHANNEL REQUEST
Establishment cause indicates "Other procedures which can be completed with an SDCCH"
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS -> SS
CM SERVICE REQUEST
Establishment cause indicates "Supplementary service activation".
"mobile station classmark 2" includes settings for ES_IND.
5
MS -> SS
CLASSMARK CHANGE
"mobile station classmark 2" including settings for ES IND and CM3 supported.
"mobile station classmark 3" includes settings for Positioning according to 3GPP TS 24.008, table 10.5.1.7. Position method Capability is set to 1 and Bit 2 is set to 1 ( MS-Based GPS)
6
SS -> MS
AUTHENTICATION REQUEST
7
MS -> SS
AUTHENTICATION RESP
SRES specifies correct value.
8
SS -> MS
CIPHERING MODE COMMAND
SS starts deciphering after sending the message.
9
MS -> SS
CIPHERING MODE COMPLETE
Shall be sent enciphered. All following messages shall be sent enciphered.
10
MS -> SS
REGISTER
Call Independent SS containing Facility IE
With the component of Invoke message set to LCS-MOLR with MOLR-Type set to assistanceData.
11n
SS -> MS
RR APPLICATION INFORMATION
RRLP ASSISTANCE DATA
The number of instances of this message depends on the amount of assistance data requested in step 10
12n
MS -> SS
RR APPLICATION INFORMATION
RRLP ASSISTANCE DATA ACK
Each instance of RRLP ASSISTANCE DATA message in step 11 is acknowledged
13
SS -> MS
FACILITY
LCS MO-LR RETURN RESULT
14
MS -> SS
RELEASE COMPLETE
Terminates the session
15
SS -> MS
CHANNEL RELEASE
The main signalling link is released.
Specific Message Contents
CLASSMARK CHANGE
Information element
Value/remark
as default except:
Mobile station Classmark 2
-ES_IND
"Controlled Early Classmark Sending" option is implemented in the MS.
CM3
The MS Supports options that are indicated in classmark 3 IE
Mobile station Classmark 3
See below
MS Positioning Method Capability
This bit indicates that the MS supports Positioning Method for the provision of Location Services.
Positioning Method(s) support, 5 bit field
Support of certain positioning method (3GPP TS 24.008, table 10.5.1.7), Bit 2 set to 1.
REGISTER (Step 10):
Information element
Value/remark
Protocol Discriminator
Call Independent SS message (1011)
Transaction Identifier
Message Type
REGISTER (xx11 1011)
Facility
Invoke = LCS-MOLR
LCS-MOLRArg
MOLR-Type->assistanceData
Location Method->assistedGPS
GPSAssistanceData-> any value is acceptable
RR_APPLICATION_INFORMATION
Information element
Value/remark
Protocol Discriminator
RR Management Protocol (0110)
Skip Indicator
Message Type
Application Information Message type
APDU ID
APDU ID -> RRLP => 0000
APDU Flags
Bit1=0 -> Last or only segment
Bit2=0 -> First or only segment
Bit3=0 -> Command or Final Response
Bit4=spare
APDU Data
2-N Byte ASN.1 Coded
Steps 11n: RRLP Assistance Data
Steps 12n: RRLP Assistance Data Ack.
RRLP Assistance Data (Step 11n):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
The assistance data requested by the MS in Step 10 that is available in the SS, shall be sent in zero, one or more RRLP Assistance Data messages containing the requested assistance data from TS 51.010-7 sub clauses 5.1.3 to 5.1.8. Each message shall contain a maximum of 242 octets.
moreAssDataToBeSent
ENUMERATED
1 or 0.
If SS sends more than one RRLP assistance data delivery message the moreAssDataToBeSent field shall be set accordingly.
extended-reference
SEQUENCE
Rel 5 and later
RRLP Assistance Data Ack (Step 12n):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
assistanceDataAck
FACILITY (Step 13):
Information element
Value/remark
Protocol Discriminator
Call Independent SS message (1011)
Transaction Identifier
Message Type
FACILITY (0011 1010 )
Facility
Return Result = LCS-MOLR
LCS-MOLRRes -> empty (Note)
Note: For acknowledgement of assistance data delivery procedure, SS shall send LCS-MOLR Facility return result to MS, there is no parameter for this.
RELEASE COMPLETE (Step 14):
Information element
Value/remark
Protocol Discriminator
Call Independent SS (1011)
Transaction Identifier
Message Type
RELEASE COMPLETE (0011 1010)
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.8.5.2 MO_LR Basic Self Location Request in Dedicated Mode (Normal case)
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.8.5.2.1 Conformance Requirement:
|
The following requirements apply for this test:
1. The MS sends CM SERVICE REQUEST to network for call independent supplementary service.
2. The MS invokes self-location request by sending a REGISTER message containing a LCS-MOLR invoke
component with MO_LR TYPE set to ASSISTANCE DATA, LOCATION_METHOD TYPE set
ASSISTEDGPS, and GPS_ASSISTANCE_DATA TYPE set to the type of ASSISTANCE_DATA requested.
3. The MS sends RRLP ASSISTANCE DATA ACK. for each RRLP ASSISTANCE DATA component.
4. The MS shall terminate the dialogue by sending a RELEASE COMPLETE message.
Test References:
3GPP TS 03.71 sub clause 7.6.6
3Gpp TS 24.30 sub clause 5
3GPP TS 24.80 sub clause 4
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.8.5.2.2 Test Purpose
|
To verify that the MS invokes a self-location request by sending the network a REGISTER message containing the FACILITY IE LCS-MOLR REQ on an already established speech call related main DCCH (FACCH). On receipt of a RRLP ASSISTANCE DATA from SS with the requested assistance data, MS shall send back RRLP ASSISTANCE ACK for each component to SS. When the MS receives a FACILITY message containing a FACILITY IE LCS-MOLR return result for the acknowledgment of completing assistance data delivery, it clears the transaction by sending a RELEASE COMPLETE message.
Specific PICS statements
- TSPC_MS_RRLP_RELEASE
PIXIT statements
-
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.8.5.2.3 Method of Test
|
Initial Conditions:
System Simulator:
Serving Cell: default parameters.
Satellite signals: default conditions.
Mobile Station:
The MS has valid TMSI and CSKN.
The MS is brought into the state U10 by using table 26.8.1.2/3
Test Procedure:
A MOLR procedure as call independent supplementary services is initiated from the MS on the existing FACCH channel. After received CM SERVICE ACCEPT message, MS sends a REGISTER message with Facility IE containing a component set to a DTAP LCS-MOLR Invoke for Assistance Data. The SS sends a number of RRLP ASSISTANCE DATA components and MS sends acknowledgement of RRLP ASSISTANCE DATA ACK for each component. SS sends DTAP LCS-MOLR Return Result for acknowledgement of completion of assistance data delivery procedure. MS performs the measurement and calculates the location estimate using the assistance data delivered. The MS terminates the dialogue by sending RELEASE COMPLETE message.
Maximum duration of the test:
5 minutes.
Expected Sequence:
Step
Direction
Message
Comments
1
MS
Initiate LCS MOLR Procedure (assistance data request) on existing FACCH channel
2
MS -> SS
CM SERVICE REQUEST
"Mobile identity" IE contains the TMSI.
Establishment cause indicates "Supplementary service activation"
"mobile station classmark 2" including settings for ES IND and CM3 supported.
3
SS -> MS
CM SERVICE ACCEPT
4
MS -> SS
REGISTER
Call Independent SS containing Facility IE
With the component of Invoke message set to LCS-MOLR with MOLR-Type set to assistanceData.
5n
SS->MS
RR APPLICATION INFORMATION
RRLP ASSISTANCE DATA
The number of instances of this message depends on the amount of assistance data requested in step 4
6n
MS -> SS
RR APPLICATION INFORMATION
RRLP ASSISTANCE DATA ACK
Each instance of RRLP ASSISTANCE DATA message in step 5 is acknowledged
7
SS -> MS
FACILITY
LCS MO-LR RETURN RESULT
8
MS->SS
RELEASE COMPLETE
Terminates the session
9
SS -> MS
CHANNEL RELEASE
The main signalling link is released.
Specific Message Contents:
REGISTER (Step 4):
Information element
Value/remark
Protocol Discriminator
Call Independent SS message (1011)
Transaction Identifier
Message Type
REGISTER (xx11 1011)
Facility
Invoke = LCS-MOLR
LCS-MOLRArg
MOLR-Type->assistanceData
Location Method->assistedGPS
GPSAssistanceData-> any value is acceptable
RR_APPLICATION_INFORMATION
Information element
Value/remark
Protocol Discriminator
RR Management Protocol (0110)
Skip Indicator
Message Type
Application Information Message type
APDU ID
APDU ID -> RRLP => 0000
APDU Flags
Bit1=0 -> Last or only segment
Bit2=0 -> First or only segment
Bit3=0 -> Command or Final Response
Bit4=spare
APDU Data
2-N Byte ASN.1 Coded
Step 5n: RRLP Assistance Data
Step 6n: RRLP Assistance Data Ack.
RRLP Assistance Data (Step 5n):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
The assistance data requested by the MS in Step 4 that is available in the SS, shall be sent in zero, one or more RRLP Assistance Data messages containing the requested assistance data from TS 51.010-7 sub clauses 5.1.3 to 5.1.8. Each message shall contain a maximum of 242 octets.
moreAssDataToBeSent
ENUMERATED
1 or 0.
If SS sends more than one RRLP assistance data delivery message the moreAssDataToBeSent field shall be set accordingly.
extended-reference
SEQUENCE
Rel 5 and later
RRLP Assistance Data Ack (Step 6n):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
assistanceDataAck
FACILITY (Step 7):
Information element
Value/remark
Protocol Discriminator
Call Independent SS message (1011)
Transaction Identifier
Message Type
FACILITY (0011 1010 )
Facility
Return Result = LCS-MOLR
LCS-MOLRRes ->empty (note)
Note: For acknowledgement of assistance data delivery procedure, SS shall send LCS-MOLR Facility return result to MS, there is no parameter for this.
RELEASE COMPLETE (Step 8):
Information element
Value/remark
Protocol Discriminator
Call Independent SS (1011)
Transaction Identifier
Message Type
RELEASE COMPLETE (xx10 1010)
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.8.5.3 MO_LR Basic Self Location Request in Idle Mode (Alternative Case)
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.8.5.3.1 Conformance requirements:
|
The following requirements apply for this test:
1. If the MS is in idle mode, the MS requests an SDCCH and sends a DTAP CM service request indicating a request for call independent supplementary services to the BSC.
2. The MS invokes a MO-LR by sending a REGISTER message to the network containing a LCS-MOLR invoke component. SS Version Indicator value 1 or above shall be used.
3. On receiving an RRLP MEASURE POSITION REQUEST message, the MS tries to perform the requested location measurements, and possibly calculates it own position. When the MS has location measurements, location estimate, or an error indication (measurements/location estimation not possible), it sends the results in the Measure Position Response component to the SMLC.
5. The network shall pass the result of the location procedure to the MS by sending a FACILITY message to the MS containing a LCS-MOLR return result component.
6. After the last location request operation the MS shall terminate the dialogue by sending a RELEASE COMPLETE message.
Test References
3GPP TS 03.71 sub clause 7.6.6
3GPP TS 04.30 sub clause 5.1.1
3GPP TS 04.31 sub clause 2.2
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.8.5.3.2 Test Purpose
|
To verify that the MS invokes a self-location request by sending the network a REGISTER message containing an MO-LR Request of type “locationEstimate”. When the MS receives a FACILITY message containing a MO-LR return result carrying the requested location estimate, it clears the transaction by sending a RELEASE COMPLETE message.
Specific PICS statements
- TSPC_MS_RRLP_RELEASE
PIXIT statements
-
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.8.5.3.3 Method of Test
|
Initial Conditions
System Simulator:
Serving cell: default parameters.
Satellite signals: default conditions.
Mobile Station:
The MS is in MM-state "idle, updated" with valid TMSI and CKSN.
Test Procedure:
The MS invokes call independent supplementary service through a CM SERVICE REQUEST. The SS initiates authentication and ciphering. Then the MS invokes an MO-LR request of type “locationEstimate”.
The SS orders an A-GPS positioning measurement by sending RR APPLICATION INFORMATION messages containing RRLP Assistance Data messages followed by an RRLP Measure Position Request including further assistance data.
Option 1: The MS then performs positioning measurements, and responds with an RR APPLICATION INFORMATION message containing an RRLP Measure Position Response.
Option 2: The MS may request additional assistance data by sending an RRLP Measure Position Response message containing a location error with IE LocErrorReason set to gpsAssDataMissing. If the MS requests additional assistance data that is available in the SS, then the SS provides the requested assistance data in zero, one or more RRLP Assistance Data delivery messages followed by an RRLP Measure Position Request message which may include further assistance data. If the MS requests additional assistance data and the entire requested assistance data is not available in the SS, then the SS repeats the RRLP Measure Position Request message without assistance data. The MS then performs positioning measurements, and responds with an RR APPLICATION INFORMATION message containing an RRLP Measure Position Response.
The SS responds with a FACILITY message containing an MO-LR result. When the MS receives the FACILITY message, it clears the transaction by sending a RELEASE COMPLETE message.
Maximum duration of the test:
5 minutes.
Expected Sequence
Step
Direction
Message
Comments
1
MS
Initiate MOLR Procedure (location estimation)
2
MS -> SS
CHANNEL REQUEST
Establishment cause indicates "Other procedures which can be completed with an SDCCH"
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS -> SS
CM SERVICE REQUEST
The CM Service Type IE indicates "Supplementary service activation".
5
MS -> SS
CLASSMARK CHANGE
"mobile station classmark 2" includes settings for ES_IND.
"mobile station classmark 3" includes settings for Positioning. The setting for positioning specifies Positioning Method capability and Positioning Method support. In the position method support (5 bit filed), bit 2 is set to 1 (MS-based GPS).
6
SS -> MS
AUTHENTICATION REQUEST
7
MS -> SS
AUTHENTICATION RESPONSE
8
SS -> MS
CIPHERING MODE COMMAND
9
MS -> SS
CIPHERING MODE COMPLETE
10
SS
SS starts ciphering
11
MS -> SS
REGISTER
Call Independent SS containing Facility IE
with LCS-MOLR request and MO-LR Type set to “locationEstimate”.
12
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data
13
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck
14
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data
15
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck
16
SS-> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request
17
MS -> SS
RR APPLICATION INFORMATION
RRLP Measure Position Response:
locationInfo (Option 1)
or
locationError with gpsAssDataMissing and additionalAssistanceData (Option 2)
17a
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data.
If the MS requested additional assistance data in step 17 that is available in the SS, then SS provides the requested data in zero, one or more RRLP Assistance Data delivery messages.
17b
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck.
If the SS sent additional assistance data in step 17a, the MS acknowledges the received assistance data.
17c
SS-> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request.
If the MS requested additional assistance data in step 17 that is available in the SS, this message may include further assistance data.
17d
MS-> SS
RR APPLICATION INFORMATION
RRLP Measure Position Response.
If the MS requested additional assistance data in step 17, this message contains locationInfo.
18
SS -> MS
FACILITY
LCS MO-LR RETURN RESULT message containing location estimate
19
MS -> SS
RELEASE COMPLETE
MS terminates the dialogue
20
SS -> MS
CHANNEL RELEASE
The main signalling link is released.
Specific Message Contents
REGISTER (Step 11):
Information element
Value/remark
Protocol Discriminator
Call Independent SS (1011)
Transaction Identifier
Message Type
REGISTER (xx11 1011)
Facility
Invoke = LCS-MOLR
LCS-MOLRArg
MOLR-Type->locationEstimate
SS version indicator
Value 1 or above
RR_APPLICATION_INFORMATION
Information element
Value/remark
Protocol Discriminator
RR Management Protocol (0110)
Skip Indicator
Message Type
Application Information Message type
APDU ID
APDU ID -> RRLP => 0000
APDU Flags
Bit1=0 -> Last or only segment
Bit2=0 -> First or only segment
Bit3=0 -> Command or Final Response
Bit4=spare
APDU Data
2-N Byte ASN.1 Coded
Steps 16 and 17c: RRLP Measure Position Request
Steps 17 and 17d: RRLP Measure Position Response
Steps 12, 14, 17a: RRLP Assistance Data
Steps 13, 15, 17b: RRLP Assistance Data Ack.
RRLP Assistance Data (Step 12):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
navigationModel
SEQUENCE
PRNs 4,6,9. See TS 51.010-7 sub clause 5.1.5
moreAssDataToBeSent
ENUMERATED
1
extended-reference
SEQUENCE
Rel 5 and later
RRLP Assistance Data Ack (Steps 13, 15, 17b):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1 or 2 (Option 2, Step 17b)
component
CHOICE
assistanceDataAck
RRLP Assistance Data (Step 14):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
navigationModel
SEQUENCE
PRNs 10,13,22. See TS 51.010-7 sub clause 5.1.5
ionosphericModel
SEQUENCE
See TS 51.010-7 sub clause 5.1.6
moreAssDataToBeSent
ENUMERATED
R98, R99, Rel 4: 0.
Rel 5 and later: 1
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Request (Step 16):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
msrPositionReq
methodType
CHOICE
msBased
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
5
accuracy
Integer (0-127)
127
useMultipleSets
ENUMERATED
oneSet
gps-AssistData
SEQUENCE
referenceTime
SEQUENCE
See TS 51.010-7 sub clause 5.1.3
refLocation
SEQUENCE
See TS 51.010-7 sub clause 5.1.4
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Response (Step 17 (Option 1) or 17d (Option 2)):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1 or 2 (Option 2, Step 17d)
component
CHOICE
msrPositionRsp
(A valid response will contain LocationInfo otherwise LocationError will be returned)
locationInfo
SEQUENCE
Any value is acceptable.
locationError
SEQUENCE
Any error value is acceptable except gpsAssDataMissing.
extended-reference
SEQUENCE
Rel5 and later
The value returned by the MS shall equal the value received from the SS in the earlier Measure Position Request
RRLP Measure Position Response (Step 17 (Option 2)):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
msrPositionRsp
locationError
SEQUENCE
locErrorReason
ENUMERATED
gpsAssDataMissing
additionalAssistanceData
SEQUENCE
gpsAssistanceData
OCTET STRING
Indicates missing assistance data elements
RRLP Assistance Data (Step 17a):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
If the MS requested further assistance data in Step 17 (Option 2) that is available in the SS, SS shall send zero, one or more RRLP Assistance Data messages containing the requested assistance data from TS 51.010-7 sub clauses 5.1.3 to 5.1.8. Each message shall contain a maximum of 242 octets.
moreAssDataToBeSent
ENUMERATED
R98, R99, Rel 4: 1 or 0.
If SS sends more than one RRLP assistance data delivery message the moreAssDataToBeSent field shall be set accordingly.
Rel 5 and later: 1, except in the case of the final Assistance Data message when the following Measure Position Request contains no additional Assistance Data (in which case: 0)
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Request (Step 17c):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
msrPositionReq
methodType
CHOICE
msBased
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
5
accuracy
Integer (0-127)
127
useMultipleSets
ENUMERATED
oneSet
gps-AssistData
SEQUENCE
May contain further assistance data from TS 51.010-7 as requested by the MS in step 17 (Option 2).
extended-reference
SEQUENCE
Rel 5 and later
FACILITY (Step 18):
Information element
Value/remark
Protocol Discriminator
Call Independent SS (1011)
Transaction Identifier
Message Type
FACILITY (0011 1010 )
Facility
Return Result = LCS-MOLR
LCS-MOLRRes -> locationEstimate
RELEASE COMPLETE (Step 20):
Information element
Value/remark
Protocol Discriminator
Call Independent SS (1011)
Transaction Identifier
Message Type
RELEASE COMPLETE (xx10 1010)
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.8.5.4 MO_LR Basic Self Location Request in Dedicated Mode (Alternative Case)
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.8.5.4.1 Conformance requirements:
|
The following requirements apply for this test:
1. The MS sends CM SERVICE REQUEST to network for call independent supplementary service.
2. The MS invokes a MO-LR by sending a REGISTER message to the network containing a LCS-MOLR invoke component. SS Version Indicator value 1 or above shall be used.
3. On receiving an RRLP MEASURE POSITION REQUEST message, the MS tries to perform the requested location measurements, and possibly calculates it own position. When the MS has location measurements, location estimate, or an error indication (measurements/location estimation not possible), it sends the results in the Measure Position Response component to the SMLC.
5. The network shall pass the result of the location procedure to the MS by sending a FACILITY message to the MS containing a LCS-MOLR return result component.
6. After the last location request operation the MS shall terminate the dialogue by sending a RELEASE COMPLETE message.
Test References
3GPP TS 03.71 sub clause 7.6.6
3GPP TS 04.30 sub clause 5.1.1
3GPP TS 04.31 sub clause 2.2
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.8.5.4.2 Test Purpose
|
To verify that the MS invokes a self-location request by sending the network a REGISTER message containing an MO-LR Request of type “locationEstimate” on an already established speech call related SACCH. When the MS receives a FACILITY message containing a MO-LR return result carrying the requested location estimate, it clears the transaction by sending a RELEASE COMPLETE message.
Specific PICS statements
- TSPC_MS_RRLP_RELEASE
PIXIT statements
-
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.8.5.4.3 Method of Test
|
Initial Conditions
System Simulator:
Serving cell: default parameters.
Satellite signals: default conditions.
Mobile Station:
The MS has valid TMSI and CKSN.
The MS is brought into state U10 by using table 26.8.1.2/3.
Test Procedure:
The MS invokes call independent supplementary service on an existing SACCH channel. After receiving a CM SERVICE ACCEPT message, the MS invokes a self location request by sending a REGISTER message containing an MO-LR request of type “locationEstimate”.
The SS orders an A-GPS positioning measurement by sending RR APPLICATION INFORMATION messages containing RRLP Assistance Data messages followed by an RRLP Measure Position Request including further assistance data.
Option 1: The MS then performs positioning measurements, and responds with an RR APPLICATION INFORMATION message containing an RRLP Measure Position Response.
Option 2: The MS may request additional assistance data by sending an RRLP Measure Position Response message containing a location error with IE LocErrorReason set to gpsAssDataMissing. If the MS requests additional assistance data that is available in the SS, then the SS provides the requested assistance data in zero, one or more RRLP Assistance Data delivery messages followed by an RRLP Measure Position Request message which may include further assistance data. If the MS requests additional assistance data and the entire requested assistance data is not available in the SS, then the SS repeats the RRLP Measure Position Request message without assistance data. The MS then performs positioning measurements, and responds with an RR APPLICATION INFORMATION message containing an RRLP Measure Position Response.
The SS responds with a FACILITY message containing an MO-LR result. When the MS receives the FACILITY message, it clears the transaction by sending a RELEASE COMPLETE message.
Maximum duration of the test:
5 minutes.
Expected Sequence
Step
Direction
Message
Comments
1
MS
Initiate MO-LR procedure (location estimation) on existing SACCH channel
2
MS -> SS
CM SERVICE REQUEST
The CM Service Type IE indicates "Supplementary service activation".
3
SS -> MS
CM SERVICE ACCEPT
4
MS -> SS
REGISTER
Call Independent SS containing Facility IE
with LCS-MOLR request and MO-LR Type set to “locationEstimate”.
5
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data
6
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck
7
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data
8
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck
9
SS-> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request
10
MS -> SS
RR APPLICATION INFORMATION
RRLP Measure Position Response:
locationInfo (Option 1)
or
locationError with gpsAssDataMissing and additionalAssistanceData (Option 2)
10a
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data.
If the MS requested additional assistance data in step 10 that is available in the SS, then SS provides the requested data in zero, one or more RRLP Assistance Data delivery messages.
10b
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck.
If the SS sent additional assistance data in step 10a, the MS acknowledges the received assistance data.
10c
SS-> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request.
If the MS requested additional assistance data in step 10 that is available in the SS, this message may include further assistance data.
10d
MS-> SS
RR APPLICATION INFORMATION
RRLP Measure Position Response.
If the MS requested additional assistance data in step 10, this message contains locationInfo.
11
SS -> MS
FACILITY
LCS MO-LR RETURN RESULT message containing location estimate
12
MS -> SS
RELEASE COMPLETE
MS terminates the dialogue
13
SS -> MS
CHANNEL RELEASE
The main signalling link is released.
Specific Message Contents
REGISTER (Step 4):
Information element
Value/remark
Protocol Discriminator
Call Independent SS (1011)
Transaction Identifier
Message Type
REGISTER (xx11 1011)
Facility
Invoke = LCS-MOLR
LCS-MOLRArg
MOLR-Type->locationEstimate
SS version indicator
Value 1 or above
RR_APPLICATION_INFORMATION
Information element
Value/remark
Protocol Discriminator
RR Management Protocol (0110)
Skip Indicator
Message Type
Application Information Message type
APDU ID
APDU ID -> RRLP => 0000
APDU Flags
Bit1=0 -> Last or only segment
Bit2=0 -> First or only segment
Bit3=0 -> Command or Final Response
Bit4=spare
APDU Data
2-N Byte ASN.1 Coded
Steps 9 and 10c: RRLP Measure Position Request
Steps 10 and 10d: RRLP Measure Position Response
Steps 5, 7, 10a: RRLP Assistance Data
Steps 6, 8, 10b: RRLP Assistance Data Ack.
RRLP Assistance Data (Step 5):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
navigationModel
SEQUENCE
PRNs 4,6,9. See TS 51.010-7 sub clause 5.1.5
moreAssDataToBeSent
ENUMERATED
1
extended-reference
SEQUENCE
Rel 5 and later
RRLP Assistance Data Ack (Steps 6, 8, 10b):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1 or 2 (Option 2, Step 10b)
component
CHOICE
assistanceDataAck
RRLP Assistance Data (Step 7):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
navigationModel
SEQUENCE
PRNs 10,13,22. See TS 51.010-7 sub clause 5.1.5
ionosphericModel
SEQUENCE
See TS 51.010-7 sub clause 5.1.6
moreAssDataToBeSent
ENUMERATED
R98, R99, Rel 4: 0.
Rel 5 and later: 1
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Request (Step 9):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
msrPositionReq
methodType
CHOICE
msBased
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
5
accuracy
Integer (0-127)
127
useMultipleSets
ENUMERATED
oneSet
gps-AssistData
SEQUENCE
referenceTime
SEQUENCE
See TS 51.010-7 sub clause 5.1.3
refLocation
SEQUENCE
See TS 51.010-7 sub clause 5.1.4
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Response (Step 10 (Option 1) or 10d (Option 2)):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1 or 2 (Option 2, Step 10d)
component
CHOICE
msrPositionRsp
(A valid response will contain LocationInfo otherwise LocationError will be returned)
locationInfo
SEQUENCE
Any value is acceptable.
locationError
SEQUENCE
Any error value is acceptable except gpsAssDataMissing.
extended-reference
SEQUENCE
Rel5 and later
The value returned by the MS shall equal the value received from the SS in the earlier Measure Position Request
RRLP Measure Position Response (Step 10 (Option 2)):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
msrPositionRsp
locationError
SEQUENCE
locErrorReason
ENUMERATED
gpsAssDataMissing
additionalAssistanceData
SEQUENCE
gpsAssistanceData
OCTET STRING
Indicates missing assistance data elements
extended-reference
SEQUENCE
Rel5 and later
The value returned by the MS shall equal the value received from the SS in the earlier Measure Position Request
RRLP Assistance Data (Step 10a):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
If the MS requested further assistance data in Step 10 (Option 2) that is available in the SS, SS shall send zero, one or more RRLP Assistance Data messages containing the requested assistance data from TS 51.010-7 sub clauses 5.1.3 to 5.1.8. Each message shall contain a maximum of 242 octets.
moreAssDataToBeSent
ENUMERATED
R98, R99, Rel 4: 1 or 0.
If SS sends more than one RRLP assistance data delivery message the moreAssDataToBeSent field shall be set accordingly.
Rel 5 and later: 1, except in the case of the final Assistance Data message when the following Measure Position Request contains no additional Assistance Data (in which case: 0)
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Request (Step 10c):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
msrPositionReq
methodType
CHOICE
msBased
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
5
accuracy
Integer (0-127)
127
useMultipleSets
ENUMERATED
oneSet
gps-AssistData
SEQUENCE
May contain further assistance data from TS 51.010-7 as requested by the MS in step 10 (Option 2).
extended-reference
SEQUENCE
Rel 5 and later
FACILITY (Step 11):
Information element
Value/remark
Protocol Discriminator
Call Independent SS (1011)
Transaction Identifier
Message Type
FACILITY (0011 1010 )
Facility
Return Result = LCS-MOLR
LCS-MOLRRes -> locationEstimate
RELEASE COMPLETE (Step 12):
Information element
Value/remark
Protocol Discriminator
Call Independent SS (1011)
Transaction Identifier
Message Type
RELEASE COMPLETE (xx10 1010)
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.8.6 MO-LR Transfer to 3rd Party for MS-Based A-GPS
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.8.6.1 Conformance requirements
|
The following requirements apply for this test:
1. If the MS is in idle mode, the MS requests an SDCCH and sends a DTAP CM service request indicating a request for call independent supplementary services to the BSC.
2. The MS invokes a MO-LR by sending a REGISTER message to the network containing a LCS-MOLR invoke component. SS Version Indicator value 1 or above shall be used.
3. If the MS is requesting that its location be sent to another LCS client, the message shall include the identity of the LCS client and may include the address of the GMLC through which the LCS client should be accessed.
4. On receiving an RRLP MEASURE POSITION REQUEST message, the MS tries to perform the requested location measurements, and possibly calculates it own position. When the MS has location measurements, location estimate, or an error indication (measurements/location estimation not possible), it sends the results in the Measure Position Response component to the SMLC.
5. The VMSC returns a DTAP LCS MO-LR Return Result to the MS carrying any location estimate requested by the MS, ciphering keys or a confirmation that a location estimate was successfully transferred to the GMLC serving an LCS client.
6. The network shall pass the result of the location procedure to the MS by sending a FACILITY message to the MS containing a LCS-MOLR return result component.
7. After the last location request operation the MS shall terminate the dialogue by sending a RELEASE COMPLETE message.
Test References
3GPP TS 03.71 sub clause 7.6.6
3GPP TS 04.30 sub clause 5.1.1
3GPP TS 04.31 sub clause 2.2
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.8.6.2 Test Purpose
|
To verify that the MS invokes a transfer of its own location to a 3rd party LCS Client by sending the network a REGISTER message containing the Facility IE LCS MO-LR with LCSClientExternalID present. After receiving a FACILITY message as confirmation that the location estimate has been transferred to the requested LCS client, the MS terminates the dialogue by sending a RELEASE COMPLETE message.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.8.6.3 Method of Test
|
Initial Conditions
System Simulator (SS):
Serving Cell: default parameters
Satellite signals: default conditions.
Mobile Station (MS):
The MS is in MM-state “idle, updated” with valid TMSI and CKSN.
Specific PICS statements
- TSPC_MS_RRLP_RELEASE
PIXIT statements
-
Test Procedure
The MS invokes call independent supplementary service through a CM SERVICE REQUEST. The SS initiates authentication and ciphering. Then the MS invokes an MO-LR request of type “locationEstimate” with “LCSClientExternalID” present.
The SS orders an A-GPS positioning measurement by sending RR APPLICATION INFORMATION messages containing RRLP Assistance Data messages followed by an RRLP Measure Position Request including further assistance data.
Option 1: The MS then performs positioning measurements, and responds with an RR APPLICATION INFORMATION message containing an RRLP Measure Position Response.
Option 2: The MS may request additional assistance data by sending an RRLP Measure Position Response message containing a location error with IE LocErrorReason set to gpsAssDataMissing. If the MS requests additional assistance data that is available in the SS, then the SS provides the requested assistance data in zero, one or more RRLP Assistance Data delivery messages followed by an RRLP Measure Position Request message which may include further assistance data. If the MS requests additional assistance data and the entire requested assistance data is not available in the SS, then the SS repeats the RRLP Measure Position Request message without assistance data. The MS then performs positioning measurements, and responds with an RR APPLICATION INFORMATION message containing an RRLP Measure Position Response.
The SS responds with a FACILITY message containing an MO-LR result to confirm that the location estimate has been transferred to the LCS client. When the MS receives the FACILITY message, it clears the transaction by sending a RELEASE COMPLETE message.
Maximum duration of the test
5 minutes.
Expected Sequence
Step
Direction
Message
Comments
1
MS
Initiate MOLR Transfer to 3rd Party Procedure
2
MS -> SS
CHANNEL REQUEST
Establishment cause indicates, "Other procedures which can be completed with an SDCCH"
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS -> SS
CM SERVICE REQUEST
The CM Service Type IE indicates "Supplementary service activation"
"mobile station classmark 2" includes settings for ES_IND.
5
MS->SS
CLASSMARK CHANGE
"mobile station classmark 2" includes settings for ES_IND.
"mobile station classmark 3" includes settings for Positioning. The setting for positioning specifies Positioning Method capability and Positioning Method Support. In the position method support (5 bit field), Bit 2 is set to 1 (MS-Based GPS)
6
SS -> MS
AUTHENTICATION REQUEST
7
MS -> SS
AUTHENTICATION RESPONSE
8
SS -> MS
CIPHERING MODE COMMAND
9
MS -> SS
CIPHERING MODE COMPLETE
10
SS
SS starts ciphering
11
MS -> SS
REGISTER
Call Independent SS containing Facility IE with
LCS-MOLR request with
MOLR-Type set to locationEstimate with LCSClientExternalID present
12
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data
13
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck
14
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data
15
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck
16
SS-> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request
17
MS -> SS
RR APPLICATION INFORMATION
RRLP Measure Position Response:
locationInfo (Option 1)
or
locationError with gpsAssDataMissing and additionalAssistanceData (Option 2)
17a
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data.
If the MS requested additional assistance data in step 17 that is available in the SS, then SS provides the requested data in zero, one or more RRLP Assistance Data delivery messages.
17b
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck.
If the SS sent additional assistance data in step 17a, the MS acknowledges the received assistance data.
17c
SS-> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request.
If the MS requested additional assistance data in step 17 that is available in the SS, this message may include further assistance data.
17d
MS-> SS
RR APPLICATION INFORMATION
RRLP Measure Position Response.
If the MS requested additional assistance data in step 17, this message contains locationInfo.
18
SS
SS may return the location estimate result to the LCS Client as identified by the LCSClientExternalID provided in the REGISTER message
19
SS -> MS
FACILITY
LCS MO-LR Return Result message as confirmation that the position estimate was transferred to the requested LCS client.
20
MS -> SS
RELEASE COMPLETE
MS terminates the dialogue
21
SS -> MS
CHANNEL RELEASE
The main signalling link is released.
Specific Message Contents
REGISTER (Step 11):
Information element
Value/remark
Protocol Discriminator
Call Independent SS (1011)
Transaction Identifier
Message Type
REGISTER (xx11 1011)
Facility
Invoke = LCS-MOLR
LCS-MOLRArg
Molr-Type -> locationEstimate
lcsClientExternalID -> externalAddress
SS version indicator
Value 1 or above
RR_APPLICATION_INFORMATION
Information element
Value/remark
Protocol Discriminator
RR Management Protocol (0110)
Skip Indicator
Message Type
Application Information Message type
APDU ID
APDU ID -> RRLP => 0000
APDU Flags
Bit1=0 -> Last or only segment
Bit2=0 -> First or only segment
Bit3=0 -> Command or Final Response
Bit4=spare
APDU Data
2-N Byte ASN.1 Coded
Steps 16 and 17c: RRLP Measure Position Request
Steps 17 and 17d: RRLP Measure Position Response
Steps 12, 14, 17a: RRLP Assistance Data
Steps 13, 15, 17b: RRLP Assistance Data Ack.
RRLP Assistance Data (Step 12):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
navigationModel
SEQUENCE
PRNs 4,6,9. See TS 51.010-7 sub clause 5.1.5
moreAssDataToBeSent
ENUMERATED
1
extended-reference
SEQUENCE
Rel 5 and later
RRLP Assistance Data Ack (Steps 13, 15, 17b):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1 or 2 (Option 2, Step 17b)
component
CHOICE
assistanceDataAck
RRLP Assistance Data (Step 14):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
navigationModel
SEQUENCE
PRNs 10,13,22. See TS 51.010-7 sub clause 5.1.5
ionosphericModel
SEQUENCE
See TS 51.010-7 sub clause 5.1.6
moreAssDataToBeSent
ENUMERATED
R98, R99, Rel 4: 0.
Rel 5 and later: 1
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Request (Step 16):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
msrPositionReq
methodType
CHOICE
msBased
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
5
accuracy
Integer (0-127)
127
useMultipleSets
ENUMERATED
oneSet
gps-AssistData
SEQUENCE
referenceTime
SEQUENCE
See TS 51.010-7 sub clause 5.1.3
refLocation
SEQUENCE
See TS 51.010-7 sub clause 5.1.4
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Response (Step 17 (Option 1) or 17d (Option 2)):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1 or 2 (Option 2, Step 17d)
component
CHOICE
msrPositionRsp
(A valid response will contain LocationInfo otherwise LocationError will be returned)
locationInfo
SEQUENCE
Any value is acceptable.
locationError
SEQUENCE
Any error value is acceptable except gpsAssDataMissing.
extended-reference
SEQUENCE
Rel5 and later
The value returned by the MS shall equal the value received from the SS in the earlier Measure Position Request
RRLP Measure Position Response (Step 17 (Option 2)):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
msrPositionRsp
locationError
SEQUENCE
locErrorReason
ENUMERATED
gpsAssDataMissing
additionalAssistanceData
SEQUENCE
gpsAssistanceData
OCTET STRING
Indicates missing assistance data elements
extended-reference
SEQUENCE
Rel5 and later
The value returned by the MS shall equal the value received from the SS in the earlier Measure Position Request
RRLP Assistance Data (Step 17a):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
If the MS requested further assistance data in Step 17 (Option 2) that is available in the SS, SS shall send zero, one or more RRLP Assistance Data messages containing the requested assistance data from TS 51.010-7 sub clauses 5.1.3 to 5.1.8. Each message shall contain a maximum of 242 octets.
moreAssDataToBeSent
ENUMERATED
R98, R99, Rel 4: 1 or 0.
If SS sends more than one RRLP assistance data delivery message the moreAssDataToBeSent field shall be set accordingly.
Rel 5 and later: 1, except in the case of the final Assistance Data message when the following Measure Position Request contains no additional Assistance Data (in which case: 0)
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Request (Step 17c):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
msrPositionReq
methodType
CHOICE
msBased
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
5
accuracy
Integer (0-127)
127
useMultipleSets
ENUMERATED
oneSet
gps-AssistData
SEQUENCE
May contain further assistance data from TS 51.010-7 as requested by the MS in step 17 (Option 2).
extended-reference
SEQUENCE
Rel 5 and later
FACILITY (Step 19):
Information element
Value/remark
Protocol Discriminator
Call Independent SS (1011)
Transaction Identifier
Message Type
FACILITY (0011 1010)
Facility
Return Result = LCS-MOLR
LCS-MOLRRes -> locationEstimate
RELEASE COMPLETE (Step 20):
Information element
Value/remark
Protocol Discriminator
Call Independent SS (1011)
Transaction Identifier
Message Type
RELEASE COMPLETE (xx10 1010)
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9 Assisted GPS Mobile Terminated Tests
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.1 MT-LR Location Notification
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.1.1 MT-LR Location Notification for Mobiles Supporting MS-Based GPS
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.1.1.1 Conformance requirements
|
1. The network invokes a location notification procedure by sending a REGISTER message containing a LCS-LocationNotification invoke component to the MS with notificationType set to notifyLocationAllowed. The MS shall notify the MS user of the location request.
2. The MS shall terminate the dialogue by sending a RELEASE COMPLETE message containing a LocationNotification return result with verificationResponse set to permissionGranted.
References
3GPP TS 03.71 sub clause 7.6.1.
3GPP TS 04.30 sub clause 4.1.1.
3GPP TS 04.80 / 3GPP TS 24.080 sub clauses 2.4, 2.5, and 3.4.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.1.1.2 Test Purpose
|
To verify that when the MS receives a REGISTER message, containing a LCS Location Notification Invoke component set to NotifyLocationAllowed, the MS displays information about the LCS client correctly and sends a RELEASE COMPLETE message containing a LocationNotification return result with verificationResponse set to permissionGranted.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.1.1.3 Method of Test
|
Initial Conditions
System Simulator (SS):
Serving Cell: default parameters
Mobile Station (MS):
The MS is in MM-state “idle, updated” with valued TMSI and CKSN.
Specific PICS statements
-
PIXIT statements
-
Test Procedure
The MS is paged with a PAGING REQUEST TYPE 1 message. After sending the CIPHERING MODE COMPLETE message the MS receives an SS REGISTER message containing a Facility IE containing a DTAP LCS Location Notification Invoke message set to notifyLocationAllowed. The LCS Client Name contained in the USSD text string of the lcs-LocationNotification shall be displayed. The MS then responds with a RELEASE COMPLETE message containing a LocationNotification return to terminate the dialogue.
Maximum duration of the test
5 minutes.
Expected Sequence
Step
Direction
Message
Comments
1
SS->MS
PAGING REQUEST TYPE I
2
MS -> SS
CHANNEL REQUEST
Establishment cause indicates “answer to paging”.
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS->SS
PAGING RESPONSE
Message is contained in SABM.
“mobile station classmark 2” includes settings for ES_IND.
5
MS->SS
CLASSMARK CHANGE
“mobile station classmark 2” includes settings for ES_IND.
“mobile station classmark 3” includes settings for Positioning. The setting for positioning specifies Positioning Method capability and Positioning Method Support. In the position method support (5 bit field), Bit 2 is set to 1 (MS-Based GPS)
6
SS -> MS
AUTHENTICATION REQUEST
7
MS -> SS
AUTHENTICATION RESPONSE
8
SS -> MS
CIPHERING MODE COMMAND
9
MS -> SS
CIPHERING MODE COMPLETE
10
SS
SS starts ciphering.
11
SS -> MS
REGISTER
Call Independent SS containing Facility IE
Location Notification Invoke message set to notifyLocationAllowed
12
MS
MS displays information about LCS client
13
MS -> SS
RELEASE COMPLETE
14
SS -> MS
CHANNEL RELEASE
The main signalling link is released.
Specific Message Contents
PAGING RESPONSE
Information element
Value/remark
Protocol Discriminator
RR management
Ciphering Key Sequence number
- Key Sequence
Key sequence number previously allocated to MS, or "111" if no key is available
Mobile station Classmark 2
- ES IND
Shall indicate early autonomous sending of CLASSMARK CHANGE
Mobile Identity
- odd/even
Even
- Type of identity
TMSI
- Identity digits
TMSI previously allocated to MS
REGISTER
Information element
Value/remark
Protocol Discriminator
Call Independent SS message (1011)
Transaction identifier
Message type
REGISTER (0011 1011)
Facility
Invoke = lcs-LocationNotification
LocationNotificationArg
notificationType -> notifyLocationAllowed,
locationType -> current Location ,
lcsClientExternalID -> externalAddress
lcsClientName ->dataCodingScheme
nameString
RELEASE COMPLETE
Information element
Value/remark
Protocol Discriminator
Call Independent SS message (1011)
Transaction identifier
Message type
RELEASE COMPLETE (xx10 1010)
Facility
Return result = lcs-LocationNotification
verificationResponse -> permissionGranted
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.1.2 MT-LR Location Notification for Mobiles Supporting MS-Assisted GPS
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.1.2.1 Conformance requirements
|
1. The network invokes a location notification procedure by sending a REGISTER message containing a LCS-LocationNotification invoke component to the MS with notificationType set to notifyLocationAllowed. The MS shall notify the MS user of the location request.
2. The MS shall terminate the dialogue by sending a RELEASE COMPLETE message containing a LocationNotification return result with verificationResponse set to permissionGranted.
References
3GPP TS 03.71 sub clause 7.6.1.
3GPP TS 04.30 sub clause 4.1.1.
3GPP TS 04.80 / 3GPP TS 24.080 sub clauses 2.4, 2.5, and 3.4.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.1.2.2 Test Purpose
|
To verify that when the MS receives a REGISTER message, containing a LCS Location Notification Invoke component set to NotifyLocationAllowed, the MS displays information about the LCS client correctly and sends a RELEASE COMPLETE message containing a LocationNotification return result with verificationResponse set to permissionGranted.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.1.2.3 Method of Test
|
Initial Conditions
System Simulator (SS):
Serving Cell: default parameters
Mobile Station (MS):
The MS is in MM-state “idle, updated” with valued TMSI and CKSN.
Specific PICS statements
-
PIXIT statements
-
Test Procedure
The MS is paged with a PAGING REQUEST TYPE 1 message. After sending the CIPHERING MODE COMPLETE message the MS receives an SS REGISTER message containing a Facility IE containing a DTAP LCS Location Notification Invoke message set to notifyLocationAllowed. The LCS Client Name contained in the USSD text string of the lcs-LocationNotification shall be displayed. The MS then responds with a RELEASE COMPLETE message containing a LocationNotification return to terminate the dialogue.
Maximum duration of the test
5 minutes.
Expected Sequence
Step
Direction
Message
Comments
1
SS->MS
PAGING REQUEST TYPE I
2
MS -> SS
CHANNEL REQUEST
Establishment cause indicates “answer to paging”.
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS->SS
PAGING RESPONSE
Message is contained in SABM.
“mobile station classmark 2” includes settings for ES_IND.
5
MS->SS
CLASSMARK CHANGE
“mobile station classmark 2” includes settings for ES_IND.
“mobile station classmark 3” includes settings for Positioning. The setting for positioning specifies Positioning Method capability and Positioning Method Support. In the position method support (5 bit field), Bit 3 is set to 1 (MS-Assisted GPS)
6
SS -> MS
AUTHENTICATION REQUEST
7
MS -> SS
AUTHENTICATION RESPONSE
8
SS -> MS
CIPHERING MODE COMMAND
9
MS -> SS
CIPHERING MODE COMPLETE
10
SS
SS starts ciphering.
11
SS -> MS
REGISTER
Call Independent SS containing Facility IE
Location Notification Invoke message set to notifyLocationAllowed
12
MS
MS displays information about LCS client
13
MS -> SS
RELEASE COMPLETE
14
SS -> MS
CHANNEL RELEASE
The main signalling link is released.
Specific Message Contents
PAGING RESPONSE
Information element
Value/remark
Protocol Discriminator
RR management
Ciphering Key Sequence number
- Key Sequence
Key sequence number previously allocated to MS, or "111" if no key is available
Mobile station Classmark 2
- ES IND
Shall indicate early autonomous sending of CLASSMARK CHANGE
Mobile Identity
- odd/even
Even
- Type of identity
TMSI
- Identity digits
TMSI previously allocated to MS
REGISTER
Information element
Value/remark
Protocol Discriminator
Call Independent SS message (1011)
Transaction identifier
Message type
REGISTER (0011 1011)
Facility
Invoke = lcs-LocationNotification
LocationNotificationArg
notificationType -> notifyLocationAllowed,
locationType -> current Location,
lcsClientExternalID -> externalAddress
lcsClientName ->dataCodingScheme
nameString
RELEASE COMPLETE
Information element
Value/remark
Protocol Discriminator
Call Independent SS message (1011)
Transaction identifier
Message type
RELEASE COMPLETE (xx10 1010)
Facility
Return result = lcs-LocationNotification
verificationResponse -> permissionGranted
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.2 MT-LR Privacy Options/Verification – Location Allowed If No Response
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.2.1 MT-LR Privacy Options/Verification– Location Allowed If No Response for mobiles supporting MS-Based GPS
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.2.1.1 Conformance requirements
|
1. On receipt of a REGISTER message containing the LCS Notification Invoke component with notificationType set to notifyAndVerify-LocationAllowedIfNoResponse. The MS: a) notifies the user of the request, b) indicates the default is location allowed if no response is received within a predetermined period, and c) providing the opportunity to accept or deny the request if allowed by subscription or if barred by subscription.
2.
Option 1: The user accepts the location request. The MS shall terminate the dialogue by sending a RELEASE COMPLETE message containing a LocationNotification return result with verificationResponse set to permissionGranted.
Option 2: The user denies the location request.
The MS shall terminate the dialogue by sending a RELEASE COMPLETE message containing a LocationNotification return result with verificationResponse set to permissionDenied.
Option 3: The user takes no action and the verification process times-out. The SS shall terminate the dialogue.
References
3GPP TS 03.71 sub clause 7.6.1.
3GPP TS 04.30 / 3GPP TS 24.030 Rel-6 sub clause 4.1.1.
3GPP TS 04.80 / 3GPP TS 24.080 sub clauses 2.4, 2.5, and 3.4.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.2.1.2 Test Purpose
|
To verify that the MS receives a REGISTER message, containing a LCS Location Notification Invoke component set to notifyAndVerify-LocationAllowedIfNoResponse, the MS displays information about the LCS client correctly and indicates that the default response is location allowed if no response is sent. Gives the user the option to accept or reject the request and sends a RELEASE COMPLETE message containing a LocationNotification return result with the verificationResponse set to permissionDenied or permissionGranted as appropriate.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.2.1.3 Method of Test
|
Initial Conditions
System Simulator (SS):
Serving Cell: default parameters.
Mobile Station (MS):
The MS is in MM-state “idle, updated” with valid TMSI and CKSN.
Specific PICS statements
-
PIXIT statements
- MS LCS Notification timeout timer
Test Procedure
The MS is paged with a PAGING REQUEST TYPE 1 message. After sending the CIPHERING MODE COMPLETE message the MS receives an SS REGISTER message with a Facility IE containing a LCS Location Notification Invoke set to notifyAndVerify-LocationAllowedIfNoResponse. The LCS Client Name contained in the USSD text string of the lcs-LocationNotification shall be displayed with the option to accept or deny the request, if allowed by subscription or if barred by subscription respectively. The MS also indicates that location will be allowed if a response is not received within a predetermined time.
Option 1:
The user then accepts the location request. The MS responds with a RELEASE COMPLETE message containing a LocationNotification return result with verificationResponse set to permissionGranted.
Option 2:
The user then denies the location request. The MS responds with a RELEASE COMPLETE message containing a LocationNotification return result with verificationResponse set to permissionDenied.
Option 3:
The user ignores the location request by taking no action, allowing the verification process timer to time-out. The SS responds with RELEASE COMPLETE.
Maximum duration of the test
5 minutes.
Expected Sequence
The test sequence is repeated for k = 1 … 3.
Step
Direction
Message
Comments
1
SS->MS
PAGING REQUEST TYPE I
2
MS -> SS
CHANNEL REQUEST
Establishment cause indicates “answer to paging”.
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS->SS
PAGING RESPONSE
Message is contained in SABM.
“mobile station classmark 2” includes settings for ES_IND.
5
MS->SS
CLASSMARK CHANGE
“mobile station classmark 2” includes settings for ES_IND.
“mobile station classmark 3” includes settings for Positioning. The setting for positioning specifies Positioning Method capability and Positioning Method Support. In the position method support (5 bit field), Bit 2 is set to 1 (MS-Based GPS)
6
SS -> MS
AUTHENTICATION REQUEST
7
MS -> SS
AUTHENTICATION RESPONSE
8
SS -> MS
CIPHERING MODE COMMAND
9
MS -> SS
CIPHERING MODE COMPLETE
10
SS
SS starts ciphering.
11
SS -> MS
REGISTER
Call Independent SS containing Facility IE LCS Location Notification Invoke set to notifyAndVerify-LocationAllowedIfNoResponse
12
SS
SS starts timer T(LCSN) set to 90% of MS LCS Notification timeout timer
13A
(k=1)
MS
The MS displays the location request and information about LCS Client. The user accepts location request before timer T(LCSN) expires.
14A
(k=1)
MS -> SS
RELEASE COMPLETE
Containing a LocationNotification return result with verificationResponse set to permissionGranted.
13B
(k=2)
MS
The MS displays the location request and information about LCS Client. The user rejects location request before timer T(LCSN) expires.
14B
(k=2)
MS -> SS
RELEASE COMPLETE
Containing a LocationNotification return result with verificationResponse set to permissionDenied.
13C
(k=3)
MS
The MS displays the location request and information about LCS Client. The user does not reply and waits for T(LCSN) to expire.
14C
(k=3)
SS->MS
RELEASE COMPLETE
SS terminates the dialogue after T(LCSN) expiry
15
SS -> MS
CHANNEL RELEASE
The main signalling link is released.
Specific Message Contents
PAGING RESPONSE (Step 4)
Information element
Value/remark
Protocol Discriminator
RR management
Ciphering Key Sequence number
- Key Sequence
Key sequence number previously allocated to MS, or "111" if no key is available
Mobile station Classmark 2
- ES IND
Shall indicate early autonomous sending of CLASSMARK CHANGE
Mobile Identity
- odd/even
Even
- Type of identity
TMSI
- Identity digits
TMSI previously allocated to MS
REGISTER (Step 11)
Information element
Value/remark
Protocol Discriminator
Call Independent SS message (1011)
Transaction identifier
Message type
REGISTER (0011 1011)
Facility
Invoke = lcs-LocationNotification
LocationNotificationArg
notificationType ->notifyAnd Verify- LocationAllowedIfNoResponse,
locationType -> current Location ,
lcsClientExternalID -> externalAddress
lcsClientName ->dataCodingScheme
nameString
RELEASE COMPLETE (Option k=1 Step14A)
Information element
Value/remark
Protocol Discriminator
Call Independent SS message (1011)
Transaction identifier
Message type
RELEASE COMPLETE (xx10 1010)
Facility
Return result = lcs-LocationNotification
LocationNotificationRes
verificationResponse -> permissionGranted
RELEASE COMPLETE (Option k=2 Step 14B)
Information element
Value/remark
Protocol Discriminator
Call Independent SS message (1011)
Transaction identifier
Message type
RELEASE COMPLETE (xx10 1010)
Facility
Return result = lcs-LocationNotification
LocationNotificationRes
verificationResponse -> permissionDenied
RELEASE COMPLETE (Option k=3, Step 14C)
Information element
Value/remark
Protocol Discriminator
Call Independent SS message (1011)
Transaction identifier
Message type
RELEASE COMPLETE (0010 1010)
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.2.2 MT-LR Privacy Options/Verification– Location Allowed If No Response for Mobiles Supporting MS-Assisted GPS
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.2.2.1 Conformance requirements
|
1. On receipt of a REGISTER message containing the LCS Notification Invoke component with notificationType set to notifyAndVerify-LocationAllowedIfNoResponse. The MS: a) notifies the user of the request, b) indicates the default is location allowed if no response is received within a predetermined period, and c) providing the opportunity to accept or deny the request if allowed by subscription or if barred by subscription.
2.
Option 1: The user accepts the location request. The MS shall terminate the dialogue by sending a RELEASE COMPLETE message containing a LocationNotification return result with verificationResponse set to permissionGranted.
Option 2: The user denies the location request.
The MS shall terminate the dialogue by sending a RELEASE COMPLETE message containing a LocationNotification return result with verificationResponse set to permissionDenied.
Option 3: The user takes no action and the verification process times-out.
The SS shall terminate the dialogue.
References
3GPP TS 03.71 sub clause 7.6.1.
3GPP TS 04.30 / 3GPP TS 24.030 Rel-6 sub clause 4.1.1.
3GPP TS 04.80 / 3GPP TS 24.080 sub clauses 2.4, 2.5, and 3.4.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.2.2.2 Test Purpose
|
To verify that the MS receives a REGISTER message, containing a LCS Location Notification Invoke component set to notifyAndVerify-LocationAllowedIfNoResponse, the MS displays information about the LCS client correctly and indicates that the default response is location allowed if no response is sent. Gives the user the option to accept or reject the request and sends a RELEASE COMPLETE message containing a LocationNotification return result with the verificationResponse set to permissionDenied or permissionGranted as appropriate.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.2.2.3 Method of Test
|
Initial Conditions
System Simulator (SS):
Serving Cell: default parameters
Mobile Station (MS):
The MS is in MM-state “idle, updated” with valid TMSI and CKSN.
Specific PICS statements
-
PIXIT statements
- MS LCS Notification timeout timer
Test Procedure
The MS is paged with a PAGING REQUEST TYPE 1 message. After sending the CIPHERING MODE COMPLETE message the MS receives an SS REGISTER message with a Facility IE containing a LCS Location Notification Invoke set to notifyAndVerify-LocationAllowedIfNoResponse. The LCS Client Name contained in the USSD text string of the lcs-LocationNotification shall be displayed with the option to accept or deny the request, if allowed by subscription or if barred by subscription . The MS also indicates that location will be allowed if a response is not received within a predetermined time.
Option 1:
The user then accepts the location request. The MS responds with a RELEASE COMPLETE message containing a LocationNotification return result with verificationResponse set to permissionGranted.
Option 2:
The user then denies the location request. The MS responds with a RELEASE COMPLETE message containing a LocationNotification return result with verificationResponse set to permissionDenied.
Option 3:
The user ignores the location request by taking no action, allowing the verification process timer to time-out. The SS responds with RELEASE COMPLETE.
Maximum duration of the test
5 minutes.
Expected Sequence
The test sequence is repeated for k = 1 … 3.
Step
Direction
Message
Comments
1
SS->MS
PAGING REQUEST TYPE I
2
MS -> SS
CHANNEL REQUEST
Establishment cause indicates “answer to paging”.
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS->SS
PAGING RESPONSE
Message is contained in SABM.
“mobile station classmark 2” includes settings for ES_IND.
5
MS->SS
CLASSMARK CHANGE
“mobile station classmark 2” includes settings for ES_IND.
“mobile station classmark 3” includes settings for Positioning. The setting for positioning specifies Positioning Method capability and Positioning Method Support. In the position method support (5 bit field), Bit 3 is set to 1 (MS-Assisted GPS)
6
SS -> MS
AUTHENTICATION REQUEST
7
MS -> SS
AUTHENTICATION RESPONSE
8
SS -> MS
CIPHERING MODE COMMAND
9
MS -> SS
CIPHERING MODE COMPLETE
10
SS
SS starts ciphering.
11
SS -> MS
REGISTER
Call Independent SS containing Facility IE LCS Location Notification Invoke set to notifyAndVerify-LocationAllowedIfNoResponse
12
SS
SS starts timer T(LCSN) set to 90% of MS LCS Notification timeout timer
13A
(k=1)
MS
The MS displays the location request and information about LCS Client. The user accepts location request before timer T(LCSN) expires.
14A
(k=1)
MS -> SS
RELEASE COMPLETE
Containing a LocationNotification return result with verificationResponse set to permissionGranted.
13B
(k=2)
MS
The MS displays the location request and information about LCS Client. The user rejects location request before timer T(LCSN) expires.
14B
(k=2)
MS -> SS
RELEASE COMPLETE
Containing a LocationNotification return result with verificationResponse set to permissionDenied.
13C
(k=3)
MS
The MS displays the location request and information about LCS Client. The user does not reply and waits for T(LCSN) to expire.
14C
(k=3)
SS->MS
RELEASE COMPLETE
SS terminates the dialogue after T(LCSN) expiry
15
SS -> MS
CHANNEL RELEASE
The main signalling link is released.
Specific Message Contents
PAGING RESPONSE (Step 4)
Information element
Value/remark
Protocol Discriminator
RR management
Ciphering Key Sequence number
- Key Sequence
Key sequence number previously allocated to MS, or "111" if no key is available
Mobile station Classmark 2
- ES IND
Shall indicate early autonomous sending of CLASSMARK CHANGE
Mobile Identity
- odd/even
Even
- Type of identity
TMSI
- Identity digits
TMSI previously allocated to MS
REGISTER (Step 11)
Information element
Value/remark
Protocol Discriminator
Call Independent SS message (1011)
Transaction identifier
Message type
REGISTER (0011 1011)
Facility
Invoke = lcs-LocationNotification
LocationNotificationArg
notificationType ->notifyAnd Verify- LocationAllowedIfNoResponse,
locationType -> current Location,
lcsClientExternalID -> externalAddress
lcsClientName ->dataCodingScheme
nameString
RELEASE COMPLETE (Option k=1 Step14A)
Information element
Value/remark
Protocol Discriminator
Call Independent SS message (1011)
Transaction identifier
Message type
RELEASE COMPLETE (xx10 1010)
Facility
Return result = lcs-LocationNotification
LocationNotificationRes
verificationResponse -> permissionGranted
RELEASE COMPLETE (Option k=2 Step14B)
Information element
Value/remark
Protocol Discriminator
Call Independent SS message (1011)
Transaction identifier
Message type
RELEASE COMPLETE (xx10 1010)
Facility
Return result = lcs-LocationNotification
LocationNotificationRes
verificationResponse -> permissionDenied
RELEASE COMPLETE (Option k=3, Step 14C):
Information element
Value/remark
Protocol Discriminator
Call Independent SS message (1011)
Transaction identifier
Message type
RELEASE COMPLETE (0010 1010)
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.3 MT-LR Privacy Options/Verification – Location Not Allowed If No Response
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.3.1 MT-LR Privacy Options/Verification– Location Not Allowed If No Response for Mobiles Supporting MS-Based GPS
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.3.1.1 Conformance requirements
|
1. On receipt of a REGISTER message containing the LCS Notification Invoke component with notificationType set to notifyAndVerify-LocationNotAllowedIfNoResponse, the MS: a) notifies the user of the request, b) indicates the default is location not allowed if no response is received within a predetermined period, and c) providing the opportunity to accept or deny the request if allowed by subscription or if barred by subscription.
2.
Option 1: The user accepts the location request. The MS shall terminate the dialogue by sending a RELEASE COMPLETE message containing a LocationNotification return result with verificationResponse set to permissionGranted.
Option 2: The user denies the location request.
The MS shall terminate the dialogue by sending a RELEASE COMPLETE message containing a LocationNotification return result with verificationResponse set to permissionDenied.
Option 3: The user takes no action and the verification process times-out.
The SS shall terminate the dialogue.
References
3GPP TS 03.71 sub clause 7.6.1.
3GPP TS 04.30 / 3GPP TS 24.030 Rel-6 sub clause 4.1.1.
3GPP TS 04.80 / 3GPP TS 24.080 sub clauses 2.4, 2.5, and 3.4.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.3.1.2 Test Purpose
|
To verify that if the MS receives a REGISTER message, containing a LCS Location Notification Invoke component set to notifyAndVerify-LocationNotAllowedIfNoResponse, then the MS displays information about the LCS client correctly and indicates that the default response is location not allowed if no response is sent. Gives the user the option to accept or reject the request and sends a RELEASE COMPLETE message containing a LocationNotification return result with the verificationResponse set to permissionDenied or permissionGranted as appropriate.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.3.1.3 Method of Test
|
Initial Conditions
System Simulator (SS):
Serving Cell: default parameters
Mobile Station (MS):
The MS is in MM-state “idle, updated” with valid TMSI and CKSN.
Specific PICS statements
-
PIXIT statements
- MS LCS Notification timeout timer
Test Procedure
The MS is paged with a PAGING REQUEST TYPE 1 message. After sending the CIPHERING MODE COMPLETE message the MS receives an SS REGISTER message with a Facility IE containing a LCS Location Notification Invoke set to notifyAndVerify-LocationNotAllowedIfNoResponse. The LCS Client Name contained in the USSD text string of the lcs-LocationNotification shall be displayed with the option to accept or deny the request, if allowed by subscription or if barred by subscription respectively. The MS also indicates that location will be allowed if a response is not received within a predetermined time.
Option 1:
The user then accepts the location request. The MS responds with a RELEASE COMPLETE message containing a LocationNotification return result with verificationResponse set to permissionGranted.
Option 2:
The user then denies the location request. The MS responds with a RELEASE COMPLETE message containing a LocationNotification return result with verificationResponse set to permissionDenied.
Option 3:
The user ignores the location request by taking no action, allowing the verification process timer to time-out. The SS responds with RELEASE COMPLETE.
Maximum duration of the test
5 minutes.
Expected Sequence
The test sequence is repeated for k = 1 … 3.
Step
Direction
Message
Comments
1
SS->MS
PAGING REQUEST TYPE I
2
MS -> SS
CHANNEL REQUEST
Establishment cause indicates “answer to paging”.
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS->SS
PAGING RESPONSE
Message is contained in SABM.
“mobile station classmark 2” includes settings for ES_IND.
5
MS->SS
CLASSMARK CHANGE
“mobile station classmark 2” includes settings for ES_IND.
“mobile station classmark 3” includes settings for Positioning. The setting for positioning specifies Positioning Method capability and Positioning Method Support. In the position method support (5 bit field), Bit 2 is set to 1 (MS-Based GPS)
6
SS -> MS
AUTHENTICATION REQUEST
7
MS -> SS
AUTHENTICATION RESPONSE
8
SS -> MS
CIPHERING MODE COMMAND
9
MS -> SS
CIPHERING MODE COMPLETE
10
SS
SS starts ciphering.
11
SS -> MS
REGISTER
Call Independent SS containing Facility IE LCS Location Notification Invoke set to notifyAndVerify-LocationNotAllowedIfNoResponse
12
SS
SS starts timer T(LCSN) set to 90% of MS LCS Notification timeout timer
13A
(k=1)
MS
The MS displays the location request and information about LCS Client. The user accepts location request before timer T(LCSN) expires.
14A
(k=1)
MS -> SS
RELEASE COMPLETE
Containing a LocationNotification return result with verificationResponse set to permissionGranted.
13B
(k=2)
MS
The MS displays the location request and information about LCS Client. The user rejects location request before timer T(LCSN) expires.
14B
(k=2)
MS -> SS
RELEASE COMPLETE
Containing a LocationNotification return result with verificationResponse set to permissionDenied.
13C
(k=3)
MS
The MS displays the location request and information about LCS Client. The user does not reply and waits for T(LCSN) to expire.
14C
(k=3)
SS->MS
RELEASE COMPLETE
SS terminates the dialogue after T(LCSN) expiry
15
SS -> MS
CHANNEL RELEASE
The main signalling link is released.
Specific Message Contents
PAGING RESPONSE (Step 4)
Information element
Value/remark
Protocol Discriminator
RR management
Ciphering Key Sequence number
- Key Sequence
Key sequence number previously allocated to MS, or "111" if no key is available
Mobile station Classmark 2
- ES IND
Shall indicate early autonomous sending of CLASSMARK CHANGE
Mobile Identity
- odd/even
Even
- Type of identity
TMSI
- Identity digits
TMSI previously allocated to MS
REGISTER (Step 11)
Information element
Value/remark
Protocol Discriminator
Call Independent SS message (1011)
Transaction identifier
Message type
REGISTER (0011 1011)
Facility
Invoke = lcs-LocationNotification
LocationNotificationArg
notificationType ->notifyAnd Verify- LocationNotAllowedIfNoResponse,
locationType -> current Location,
lcsClientExternalID -> externalAddress
lcsClientName ->dataCodingScheme
nameString
RELEASE COMPLETE (Option k=1 Step14A)
Information element
Value/remark
Protocol Discriminator
Call Independent SS message (1011)
Transaction identifier
Message type
RELEASE COMPLETE (xx10 1010)
Facility
Return result = lcs-LocationNotification
LocationNotificationRes
verificationResponse -> permissionGranted
RELEASE COMPLETE (Option k=2 Step14B)
Information element
Value/remark
Protocol Discriminator
Call Independent SS message (1011)
Transaction identifier
Message type
RELEASE COMPLETE (xx10 1010)
Facility
Return result = lcs-LocationNotification
LocationNotificationRes
verificationResponse -> permissionDenied
RELEASE COMPLETE (Option k=3, Step 14C)
Information element
Value/remark
Protocol Discriminator
Call Independent SS message (1011)
Transaction identifier
Message type
RELEASE COMPLETE (0010 1010)
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.3.2 MT-LR Privacy Options/Verification– Location Not Allowed If No Response for mobiles supporting MS-Assisted GPS
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.3.2.1 Conformance requirements
|
1. On receipt of a REGISTER message containing the LCS Notification Invoke component with notificationType set to notifyAndVerify-LocationNotAllowedIfNoResponse, the MS: a) notifies the user of the request, b) indicates the default is location not allowed if no response is received within a predetermined period, and c) providing the opportunity to accept or deny the request if allowed by subscription or if barred by subscription respectively.
2.
Option 1: The user accepts the location request. The MS shall terminate the dialogue by sending a RELEASE COMPLETE message containing a LocationNotification return result with verificationResponse set to permissionGranted.
Option 2: The user denies the location request.
The MS shall terminate the dialogue by sending a RELEASE COMPLETE message containing a LocationNotification return result with verificationResponse set to permissionDenied.
Option 3: The user takes no action and the verification process times-out.
The SS shall terminate the dialogue.
References
3GPP TS 03.71 sub clause 7.6.1.
3GPP TS 04.30 / 3GPP TS 24.030 Rel-6 sub clause 4.1.1.
3GPP TS 04.80 / 3GPP TS 24.080 sub clauses 2.4, 2.5, and 3.4.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.3.2.2 Test Purpose
|
To verify that the MS receives a REGISTER message, containing a LCS Location Notification Invoke component set to notifyAndVerify-LocationNotAllowedIfNoResponse, the MS displays information about the LCS client correctly and indicates that the default response is location not allowed if no response is sent. Gives the user the option to accept or reject the request and sends a RELEASE COMPLETE message containing a LocationNotification return result with the verificationResponse set to permissionDenied or permissionGranted as appropriate.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.3.2.3 Method of Test
|
Initial Conditions
System Simulator (SS):
Serving Cell: default parameters
Mobile Station (MS):
The MS is in MM-state “idle, updated” with valid TMSI and CKSN.
Specific PICS statements
-
PIXIT statements
- MS LCS Notification timeout timer
Test Procedure
The MS is paged with a PAGING REQUEST TYPE 1 message. After sending the CIPHERING MODE COMPLETE message the MS receives an SS REGISTER message with a Facility IE containing a LCS Location Notification Invoke set to notifyAndVerify-LocationNotAllowedIfNoResponse. The LCS Client Name contained in the USSD text string of the lcs-LocationNotification shall be displayed with the option to accept or deny the request, if allowed by subscription or if barred by subscription respectively. The MS also indicates that location will not be allowed if a response is not received within a predetermined time.
Option 1:
The user then accepts the location request. The MS responds with a RELEASE COMPLETE message containing a LocationNotification return result with verificationResponse set to permissionGranted.
Option 2:
The user then denies the location request. The MS responds with a RELEASE COMPLETE message containing a LocationNotification return result with verificationResponse set to permissionDenied.
Option 3:
The user ignores the location request by taking no action, allowing the verification process timer to time-out. The SS responds with RELEASE COMPLETE.
Maximum duration of the test
5 minutes.
Expected Sequence
The test sequence is repeated for k = 1 … 3.
Step
Direction
Message
Comments
1
SS->MS
PAGING REQUEST TYPE I
2
MS -> SS
CHANNEL REQUEST
Establishment cause indicates “answer to paging”.
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS->SS
PAGING RESPONSE
Message is contained in SABM.
“mobile station classmark 2” includes settings for ES_IND.
5
MS->SS
CLASSMARK CHANGE
“mobile station classmark 2” includes settings for ES_IND.
“mobile station classmark 3” includes settings for Positioning. The setting for positioning specifies Positioning Method capability and Positioning Method Support. In the position method support (5 bit field), Bit 3 is set to 1 (MS-Assisted GPS)
6
SS -> MS
AUTHENTICATION REQUEST
7
MS -> SS
AUTHENTICATION RESPONSE
8
SS -> MS
CIPHERING MODE COMMAND
9
MS -> SS
CIPHERING MODE COMPLETE
10
SS
SS starts ciphering.
11
SS -> MS
REGISTER
Call Independent SS containing Facility IE LCS Location Notification Invoke set to notifyAndVerify-LocationNotAllowedIfNoResponse
12
SS
SS starts timer T(LCSN) set to 90% of MS LCS Notification timeout timer
13A
(k=1)
MS
The MS displays the location request and information about LCS Client. The user accepts location request before timer T(LCSN) expires.
14A (k=1)
SS -> MS
RELEASE COMPLETE
Containing a LocationNotification return result with verificationResponse set to permissionGranted.
13B
(k=2)
MS
The MS displays the location request and information about LCS Client. The user rejects location request before timer T(LCSN) expires.
14B
(k=2)
MS -> SS
RELEASE COMPLETE
Containing a LocationNotification return result with verificationResponse set to permissionDenied.
13C
(k=3)
MS
The MS displays the location request and information about LCS Client. The user does not reply and waits for T(LCSN) to expire.
14C
(k=3)
SS->MS
RELEASE COMPLETE
SS terminates the dialogue after T(LCSN) expiry
15
SS -> MS
CHANNEL RELEASE
The main signalling link is released.
Specific Message Contents
PAGING RESPONSE (Step 4)
Information element
Value/remark
Protocol Discriminator
RR management
Ciphering Key Sequence number
- Key Sequence
Key sequence number previously allocated to MS, or "111" if no key is available
Mobile station Classmark 2
- ES IND
Shall indicate early autonomous sending of CLASSMARK CHANGE
Mobile Identity
- odd/even
Even
- Type of identity
TMSI
- Identity digits
TMSI previously allocated to MS
REGISTER (Step 11)
Information element
Value/remark
Protocol Discriminator
Call Independent SS message (1011)
Transaction identifier
Message type
REGISTER (0011 1011)
Facility
Invoke = lcs-LocationNotification
LocationNotificationArg
notificationType ->notifyAnd Verify- LocationNotAllowedIfNoResponse,
locationType -> current Location ,
lcsClientExternalID -> externalAddress
lcsClientName ->dataCodingScheme
nameString
RELEASE COMPLETE (Option k=1 Step 14A)
Information element
Value/remark
Protocol Discriminator
Call Independent SS message (1011)
Transaction identifier
Message type
RELEASE COMPLETE (xx10 1010)
Facility
Return result = lcs-LocationNotification
LocationNotificationRes
verificationResponse -> permissionGranted
RELEASE COMPLETE (Option k=2 Step 14B)
Information element
Value/remark
Protocol Discriminator
Call Independent SS message (1011)
Transaction identifier
Message type
RELEASE COMPLETE (xx10 1010)
Facility
Return result = lcs-LocationNotification
LocationNotificationRes
verificationResponse -> permissionDenied
RELEASE COMPLETE (Option k=3, Step 14C)
Information element
Value/remark
Protocol Discriminator
Call Independent SS message (1011)
Transaction identifier
Message type
RELEASE COMPLETE (0010 1010)
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4 MT-LR / RRLP Error Handling for MS-Based A-GPS
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4.1 RRLP Protocol Error
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4.1.1 Conformance requirement:
|
The MS sends an RRLP PROTOCOL ERROR message to the network if there is a problem that prevents the MS to receive a complete and understandable RRLP MEASURE POSITION REQUEST component.
Test References
3GPP TS04.31 sub clause 2.2, 2.5
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4.1.2 Test Purpose
|
To verify that the MS sends the correct positioning capability via controled early classmark sending. The MS shall send a RRLP PROTOCOL ERROR message to SS with specific error code if RRLP MEASURE POSITION REQUEST is incomplete. On receipt of second RRLP MEASURE POSITION REQUEST from SS to start the measurement, MS shall send back RRLP MEASURE POSITION RESPONSE to SS after finishing the measurement.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4.1.3 Method of Test
|
Initial Conditions:
System Simulator:
Serving Cell: default parameters.
Satellite signals: default conditions.
Mobile Station:
The MS is MM-state "idle, updated" with valid TMSI and CKSN.
Specific PICS statements
- TSPC_MS_RRLP_RELEASE
PIXIT statements
-
Test Procedure:
The MS is paged with a PAGING REQUEST TYPE 1 message. The MS performs control early classmark sending to provide LCS positioning method capability. After sending the CIPHERING MODE COMPLETE message the MS receives RR APPLICATION INFORMATION messages containing RRLP Assistance Data messages.
The SS then sends an RRLP MEASURE POSITION REQUEST message with missing information element.
The MS shall send RRLP PROTOCOL ERROR as it fails to decode RRLP MEASURE POSITION REQUEST. The SS repeats RRLP MEASURE POSITION REQUEST with correct message contents.
Option 1: The MS then performs positioning measurements, and responds with an RR APPLICATION INFORMATION message containing an RRLP Measure Position Response.
Option 2: The MS may request additional assistance data by sending an RRLP Measure Position Response message containing a location error with IE LocErrorReason set to gpsAssDataMissing. If the MS requests additional assistance data that is available in the SS, then the SS provides the requested assistance data in zero, one or more RRLP Assistance Data delivery messages followed by an RRLP Measure Position Request message which may include further assistance data. If the MS requests additional assistance data and the entire requested assistance data is not available in the SS, then the SS repeats the RRLP Measure Position Request message without assistance data. The MS then performs positioning measurements, and responds with an RR APPLICATION INFORMATION message containing an RRLP Measure Position Response.
Maximum duration of the test:
5 minutes.
Expected Sequence
Step
Direction
Message
Comments
1
SS->MS
PAGING REQUEST TYPE I
2
MS -> SS
CHANNEL REQUEST
Establishment cause indicates “answer to paging”.
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS->SS
PAGING RESPONSE
Message is contained in SABM.
“mobile station classmark 2” includes settings for ES_IND.
5
MS->SS
CLASSMARK CHANGE
“mobile station classmark 2” includes settings for ES_IND.
“mobile station classmark 3” includes settings for Positioning. The setting for positioning specifies Positioning Method capability and Positioning Method Support. In the position method support (5 bit field), Bit 2 is set to 1 (MS-Based GPS)
6
SS -> MS
AUTHENTICATION REQUEST
7
MS -> SS
AUTHENTICATION RESPONSE
8
SS -> MS
CIPHERING MODE COMMAND
9
MS -> SS
CIPHERING MODE COMPLETE
10
SS
SS starts ciphering.
11
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data
12
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck
13
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data
14
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck
15
SS-> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request 1
(with missing final octet)
16
MS -> SS
RR APPLICATION INFORMATION
RRLP PROTOCOL ERROR
17
SS -> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request 2
18
MS -> SS
RR APPLICATION INFORMATION
RRLP Measure Position Response:
locationInfo (Option 1)
or
locationError with gpsAssDataMissing and additionalAssistanceData (Option 2)
18a
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data.
If the MS requested additional assistance data in step 18 that is available in the SS, then SS provides the requested data in zero, one or more RRLP Assistance Data delivery messages.
18b
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck.
If the SS sent additional assistance data in step 18a, the MS acknowledges the received assistance data.
18c
SS-> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request.
If the MS requested additional assistance data in step 18 that is available in the SS, this message may include further assistance data.
18d
MS-> SS
RR APPLICATION INFORMATION
RRLP Measure Position Response.
If the MS requested additional assistance data in step 18, this message contains locationInfo.
19
SS -> MS
CHANNEL RELEASE
The main signalling link is released
Specific Message Contents
RR_APPLICATION_INFORMATION
Information element
Value/remark
Protocol Discriminator
RR Management Protocol (0110)
Skip Indicator
Message Type
Application Information Message type
APDU ID
APDU ID -> RRLP => 0000
APDU Flags
Bit1=0 -> Last or only segment
Bit2=0 -> First or only segment
Bit3=0 -> Command or Final Response
Bit4=spare
APDU Data
2-N Byte ASN.1 Coded
Step 15, 17 and 18c: RRLP Measure Position Request
Step 18 and 18d: RRLP Measure Position Response
Step 11, 13, 18a: RRLP Assistance Data
Step 12, 14, 18b: RRLP Assistance Data Ack
Step 16: RRLP Protocol Error
RRLP Assistance Data (Step 11):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
navigationModel
SEQUENCE
PRNs 4,6,9. See TS 51.010-7 sub clause 5.1.5
moreAssDataToBeSent
ENUMERATED
1
extended-reference
SEQUENCE
Rel 5 and later
RRLP Assistance Data Ack (Steps 12, 14, 18b):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1 or 3 (Option 2, Step 18b)
component
CHOICE
assistanceDataAck
RRLP Assistance Data (Step 13):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
navigationModel
SEQUENCE
PRNs 10,13,22. See TS 51.010-7 sub clause 5.1.5
ionosphericModel
SEQUENCE
See TS 51.010-7 sub clause 5.1.6
moreAssDataToBeSent
ENUMERATED
R98, R99, Rel 4: 0.
Rel 5 and later: 1
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Request 1 (Step 15):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
msrPositionReq
methodType
CHOICE
msBased
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
5
accuracy*
Integer (0-127)
127
useMultipleSets*
ENUMERATED
oneSet
Note*: Final octet of data shall be disgarded. E.g if encoded data is [0x20, 0x01, 0xFE, 0xD8] this shall be transmitted as [0x20, 0x01, 0xFE].
RRLP Protocol Error (Step 16):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
0 or 1
component
CHOICE
protocolError
errorCause
ENUMERATED
missingIEorComponentElement, messageTooShort or
Incorrect Data
RRLP Measure Position Request 2 (Step 17):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
msrPositionReq
methodType
CHOICE
msBased
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
5
accuracy
Integer (0-127)
127
useMultipleSets
ENUMERATED
oneSet
gps-AssistData
SEQUENCE
referenceTime
SEQUENCE
See TS 51.010-7 sub clause 5.1.3
refLocation
SEQUENCE
See TS 51.010-7 sub clause 5.1.4
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Response (Step 18 (Option 1) or 18d (Option 2)):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2 or 3 (Option 2, Step 18d)
component
CHOICE
msrPositionRsp
(A valid response will contain LocationInfo otherwise LocationError will be returned)
locationInfo
SEQUENCE
Any value is acceptable.
locationError
SEQUENCE
Any error value is acceptable except gpsAssDataMissing.
extended-reference
SEQUENCE
Rel5 and later
The value returned by the MS shall equal the value received from the SS in the earlier Measure Position Request
RRLP Measure Position Response (Step 18 (Option 2)):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
msrPositionRsp
locationError
SEQUENCE
locErrorReason
ENUMERATED
gpsAssDataMissing
additionalAssistanceData
SEQUENCE
gpsAssistanceData
OCTET STRING
Indicates missing assistance data elements
extended-reference
SEQUENCE
Rel5 and later
The value returned by the MS shall equal the value received from the SS in the earlier Measure Position Request
RRLP Assistance Data (Step 18a):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
3
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
If the MS requested further assistance data in Step 18 (Option 2) that is available in the SS, SS shall send zero, one or more RRLP Assistance Data messages containing the requested assistance data from TS 51.010-7 sub clauses 5.1.3 to 5.1.8. Each message shall contain a maximum of 242 octets.
moreAssDataToBeSent
ENUMERATED
R98, R99, Rel 4: 1 or 0.
If SS sends more than one RRLP assistance data delivery message the moreAssDataToBeSent field shall be set accordingly.
Rel 5 and later: 1, except in the case of the final Assistance Data message when the following Measure Position Request contains no additional Assistance Data (in which case: 0)
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Request (Step 18c):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
3
component
CHOICE
msrPositionReq
methodType
CHOICE
msBased
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
5
accuracy
Integer (0-127)
127
useMultipleSets
ENUMERATED
oneSet
gps-AssistData
SEQUENCE
May contain further assistance data from TS 51.010-7 as requested by the MS in step 18 (Option 2).
extended-reference
SEQUENCE
Rel 5 and later
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4.2 RRLP Location Error – Requested Method Not Supported
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4.2.1 Conformance requirement:
|
The MS sends an RRLP MEASURE POSITION RESPONSE message to the network containing a Location Error component with an error indication if the measurement is not possible.
Test References
3GPP TS04.31 sub clause 2.2, A.3.2.6
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4.2.2 Test Purpose
|
To verify that the MS sends the correct positioning capability via controled early classmark sending. The MS shall send a RRLP MEASURE POSITION RESPONSE message with Location Error component if the MS does not support the requested method. On receipt of second RRLP MEASURE POSITION REQUEST from SS to start the measurement, the MS shall send back RRLP MEASURE POSITION RESPONSE to SS after finishing the measurement.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4.2.3 Method of Test
|
Initial Conditions:
System Simulator:
Serving Cell: default parameters.
Satellite signals: default conditions.
Mobile Station:
The MS is MM-state "idle, updated" with valid TMSI and CKSN.
Specific PICS statements
- TSPC_MS_RRLP_RELEASE
PIXIT statements
-
Test Procedure:
The MS is paged with a PAGING REQUEST TYPE 1 message. The MS performs control early classmark sending to provide LCS positioning method capability.
The SS sends an RRLP MEASURE POSITION REQUEST message with a method type not supported by the mobile (type not supported to be E-OTD).
The MS sends RRLP MEASURE POSITION RESPONSE to SS containing a Location Error component (Requested Method not Supported) as the requested method is not supported.
The MS receives RR APPLICATION INFORMATION messages containing RRLP Assistance Data messages followed by a new RRLP MEASURE POSITION REQUEST with correct message contents including assistance data.
Option 1: The MS then performs positioning measurements, and responds with an RR APPLICATION INFORMATION message containing an RRLP Measure Position Response.
Option 2: The MS may request additional assistance data by sending an RRLP Measure Position Response message containing a location error with IE LocErrorReason set to gpsAssDataMissing. If the MS requests additional assistance data that is available in the SS, then the SS provides the requested assistance data in zero, one or more RRLP Assistance Data delivery messages followed by an RRLP Measure Position Request message which may include further assistance data. If the MS requests additional assistance data and the entire requested assistance data is not available in the SS, then the SS repeats the RRLP Measure Position Request message without assistance data. The MS then performs positioning measurements, and responds with an RR APPLICATION INFORMATION message containing an RRLP Measure Position Response.
Maximum duration of the test:
5 minutes.
Expected Sequence
Step
Direction
Message
Comments
1
SS->MS
PAGING REQUEST TYPE I
2
MS -> SS
CHANNEL REQUEST
Establishment cause indicates “answer to paging”.
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS->SS
PAGING RESPONSE
Message is contained in SABM.
“mobile station classmark 2” includes settings for ES_IND.
5
MS->SS
CLASSMARK CHANGE
“mobile station classmark 2” includes settings for ES_IND.
“mobile station classmark 3” includes settings for Positioning. The setting for positioning specifies Positioning Method capability and Positioning Method Support. In the position method support (5 bit field), Bit 2 is set to 1 (MS-Based GPS)
6
SS -> MS
AUTHENTICATION REQUEST
7
MS -> SS
AUTHENTICATION RESPONSE
8
SS -> MS
CIPHERING MODE COMMAND
9
MS -> SS
CIPHERING MODE COMPLETE
10
SS
SS starts ciphering.
11
SS-> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request 1
(Request method not supported)
12
MS -> SS
RR APPLICATION INFORMATION
RRLP Measure Position Response 1
(location error)
13
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data
14
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck
15
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data
16
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck
17
SS -> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request 2
18
MS -> SS
RR APPLICATION INFORMATION
RRLP Measure Position Response 2:
locationInfo (Option 1)
or
locationError with gpsAssDataMissing and additionalAssistanceData (Option 2)
18a
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data.
If the MS requested additional assistance data in step 18 that is available in the SS, then SS provides the requested data in zero, one or more RRLP Assistance Data delivery messages.
18b
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck.
If the SS sent additional assistance data in step 18a, the MS acknowledges the received assistance data.
18c
SS-> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request.
If the MS requested additional assistance data in step 18 that is available in the SS, this message may include further assistance data.
18d
MS-> SS
RR APPLICATION INFORMATION
RRLP Measure Position Response.
If the MS requested additional assistance data in step 18, this message contains locationInfo.
19
SS -> MS
CHANNEL RELEASE
The main signalling link is released
Specific Message Contents
RR_APPLICATION_INFORMATION
Information element
Value/remark
Protocol Discriminator
RR Management Protocol (0110)
Skip Indicator
Message Type
Application Information Message type
APDU ID
APDU ID -> RRLP => 0000
APDU Flags
Bit1=0 -> Last or only segment
Bit2=0 -> First or only segment
Bit3=0 -> Command or Final Response
Bit4=spare
APDU Data
2-N Byte ASN.1 Coded
Step 11, 17 and 18c: RRLP Measure Position Request
Step 12, 18 and 18d: RRLP Measure Position Response
Step 13, 15, 18a: RRLP Assistance Data
Step 14, 16, 18b: RRLP Assistance Data Ack
RRLP Measure Position Request 1 (Step 11):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer 0 to 7
1
component
CHOICE
msrPositionReq
methodType
CHOICE
msAssisted
positionMethod
ENUMERATED
eotd
measureResponseTime
Integer 0 to 7
7
useMultipleSets
ENUMERATED
oneSet
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Response 1 (Step 12):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
msrPositionRes
locationError
SEQUENCE
locErrorReason
ENUMERATED
methodNotSupported
extended-reference
SEQUENCE
Rel5 and later
The value returned by the MS shall equal the value received from the SS in the earlier Measure Position Request
RRLP Assistance Data (Step 13):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
navigationModel
SEQUENCE
PRNs 4,6,9. See TS 51.010-7 sub clause 5.1.5
moreAssDataToBeSent
ENUMERATED
1
extended-reference
SEQUENCE
Rel 5 and later
RRLP Assistance Data Ack (Steps 14, 16, 18b):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2 or 3 (Option 2, Step 18b)
component
CHOICE
assistanceDataAck
RRLP Assistance Data (Step 15):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
navigationModel
SEQUENCE
PRNs 10,13,22. See TS 51.010-7 sub clause 5.1.5
ionosphericModel
SEQUENCE
See TS 51.010-7 sub clause 5.1.6
moreAssDataToBeSent
ENUMERATED
R98, R99, Rel 4: 0.
Rel 5 and later: 1
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Request 2 (Step 17):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
msrPositionReq
methodType
CHOICE
msBased
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
5
accuracy
Integer (0-127)
127
useMultipleSets
ENUMERATED
oneSet
gps-AssistData
SEQUENCE
referenceTime
SEQUENCE
See TS 51.010-7 sub clause 5.1.3
refLocation
SEQUENCE
See TS 51.010-7 sub clause 5.1.4
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Response (Step 18 (Option 1) or 18d (Option 2)):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2 or 3 (Option 2, Step 18d)
component
CHOICE
msrPositionRsp
(A valid response will contain LocationInfo otherwise LocationError will be returned)
locationInfo
SEQUENCE
Any value is acceptable.
locationError
SEQUENCE
Any error value is acceptable except gpsAssDataMissing.
extended-reference
SEQUENCE
Rel5 and later
The value returned by the MS shall equal the value received from the SS in the earlier Measure Position Request
RRLP Measure Position Response (Step 18 (Option 2)):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
msrPositionRsp
locationError
SEQUENCE
locErrorReason
ENUMERATED
gpsAssDataMissing
additionalAssistanceData
SEQUENCE
gpsAssistanceData
OCTET STRING
Indicates missing assistance data elements
extended-reference
SEQUENCE
Rel5 and later
The value returned by the MS shall equal the value received from the SS in the earlier Measure Position Request
RRLP Assistance Data (Step 18a):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
3
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
If the MS requested further assistance data in Step 18 (Option 2) that is available in the SS, SS shall send zero, one or more RRLP Assistance Data messages containing the requested assistance data from TS 51.010-7 sub clauses 5.1.3 to 5.1.8. Each message shall contain a maximum of 242 octets.
moreAssDataToBeSent
ENUMERATED
R98, R99, Rel 4: 1 or 0.
If SS sends more than one RRLP assistance data delivery message the moreAssDataToBeSent field shall be set accordingly.
Rel 5 and later: 1, except in the case of the final Assistance Data message when the following Measure Position Request contains no additional Assistance Data (in which case: 0)
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Request (Step 18c):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
3
component
CHOICE
msrPositionReq
methodType
CHOICE
msBased
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
5
accuracy
Integer (0-127)
127
useMultipleSets
ENUMERATED
oneSet
gps-AssistData
SEQUENCE
May contain further assistance data from TS 51.010-7 as requested by the MS in step 18 (Option 2).
extended-reference
SEQUENCE
Rel 5 and later
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4.3 RRLP Location Error – GPS Assistance Data Missing
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4.3.1 Conformance requirement
|
The MS sends an RRLP MEASURE POSITION RESPONSE message to the network containing a Location Error component with an error indication if the measurement is not possible.
Test References
3GPP TS04.31 sub clause 2.2, A.3.2.6
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4.3.2 Test Purpose
|
To verify that the MS sends the correct positioning capability via controled early classmark sending. The MS shall send a RRLP MEASURE POSITION RESPONSE message with Location Error component if some GPS assistance data are missing. On receipt of second RRLP MEASURE POSITION REQUEST (with all necessary GPS assistance data to obtain a location estimate included) from SS to start the measurement, the MS shall send back RRLP MEASURE POSITION RESPONSE to SS after finishing the measurement.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4.3.3 Method of Test
|
Initial Conditions
System Simulator:
Serving Cell: default parameters.
Satellite signals: default conditions.
Mobile Station:
The MS is MM-state "idle, updated" with valid TMSI and CKSN.
Specific PICS statements
- TSPC_MS_RRLP_RELEASE
PIXIT statements
-
Test Procedure
The A-GPS assistance data stored in the MS is reset.
The MS is paged with a PAGING REQUEST TYPE 1 message. The MS performs control early classmark sending to provide LCS positioning method capability. After sending the CIPHERING MODE COMPLETE message the MS receives an RRLP MEASURE POSITION REQUEST message with Reference Time GPS assistance data.
The MS requests additional assistance data by sending an RRLP MEASURE POSITION RESPONSE message to SS containing a Location Error component with IE LocErrorReason set to gpsLocCalAssDataMissing or gpsAssDataMissing.
The SS provides the requested assistance data that is available in the SS in zero, one or more RRLP Assistance Data delivery messages followed by an RRLP Measure Position Request message which may include further assistance data.
The MS then performs positioning measurements, and responds with an RR APPLICATION INFORMATION message containing an RRLP Measure Position Response.
Maximum duration of the test
5 minutes.
Expected Sequence
Step
Direction
Message
Comments
1
MS
Reset all stored A-GPS assistance data
2
SS->MS
PAGING REQUEST TYPE I
3
MS -> SS
CHANNEL REQUEST
Establishment cause indicates “answer to paging”.
4
SS -> MS
IMMEDIATE ASSIGNMENT
5
MS->SS
PAGING RESPONSE
Message is contained in SABM.
“mobile station classmark 2” includes settings for ES_IND.
6
MS->SS
CLASSMARK CHANGE
“mobile station classmark 2” includes settings for ES_IND.
“mobile station classmark 3” includes settings for Positioning. The setting for positioning specifies Positioning Method capability and Positioning Method Support. In the position method support (5 bit field), Bit 2 is set to 1 (MS-Based GPS)
7
SS -> MS
AUTHENTICATION REQUEST
8
MS -> SS
AUTHENTICATION RESPONSE
9
SS -> MS
CIPHERING MODE COMMAND
10
MS -> SS
CIPHERING MODE COMPLETE
11
SS
SS starts ciphering.
12
SS -> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request 1
(with Reference Time GPS assistance data)
13
MS -> SS
RR APPLICATION INFORMATION
RRLP Measure Position Response 1
(location error with gpsLocCalAssDataMissing or gpsAssDataMissing)
14
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data.
The SS provides the requested data from step 13 that is available in the SS in zero, one or more RRLP Assistance Data delivery messages.
15
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck.
If the SS sent additional assistance data in step 14, the MS acknowledges the received assistance data.
16
SS-> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request 2.
This message may include further assistance data.
17
MS-> SS
RR APPLICATION INFORMATION
RRLP Measure Position Response 2.
(LocationInfo)
18
SS -> MS
CHANNEL RELEASE
The main signalling link is released
Specific Message Contents
RR_APPLICATION_INFORMATION
Information element
Value/remark
Protocol Discriminator
RR Management Protocol (0110)
Skip Indicator
Message Type
Application Information Message type
APDU ID
APDU ID -> RRLP => 0000
APDU Flags
Bit1=0 -> Last or only segment
Bit2=0 -> First or only segment
Bit3=0 -> Command or Final Response
Bit4=spare
APDU Data
2-N Byte ASN.1 Coded
Step 12 and 16: RRLP Measure Position Request
Step 13 and 17: RRLP Measure Position Response
Step 14: RRLP Assistance Data
Step 15: RRLP Assistance Data Ack
RRLP Measure Position Request 1 (Step 12):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer 0 to 7
1
component
CHOICE
msrPositionReq
methodType
CHOICE
msBased
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
5
accuracy
Integer (0-127)
127
useMultipleSets
ENUMERATED
oneSet
gps-AssistData
SEQUENCE
Assistance Data Reference Time
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Response 1 (Step 13):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
msrPositionRsp
locationError
SEQUENCE
locErrorReason
ENUMERATED
gpsLocCalAssDataMissing or gpsAssDataMissing
additionalAssistanceData
SEQUENCE
gpsAssistanceData
OCTET STRING
Indicates missing assistance data elements
extended-reference
SEQUENCE
Rel5 and later
The value returned by the MS shall equal the value received from the SS in the earlier Measure Position Request
RRLP Assistance Data (Step 14):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
SS shall send zero, one or more RRLP Assistance Data messages containing the requested assistance data requested in step 13, if available from TS 51.010-7 sub clauses 5.1.3 to 5.1.8. Each message shall contain a maximum of 242 octets.
moreAssDataToBeSent
ENUMERATED
R98, R99, Rel 4: 1 or 0.
If SS sends more than one RRLP assistance data delivery message the moreAssDataToBeSent field shall be set accordingly.
Rel 5 and later: 1, except in the case of the final Assistance Data message when the following Measure Position Request contains no additional Assistance Data (in which case: 0)
extended-reference
SEQUENCE
Rel 5 and later
RRLP Assistance Data Ack (Step 15):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
assistanceDataAck
RRLP Measure Position Request 2 (Step 16):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
msrPositionReq
methodType
CHOICE
msBased
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
5
accuracy
Integer (0-127)
127
useMultipleSets
ENUMERATED
oneSet
gps-AssistData
SEQUENCE
May contain further assistance data from TS 51.010-7 as requested by the MS in step 13
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Response 2 (Step 17):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
msrPositionRsp
A valid response will contain LocationInfo otherwise LocationError will be returned
gps-MeasureInfo
SEQUENCE
Any value of the parameters is acceptable.
locationError
SEQUENCE
Any error value is acceptable.
extended-reference
SEQUENCE
Rel5 and later
The value returned by the MS shall equal the value received from the SS in the earlier Measure Position Request
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4.4 Multiple RRLP Requests with same Reference Number
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4.4.1 Conformance requirement:
|
When after reception of a Measure Position Request component, but before responding with a Measure Position Response or Protocol Error Component, the MS receives a new RRLP message with the Measure Position Request component, the MS ignores the latter component if the old and new RRLP Measure Position Request components have the same Reference Number.
The SMLC may use the same Reference Number or different Reference Numbers for different RRLP components within the same pseudo-segmentation sequence.
Test References
3GPP TS04.31 sub clause 2.5.5
3GPP TS04.31 sub clause 3.2
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4.4.2 Test Purpose
|
Verifies that a MS sends a correct positioning capability via control classmark sending. MS shall ignore the second RRLP MEASURE POSITION REQUEST if the second RRLP MEASURE POSITION REQUEST has the same REFERENCE NUMBER as in the previous one. The MS shall send back RRLP MEASURE POSITION RESPONSE to SS after finishing the current measurement.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4.4.3 Method of Test
|
Initial Conditions:
System Simulator:
Serving Cell: default parameters.
Satellite signals: No GPS signal available.
Mobile Station:
The MS is MM-state "idle, updated" with valid TMSI and CKSN.
Specific PICS statements
- TSPC_MS_RRLP_RELEASE
PIXIT statements
-
Test Procedure:
The MS is paged with a PAGING REQUEST TYPE 1 message. The MS performs control early classmark sending to provide LCS positioning method capability.
After sending CIPHERING MODE COMPLETE message the MS receives RR APPLICATION INFORMATION messages containing RRLP Assistance Data messages.
The SS then sends an RR APPLICATION INFORMATION message containing an RRLP Measure Position Request including further assistance data to start the measurement.
Option 1: The MS then performs positioning measurements. After a delay to of 8 seconds, the SS sends the second RRLP MEASURE POSITION REQUEST with the same REFERENCE NUMBER as the first one (this delay shall be cancelled in the event of option 2). The MS shall ignore the second RRLP MEASURE POSITION REQUEST. The MS sends RRLP MEASURE POSITION RESPONSE to SS with the measurement data after finishing the measurement.
Option 2: The MS may request additional assistance data by immediately sending an RRLP Measure Position Response message containing a location error with IE LocErrorReason set to gpsAssDataMissing. If the MS requests additional assistance data that is available in the SS, then the SS provides the requested assistance data in zero, one or more RRLP Assistance Data delivery messages followed by a second RRLP Measure Position Request message which may include further assistance data. If the MS requests additional assistance data and the entire requested assistance data is not available in the SS, then the SS sends the second RRLP Measure Position Request message without assistance data. The MS then performs positioning measurements and the SS sends the third RRLP MEASURE POSITION REQUEST with the same REFERENCE NUMBER as the second one. The MS shall ignore the third RRLP MEASURE POSITION REQUEST. The MS sends RRLP MEASURE POSITION RESPONSE to SS with the measurement data after finishing the measurement.
The satellite signals should be made available after sending the second Measure Position request (in case of option 1) and third Measure Position request (in case of option 2)
Maximum duration of the test:
5 minutes.
Expected Sequence
Step
Direction
Message
Comments
1
SS->MS
PAGING REQUEST TYPE I
2
MS -> SS
CHANNEL REQUEST
Establishment cause indicates “answer to paging”.
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS->SS
PAGING RESPONSE
Message is contained in SABM.
“mobile station classmark 2” includes settings for ES_IND.
5
MS->SS
CLASSMARK CHANGE
“mobile station classmark 2” includes settings for ES_IND.
“mobile station classmark 3” includes settings for Positioning. The setting for positioning specifies Positioning Method capability and Positioning Method Support. In the position method support (5 bit field), Bit 2 is set to 1 (MS-Based GPS)
6
SS -> MS
AUTHENTICATION REQUEST
7
MS -> SS
AUTHENTICATION RESPONSE
8
SS -> MS
CIPHERING MODE COMMAND
9
MS -> SS
CIPHERING MODE COMPLETE
10
SS
SS starts ciphering.
11
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data
12
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck
13
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data
14
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck
15
SS -> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request 1
16
MS (Option 1)
or
MS->SS
(Option 2)
-
or
RR APPLICATION INFORMATION
If no message is received from the MS within 8 seconds, then the SS shall assume that the MS is performing the measurement (Option 1). The SS continues to step 17.
If the MS sends RRLP Measure Position Response:
locationError with gpsAssDataMissing (Option 2) within 8 seconds, then the SS continues to step 16a.
16a
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data.
If the MS requested additional assistance data in step 16 that is available in the SS, then SS provides the requested data in zero, one or more RRLP Assistance Data delivery messages.
16b
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck.
If the SS sent additional assistance data in step 16a, the MS acknowledges the received assistance data.
16c
SS-> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request 2.
If the MS requested additional assistance data in step 16 that is available in the SS, this message may include further assistance data.
16d
MS (Option 2)
MS is performing the measurement (Option 2)
17
SS -> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request 2 with same reference number as in Request 1 (Option 1)
or
RRLP Measure Position Request 3 with same reference number as in Request 2 (Option 2)
Note: The satellite signals should be made available to MS after sending this message
18
MS -> SS
RR APPLICATION INFORMATION
RRLP Measure Position Response:
locationInfo
19
SS -> MS
CHANNEL RELEASE
The main signalling link is released
Specific Message Contents
RR_APPLICATION_INFORMATION
Information element
Value/remark
Protocol Discriminator
RR Management Protocol (0110)
Skip Indicator
Message Type
Application Information Message type
APDU ID
APDU ID -> RRLP => 0000
APDU Flags
Bit1=0 -> Last or only segment
Bit2=0 -> First or only segment
Bit3=0 -> Command or Final Response
Bit4=spare
APDU Data
2-N Byte ASN.1 Coded
Step 15, 16c, 17: RRLP Measure Position Request
Step 16, 18: RRLP Measure Position Response
Step 11, 13, 16a: RRLP Assistance Data
Step 12, 14, 16b: RRLP Assistance Data Ack
RRLP Assistance Data (Step 11):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
navigationModel
SEQUENCE
PRNs 4,6,9. See TS 51.010-7 sub clause 5.1.5
moreAssDataToBeSent
ENUMERATED
1
extended-reference
SEQUENCE
Rel 5 and later
RRLP Assistance Data Ack (Steps 12, 14, 16b):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
assistanceDataAck
RRLP Assistance Data (Step 13):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
navigationModel
SEQUENCE
PRNs 10,13,22. See TS 51.010-7 sub clause 5.1.5
ionosphericModel
SEQUENCE
See TS 51.010-7 sub clause 5.1.6
moreAssDataToBeSent
ENUMERATED
R98, R99, Rel 4: 0.
Rel 5 and later: 1
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Request 1 (Step 15):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
msrPositionReq
methodType
CHOICE
msBased
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
5
accuracy
Integer (0-127)
127
useMultipleSets
ENUMERATED
oneSet
gps-AssistData
SEQUENCE
referenceTime
SEQUENCE
See TS 51.010-7 sub clause 5.1.3
refLocation
SEQUENCE
See TS 51.010-7 sub clause 5.1.4
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Response (Step 16 (Option 2)):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
msrPositionRsp
locationError
SEQUENCE
locErrorReason
ENUMERATED
gpsAssDataMissing
additionalAssistanceData
SEQUENCE
gpsAssistanceData
OCTET STRING
Indicates missing assistance data elements
extended-reference
SEQUENCE
Rel5 and later
The value returned by the MS shall equal the value received from the SS in the earlier Measure Position Request
RRLP Assistance Data (Step 16a):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
If the MS requested further assistance data in Step 16 (Option 2) that is available in the SS, SS shall send zero, one or more RRLP Assistance Data messages containing the requested assistance data from TS 51.010-7 sub clauses 5.1.3 to 5.1.8. Each message shall contain a maximum of 242 octets.
moreAssDataToBeSent
ENUMERATED
R98, R99, Rel 4: 1 or 0.
If SS sends more than one RRLP assistance data delivery message the moreAssDataToBeSent field shall be set accordingly.
Rel 5 and later: 1, except in the case of the final Assistance Data message when the following Measure Position Request contains no additional Assistance Data (in which case: 0)
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Request 2 (Step 16c):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
msrPositionReq
methodType
CHOICE
msBased
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
5
accuracy
Integer (0-127)
127
useMultipleSets
ENUMERATED
oneSet
gps-AssistData
SEQUENCE
May contain further assistance data from TS 51.010-7 as requested by the MS in step 16 (Option 2).
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Request 2 (Option 1) or Request 3 (Option 2) (Step 17):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
msrPositionReq
methodType
CHOICE
msAssisted
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
5
useMultipleSets
ENUMERATED
oneSet
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Response (Step 18):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
msrPositionRsp
(A valid response will contain LocationInfo)
locationInfo
SEQUENCE
Any value is acceptable.
extended-reference
SEQUENCE
Rel5 and later
The value returned by the MS shall equal the value received from the SS in the earlier Measure Position Request
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4.5 Multiple RRLP Requests with different Reference Number
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4.5.1 Conformance requirement:
|
When after reception of a Measure Position Request component, but before responding with a Measure Position Response or Protocol Error Component, the MS receives a new RRLP message with the Measure Position Request component, the MS aborts activity for the former component, and starts to act according to the latter component, if the old and new RRLP Measure Position Request components have different Reference Numbers.
The SMLC may use the same Reference Number or different Reference Numbers for different RRLP components within the same pseudo-segmentation sequence.
Test References
3GPP TS04.31 sub clause 2.5.5
3GPP TS04.31 sub clause 3.2
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4.5.2 Test Purpose
|
Verifies that a MS sends a correct positioning capability via control classmark sending. MS shall terminate the current location measurement if the second RRLP MEASURE POSITION REQUEST is received with a different REFERENCE NUMBER. The MS shall perform the measurement according to the newly received RRLP MEASURE POSITION REQUEST. The MS shall send back RRLP MEASURE POSITION RESPONSE to SS after finishing the measurement.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4.5.3 Method of Test
|
Initial Conditions:
System Simulator:
Serving Cell: default parameters.
Satellite signals: No GPS signal available.
Mobile Station:
The MS is MM-state "idle, updated" with valid TMSI and CKSN.
Specific PICS statements
- TSPC_MS_RRLP_RELEASE
PIXIT statements
-
Test Procedure:
The MS is paged with a PAGING REQUEST TYPE 1 message. The MS performs control early classmark sending to provide LCS positioning method capability.
After sending CIPHERING MODE COMPLETE message the MS receives RR APPLICATION INFORMATION messages containing RRLP Assistance Data messages.
The SS then sends an RR APPLICATION INFORMATION message containing an RRLP Measure Position Request including further assistance data to start the measurement.
Option 1: The MS then performs positioning measurements. After a delay of 8 seconds, the SS sends the second RRLP MEASURE POSITION REQUEST with a different REFERENCE NUMBER from the first one (this delay shall be cancelled in the event of option 2). The MS shall terminate the current location measurement and perform the measurement according to the newly received RRLP MEASURE POSITION REQUEST. The MS sends RRLP MEASURE POSITION RESPONSE to SS with the measurement data after finishing the measurement.
Option 2: The MS may request additional assistance data by immediately sending an RRLP Measure Position Response message containing a location error with IE LocErrorReason set to gpsAssDataMissing. If the MS requests additional assistance data that is available in the SS, then the SS provides the requested assistance data in zero, one or more RRLP Assistance Data delivery messages followed by a second RRLP Measure Position Request message which may include further assistance data. If the MS requests additional assistance data and the entire requested assistance data is not available in the SS, then the SS sends the second RRLP Measure Position Request message without assistance data. The MS then performs positioning measurements and the SS sends the third RRLP MEASURE POSITION REQUEST with a different REFERENCE NUMBER from the second one. The MS shall terminate the current location measurement and perform the measurement according to the newly received RRLP MEASURE POSITION REQUEST, including the possibility of repeating the request for more assistance data (Option 2b). The MS sends RRLP MEASURE POSITION RESPONSE to SS with the measurement data after finishing the measurement.
The satellite signals should be made available after sending the second Measure Position request (in case of option 1) and third Measure Position request (in case of option 2)
Maximum duration of the test:
5 minutes.
Expected Sequence
Step
Direction
Message
Comments
1
SS->MS
PAGING REQUEST TYPE I
2
MS -> SS
CHANNEL REQUEST
Establishment cause indicates “answer to paging”.
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS->SS
PAGING RESPONSE
Message is contained in SABM.
“mobile station classmark 2” includes settings for ES_IND.
5
MS->SS
CLASSMARK CHANGE
“mobile station classmark 2” includes settings for ES_IND.
“mobile station classmark 3” includes settings for Positioning. The setting for positioning specifies Positioning Method capability and Positioning Method Support. In the position method support (5 bit field), Bit 2 is set to 1 (MS-Based GPS)
6
SS -> MS
AUTHENTICATION REQUEST
7
MS -> SS
AUTHENTICATION RESPONSE
8
SS -> MS
CIPHERING MODE COMMAND
9
MS -> SS
CIPHERING MODE COMPLETE
10
SS
SS starts ciphering.
11
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data
12
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck
13
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data
14
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck
15
SS -> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request 1
16
MS (Option 1)
or
MS->SS
(Option 2)
-
or
RR APPLICATION INFORMATION
If no message is received from the MS within 8 seconds, then the SS shall assume that the MS is performing the measurement (Option 1). The SS continues to step 17.
If the MS sends RRLP Measure Position Response:
locationError with gpsAssDataMissing (Option 2) within 8 seconds, then the SS continues to step 16a.
16a
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data.
If the MS requested additional assistance data in step 16 that is available in the SS, then SS provides the requested data in zero, one or more RRLP Assistance Data delivery messages.
16b
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck.
If the SS sent additional assistance data in step 16a, the MS acknowledges the received assistance data.
16c
SS-> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request 2.
If the MS requested additional assistance data in step 16 that is available in the SS, this message may include further assistance data.
16d
MS (Option 2)
MS is performing the measurement (Option 2)
17
SS -> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request 2 with different reference number as in Request 1 (Option 1)
or
RRLP Measure Position Request 3 with different reference number as in Request 2 (Option 2)
Note: The satellite signals should be made available to MS after sending this message
18
MS -> SS
RR APPLICATION INFORMATION
RRLP Measure Position Response:
locationInfo (Option 1 or 2a)
Check reference number is 2
or
locationError with gpsAssDataMissing (Option 2b)
Check reference number is 2
18a
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data.
If the MS requested additional assistance data in step 18 that is available in the SS, then SS provides the requested data in zero, one or more RRLP Assistance Data delivery messages.
18b
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck.
If the SS sent additional assistance data in step 18a, the MS acknowledges the received assistance data.
18c
SS-> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request.
If the MS requested additional assistance data in step 18 that is available in the SS, this message may include further assistance data.
18d
MS-> SS
RR APPLICATION INFORMATION
RRLP Measure Position Response.
If the MS requested additional assistance data in step 18 this message contains locationInfo.
19
SS -> MS
CHANNEL RELEASE
The main signalling link is released
Specific Message Contents
RR_APPLICATION_INFORMATION
Information element
Value/remark
Protocol Discriminator
RR Management Protocol (0110)
Skip Indicator
Message Type
Application Information Message type
APDU ID
APDU ID -> RRLP => 0000
APDU Flags
Bit1=0 -> Last or only segment
Bit2=0 -> First or only segment
Bit3=0 -> Command or Final Response
Bit4=spare
APDU Data
2-N Byte ASN.1 Coded
Step 15, 16c, 17, 18c: RRLP Measure Position Request
Step 16, 18, 18d: RRLP Measure Position Response
Step 11, 13, 16a, 18a: RRLP Assistance Data
Step 12, 14, 16b, 18b: RRLP Assistance Data Ack
RRLP Assistance Data (Step 11):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
navigationModel
SEQUENCE
PRNs 4,6,9. See TS 51.010-7 sub clause 5.1.5
moreAssDataToBeSent
ENUMERATED
1
extended-reference
SEQUENCE
Rel 5 and later
RRLP Assistance Data Ack (Steps 12, 14, 16b and 18b):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
assistanceDataAck
RRLP Assistance Data (Step 13):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
navigationModel
SEQUENCE
PRNs 10,13,22. See TS 51.010-7 sub clause 5.1.5
ionosphericModel
SEQUENCE
See TS 51.010-7 sub clause 5.1.6
moreAssDataToBeSent
ENUMERATED
R98, R99, Rel 4: 0.
Rel 5 and later: 1
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Request 1 (Step 15):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
msrPositionReq
methodType
CHOICE
msBased
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
5
accuracy
Integer (0-127)
127
useMultipleSets
ENUMERATED
oneSet
gps-AssistData
SEQUENCE
referenceTime
SEQUENCE
See TS 51.010-7 sub clause 5.1.3
refLocation
SEQUENCE
See TS 51.010-7 sub clause 5.1.4
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Response (Step 16 (Option 2)):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
msrPositionRsp
locationError
SEQUENCE
locErrorReason
ENUMERATED
gpsAssDataMissing
additionalAssistanceData
SEQUENCE
gpsAssistanceData
OCTET STRING
Indicates missing assistance data elements
extended-reference
SEQUENCE
Rel5 and later
The value returned by the MS shall equal the value received from the SS in the earlier Measure Position Request
RRLP Assistance Data (Step 16a):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
If the MS requested further assistance data in Step 16 (Option 2) that is available in the SS, SS shall send zero, one or more RRLP Assistance Data messages containing the requested assistance data from TS 51.010-7 sub clauses 5.1.3 to 5.1.8. Each message shall contain a maximum of 242 octets.
moreAssDataToBeSent
ENUMERATED
R98, R99, Rel 4: 1 or 0.
If SS sends more than one RRLP assistance data delivery message the moreAssDataToBeSent field shall be set accordingly.
Rel 5 and later: 1, except in the case of the final Assistance Data message when the following Measure Position Request contains no additional Assistance Data (in which case: 0)
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Request 2 (Step 16c):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
msrPositionReq
methodType
CHOICE
msBased
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
5
accuracy
Integer (0-127)
127
useMultipleSets
ENUMERATED
oneSet
gps-AssistData
SEQUENCE
May contain further assistance data from TS 51.010-7 as requested by the MS in step 16 (Option 2).
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Request 2 (Option 1) or Request 3 (Option 2) (Step 17):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
msrPositionReq
methodType
CHOICE
msBased
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
5
accuracy
Integer (0-127)
127
useMultipleSets
ENUMERATED
oneSet
gps-AssistData
SEQUENCE
referenceTime
SEQUENCE
See TS 51.010-7 sub clause 5.1.3
refLocation
SEQUENCE
See TS 51.010-7 sub clause 5.1.4
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Response (Step 18 (Option 1 or 2a) or Step 18d (Option 2b)):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
msrPositionRsp
(A valid response will contain LocationInfo otherwise LocationError will be returned)
locationInfo
SEQUENCE
Any value is acceptable.
locationError
SEQUENCE
Any error value is acceptable except gpsAssDataMissing.
extended-reference
SEQUENCE
Rel5 and later
The value returned by the MS shall equal the value received from the SS in the earlier Measure Position Request
RRLP Measure Position Response (Step 18 (Option 2b)):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
msrPositionRsp
locationError
SEQUENCE
locErrorReason
ENUMERATED
gpsAssDataMissing
additionalAssistanceData
SEQUENCE
gpsAssistanceData
OCTET STRING
Indicates missing assistance data elements
extended-reference
SEQUENCE
Rel5 and later
The value returned by the MS shall equal the value received from the SS in the earlier Measure Position Request
RRLP Assistance Data (Step 18a):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
If the MS requested further assistance data in Step 18 (Option 2b) that is available in the SS, SS shall send zero, one or more RRLP Assistance Data messages containing the requested assistance data from TS 51.010-7 sub clauses 5.1.3 to 5.1.8. Each message shall contain a maximum of 242 octets.
moreAssDataToBeSent
ENUMERATED
R98, R99, Rel 4: 1 or 0.
If SS sends more than one RRLP assistance data delivery message the moreAssDataToBeSent field shall be set accordingly.
Rel 5 and later: 1, except in the case of the final Assistance Data message when the following Measure Position Request contains no additional Assistance Data (in which case: 0)
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Request (Step 18c):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
msrPositionReq
methodType
CHOICE
msBased
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
5
accuracy
Integer (0-127)
127
useMultipleSets
ENUMERATED
oneSet
gps-AssistData
SEQUENCE
May contain further assistance data from TS 51.010-7 as requested by the MS in step 18 (Option 2b).
extended-reference
SEQUENCE
Rel 5 and later
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4.6 RR Management Commands
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4.6.1 Conformance requirement
|
A target MS shall terminate any positioning procedure or the transfer of RRLP positioning assistance data without sending any response to the SMLC if any RR message is received from the BSC that starts some other RR management procedure, including a new positioning procedure. The new RR procedure shall then be executed by the MS.
Upon receiving the HO or other RR management command, the MS will stop the location procedure and start on handover or other RR management procedure, since this has higher priority than location. The MS will then send the HO complete or other RR management response message to BSC.
The SMLC may use the same Reference Number or different Reference Numbers for different RRLP components within the same pseudo-segmentation sequence.
Test References
3GPP TS 03.71 sub clause 7.11.5,
3GPP TS 03.71 sub clause 10.6
3GPP TS04.31 sub clause 3.2
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4.6.2 Test Purpose
|
Verifies that a MS sends a correct positioning capability via control classmark sending. MS shall terminate the current location measurement if an RR MANAGEMENT command is received during the measurement procedure. The MS shall send an RR MANAGEMENT RESPONSE message to SS when the RR MANAGEMENT procedure is complete. The MS shall perform the measurement according to the newly received RRLP MEASURE POSITION REQUEST and send back RRLP MEASURE POSITION RESPONSE to SS after finishing the measurement.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.9.4.6.3 Method of Test
|
Initial Conditions:
System Simulator:
Serving Cell: default parameters.
Satellite signals: No GPS signal available.
Mobile Station:
The MS is MM-state "idle, updated" with valid TMSI and CKSN.
Specific PICS statements
- TSPC_MS_RRLP_RELEASE
PIXIT statements
-
Test Procedure:
The MS is paged with a PAGING REQUEST TYPE 1 message. The MS performs control early classmark sending to provide LCS positioning method capability.
After sending CIPHERING MODE COMPLETE message the MS receives RR APPLICATION INFORMATION messages containing RRLP Assistance Data messages.
The SS then sends an RR APPLICATION INFORMATION message containing an RRLP Measure Position Request including further assistance data to start the measurement.
Option 1: The MS then performs positioning measurements. After a delay of 8 seconds the SS sends an RR MANAGEMENT command. The MS shall terminate the current location measurement and perform the RR MANAGEMENT command. The MS sends an RR MANAGEMENT RESPONSE message to SS when the RR MANAGEMENT procedure is complete. The SS sends a new RRLP MEASURE POSITION REQUEST including assistance data and the MS sends RRLP MEASURE POSITION RESPONSE to SS with the measurement data finishing the measurement according to the newly received RRLP MEASUREMENT POSITION REQUEST (possibly by requesting additional assistance data first).
Option 2: The MS may request additional assistance data by immediately sending an RRLP Measure Position Response message containing a location error with IE LocErrorReason set to gpsAssDataMissing. If the MS requests additional assistance data that is available in the SS, then the SS provides the requested assistance data in zero, one or more RRLP Assistance Data delivery messages followed by a second RRLP Measure Position Request message which may include further assistance data. If the MS requests additional assistance data and the entire requested assistance data is not available in the SS, then the SS sends the second RRLP Measure Position Request message without assistance data. The MS then performs positioning measurements and the SS sends a RR MANAGEMENT command. The MS shall terminate the current location measurement and perform the RR MANAGEMENT command. The MS sends a RR MANAGEMENT RESPONSE message to SS when the RR MANAGEMENT procedure is complete. The SS sends a new RRLP MEASURE POSITION REQUEST including assistance data and the MS either sends RRLP MEASURE POSITION RESPONSE to SS with the measurement data finishing the measurement according to the newly received RRLP MEASUREMENT POSITION REQUEST or requests more assistance data and then sends RRLP MEASURE POSITION RESPONSE to SS with the measurement data.
The satellite signals should be made available after sending the second Measure Position request (in case of option 1) and third Measure Position request (in case of option 2)
Maximum duration of the test:
5 minutes.
Expected Sequence
Step
Direction
Message
Comments
1
SS->MS
PAGING REQUEST TYPE I
2
MS -> SS
CHANNEL REQUEST
Establishment cause indicates “answer to paging”.
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS->SS
PAGING RESPONSE
Message is contained in SABM.
“mobile station classmark 2” includes settings for ES_IND.
5
MS->SS
CLASSMARK CHANGE
“mobile station classmark 2” includes settings for ES_IND.
“mobile station classmark 3” includes settings for Positioning. The setting for positioning specifies Positioning Method capability and Positioning Method Support. In the position method support (5 bit field), Bit 2 is set to 1 (MS-Based GPS)
6
SS -> MS
AUTHENTICATION REQUEST
7
MS -> SS
AUTHENTICATION RESPONSE
8
SS -> MS
CIPHERING MODE COMMAND
9
MS -> SS
CIPHERING MODE COMPLETE
10
SS
SS starts ciphering.
11
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data
12
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck
13
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data
14
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck
15
SS -> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request 1
16
MS (Option 1)
or
MS->SS
(Option 2)
-
or
RR APPLICATION INFORMATION
If no message is received from the MS within 8 seconds, then the SS shall assume that the MS is performing the measurement (Option 1). The SS continues to step 17.
If the MS sends RRLP Measure Position Response:
locationError with gpsAssDataMissing (Option 2) within 8 seconds, then the SS continues to step 17a.
16a
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data.
If the MS requested additional assistance data in step 16 that is available in the SS, then SS provides the requested data in zero, one or more RRLP Assistance Data delivery messages.
16b
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck.
If the SS sent additional assistance data in step 16a, the MS acknowledges the received assistance data.
16c
SS-> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request 2.
If the MS requested additional assistance data in step 16 that is available in the SS, this message may include further assistance data.
16d
MS (Option 2)
MS is performing the measurement (Option 2)
17
SS -> MS
RR MANAGEMENT COMMAND
18
MS -> SS
RR MANAGEMENT COMPLETE
MS terminates the measurement procedure and act on the RR management command
19
SS -> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request 2 (Option 1) or RRLP Measure Position Request 3 (Option 2)
Note: The satellite signals should be made available to MS after sending this message
20
MS -> SS
RR APPLICATION INFORMATION
RRLP Measure Position Response:
locationInfo (Option 1 or 2a)
or
locationError with gpsAssDataMissing (Option 2b)
20a
SS -> MS
RR APPLICATION INFORMATION
RRLP Assistance Data.
If the MS requested additional assistance data in step 20 that is available in the SS, then SS provides the requested data in zero, one or more RRLP Assistance Data delivery messages.
20b
MS -> SS
RR APPLICATION INFORMATION
RRLP assistanceDataAck.
If the SS sent additional assistance data in step 20a, the MS acknowledges the received assistance data.
20c
SS-> MS
RR APPLICATION INFORMATION
RRLP Measure Position Request.
If the MS requested additional assistance data in step 20 that is available in the SS, this message may include further assistance data.
20d
MS-> SS
RR APPLICATION INFORMATION
RRLP Measure Position Response.
If the MS requested additional assistance data in step 20 this message contains locationInfo.
21
SS -> MS
CHANNEL RELEASE
The main signalling link is released
Specific Message Contents
RR_APPLICATION_INFORMATION
Information element
Value/remark
Protocol Discriminator
RR Management Protocol (0110)
Skip Indicator
Message Type
Application Information Message type
APDU ID
APDU ID -> RRLP => 0000
APDU Flags
Bit1=0 -> Last or only segment
Bit2=0 -> First or only segment
Bit3=0 -> Command or Final Response
Bit4=spare
APDU Data
2-N Byte ASN.1 Coded
Step 15, 16c, 19, 20c: RRLP Measure Position Request
Step 16, 20, 20d: RRLP Measure Position Response
Step 11, 13, 16a, 20a: RRLP Assistance Data
Step 12, 14, 16b, 20b: RRLP Assistance Data Ack
RRLP Assistance Data (Step 11):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
navigationModel
SEQUENCE
PRNs 4,6,9. See TS 51.010-7 sub clause 5.1.5
moreAssDataToBeSent
ENUMERATED
1
extended-reference
SEQUENCE
Rel 5 and later
RRLP Assistance Data Ack (Steps 12, 14, 16b, 20b):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
assistanceDataAck
RRLP Assistance Data (Step 13):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
navigationModel
SEQUENCE
PRNs 10,13,22. See TS 51.010-7 sub clause 5.1.5
ionosphericModel
SEQUENCE
See TS 51.010-7 sub clause 5.1.6
moreAssDataToBeSent
ENUMERATED
R98, R99, Rel 4: 0.
Rel 5 and later: 1
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Request 1 (Step 15):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
msrPositionReq
methodType
CHOICE
msBased
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
5
accuracy
Integer (0-127)
127
useMultipleSets
ENUMERATED
oneSet
gps-AssistData
SEQUENCE
referenceTime
SEQUENCE
See TS 51.010-7 sub clause 5.1.3
refLocation
SEQUENCE
See TS 51.010-7 sub clause 5.1.4
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Response (Step 16 (Option 2)):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
msrPositionRsp
locationError
SEQUENCE
locErrorReason
ENUMERATED
gpsAssDataMissing
additionalAssistanceData
SEQUENCE
gpsAssistanceData
OCTET STRING
Indicates missing assistance data elements
extended-reference
SEQUENCE
Rel5 and later
The value returned by the MS shall equal the value received from the SS in the earlier Measure Position Request
RRLP Assistance Data (Step 16a):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
If the MS requested further assistance data in Step 16 (Option 2) that is available in the SS, SS shall send zero, one or more RRLP Assistance Data messages containing the requested assistance data from TS 51.010-7 sub clauses 5.1.3 to 5.1.8. Each message shall contain a maximum of 242 octets.
moreAssDataToBeSent
ENUMERATED
R98, R99, Rel 4: 1 or 0.
If SS sends more than one RRLP assistance data delivery message the moreAssDataToBeSent field shall be set accordingly.
Rel 5 and later: 1, except in the case of the final Assistance Data message when the following Measure Position Request contains no additional Assistance Data (in which case: 0)
RRLP Measure Position Request 2 (Step 16c):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
1
component
CHOICE
msrPositionReq
methodType
CHOICE
msBased
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
5
accuracy
Integer (0-127)
127
useMultipleSets
ENUMERATED
oneSet
gps-AssistData
SEQUENCE
May contain further assistance data from TS 51.010-7 as requested by the MS in step 16 (Option 2).
extended-reference
SEQUENCE
Rel 5 and later
RR Management Command (Classmark Enquiry) (Step 17):
Information element
Value/remark
Encoded
(06 13)
Protocol Discriminator
RR Management Protocol (0110)
Skip Indicator
Classmark Enquiry Message Type
0001 0011
RRLP Measure Position Request 2 (Option 1) or Request 3 (Option 2) (Step 19):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
msrPositionReq
methodType
CHOICE
msBased
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
5
accuracy
Integer (0-127)
127
useMultipleSets
ENUMERATED
oneSet
gps-AssistData
SEQUENCE
referenceTime
SEQUENCE
See TS 51.010-7 sub clause 5.1.3
refLocation
SEQUENCE
See TS 51.010-7 sub clause 5.1.4
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Response (Step 20 (Option 1 or 2a) or Step 20d (Option 2b)):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
msrPositionRsp
(A valid response will contain LocationInfo otherwise LocationError will be returned)
locationInfo
SEQUENCE
Any value is acceptable.
locationError
SEQUENCE
Any error value is acceptable except gpsAssDataMissing.
extended-reference
SEQUENCE
Rel5 and later
The value returned by the MS shall equal the value received from the SS in the earlier Measure Position Request
RRLP Measure Position Response (Step 20 (Option 2b)):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
msrPositionRsp
locationError
SEQUENCE
locErrorReason
ENUMERATED
gpsAssDataMissing
additionalAssistanceData
SEQUENCE
gpsAssistanceData
OCTET STRING
Indicates missing assistance data elements
extended-reference
SEQUENCE
Rel5 and later
The value returned by the MS shall equal the value received from the SS in the earlier Measure Position Request
RRLP Assistance Data (Step 20a):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
assistanceData
gps-AssistData
SEQUENCE
If the MS requested further assistance data in Step 20 (Option 2b) that is available in the SS, SS shall send zero, one or more RRLP Assistance Data messages containing the requested assistance data from TS 51.010-7 sub clauses 5.1.3 to 5.1.8. Each message shall contain a maximum of 242 octets.
moreAssDataToBeSent
ENUMERATED
R98, R99, Rel 4: 1 or 0.
If SS sends more than one RRLP assistance data delivery message the moreAssDataToBeSent field shall be set accordingly.
Rel 5 and later: 1, except in the case of the final Assistance Data message when the following Measure Position Request contains no additional Assistance Data (in which case: 0)
extended-reference
SEQUENCE
Rel 5 and later
RRLP Measure Position Request (Step 20c):
Information element
Type
Value/remark
ASN.1 encoded
referenceNumber
Integer,0 to 7
2
component
CHOICE
msrPositionReq
methodType
CHOICE
msBased
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
5
accuracy
Integer (0-127)
127
useMultipleSets
ENUMERATED
oneSet
gps-AssistData
SEQUENCE
May contain further assistance data from TS 51.010-7 sub clauses 5.1.3 to 5.1.8 as requested by the MS in step 20 (Option 2b).
extended-reference
SEQUENCE
Rel 5 and later
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.10 Conventional GPS Network Induced Tests
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.10.1 Void
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.10.2 Network Induced Location Request Emergency Call on TCH Radio Channel
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.10.2.1 Network Induced Location Request Emergency Call on TCH Radio Channel for Mobiles Supporting Conventional GPS
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.10.2.1.1 Conformance requirements
|
1. With the MS in the "idle, updated" state, the user shall initiate an emergency after the number 112 (for GSM900 and 1800 MS), or 911 (for PCS 1900 MS in the USA), or 08 (for PCS 1900 MS in Mexico) has been entered by the user. The MS shall send a CHANNEL REQUEST message with correct establishment cause ("emergency call").
2. When a user requests an emergency call establishment the mobile station will send a CM SERVICE REQUEST message to the network with a CM service type information element indicating emergency call establishment and the correct CKSN and TMSI. A mobile station which implements the “LCS” option shall also implement the “Controlled Early Classmark Sending” option. A mobile station which implements the “Controlled Early Classmark Sending” option shall indicate it in the classmark (ES IND bit).
3. After sending the CM SERVICE REQUEST message the MS shall send a CLASSMARK CHANGE message. The “Mobile Station Classmark 3” information element shall correctly specify the positioning methods supported by the MS.
4. After the CM SERVICE ACCEPT message is received from the network, the MS shall send an EMERGENCY SETUP message.
5. After receipt of a CONNECT ACKNOWLEDGE message during correct establishment of the emergency call the MS shall indicate that the TCH is through connected in both directions.
6. On receiving the MEASURE POSITION REQUEST message the MS tries to perform the requested location measurements, and calculates its own position. It sends the results in the RRLP MEASURE POSITION RESPONSE message.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.10.2.1.2 References
|
3GPP TS 04.08/44.018 sub clauses 3.3.1.1 and 9.1.11.
3GPP TS 04.08/24.008 sub clauses 4.5.1.5, 5.2.1, 9.2.9, 10.5.1.6, 10.5.1.7.
3GPP TS 02.30 sub clause 4.
3GPP TS 04.31 sub clause 2.2.
70.10.2.1.3Test Purpose
To verify when a network instigates the LCS positioning procedure by sending RRLP (Measure Position Request) message, after a traffic channel has been established during an emergency call, the mobile responds with RRLP (Measure Position Response) containing MS location estimate.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.10.2.1.4 Method of Test
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.10.2.1.5 Initial Conditions
|
System Simulator (SS):
Serving Cell: default parameters.
Satellite signals: default conditions.
Mobile Station (MS):
The MS is in MM-state “idle, updated” with valued TMSI and CKSN.
SIM:
Normal SIM
Specific PICS statements
- TSPC_MS_RRLP_RELEASE
PIXIT statements
-
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.10.2.1.6 Void
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.10.2.1.7 Test Procedure
|
An Emergency Call is initiated with the MS. SIM card is included in the MS.
The emergency call is established with a late assignment.
After receiving the CONNECT ACKNOWLEDGE message from the MS, the SS sends an RR APPLICATION INFORMATION message containing an RRLP Measure Position Request on FACCH.
The MS then performs positioning measurements, and responds with a RR APPLICATION INFORMATION message containing a RRLP Measure Position Response.
The call is cleared by the SS.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.10.2.1.8 Maximum duration of the test
|
5 minutes.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.10.2.1.9 Expected Sequence
|
Step
Direction
Message
Comments
1
MS
The appropriate “emergency call number" is entered.
2
MS -> SS
CHANNEL REQUEST
Establishment cause is emergency call establishment.
3
SS -> MS
IMMEDIATE ASSIGNMENT
4
MS -> SS
CM SERVICE REQUEST
Message is contained in SABM. The CM service type IE indicates "emergency call establishment".
“mobile station classmark 2” includes settings for ES_IND.
5
MS->SS
CLASSMARK CHANGE
“mobile station classmark 2” includes settings for ES_IND.
“mobile station classmark 3” includes settings for Positioning. The setting for positioning specifies Positioning Method capability and Positioning Method Support. In the position method support (5 bit field), Bit 1 is set to 1 (Conventional GPS) and Bit 2 is set to 0 (no support for MS-based GPS)
6
SS -> MS
CM SERVICE ACCEPT
7
MS -> SS
EMERGENCY SETUP
8
SS -> MS
CALL PROCEEDING
9
SS -> MS
ALERTING
10
SS -> MS
ASSIGNMENT COMMAND
11
MS -> SS
ASSIGNMENT COMPLETE
12
SS -> MS
CONNECT
13
MS -> SS
CONNECT ACKNOWLEDGE
The MS indicates that the TCH is through connected in both directions.
14
SS-> MS
RR APPLICATION INFORMATION
(RRLP Measure Position Request)
15
MS -> SS
RR APPLICATION INFORMATION
(RRLP Measure Position Response)
16
SS -> MS
DISCONNECT
17
MS -> SS
RELEASE
18
SS -> MS
RELEASE COMPLETE
19
SS -> MS
CHANNEL RELEASE
The main signalling link is released.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.10.2.1.10 Specific Message Contents
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.10.2.1.10.1 RR APPLICATION INFORMATION
|
Information element
Value/remark
Protocol Discriminator
RR Management Protocol (0110)
Skip Indicator
Message Type
Application Information Message type
APDU ID
APDU ID -> RRLP => 0000
APDU Flags
Bit1=0 -> Last or only segment
Bit2=0 -> First or only segment
Bit3=0 -> Command or Final Response
Bit4=spare
APDU Data
2-N Byte ASN.1 Coded
RRLP (Measure Position Request),
RRLP (Measure Position Response)
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.10.2.1.10.2 RRLP Measure Position Request
|
Information element
Type
Value/remark
ASN.1 encoded
-
referenceNumber
Integer,0 to 7
1
component
CHOICE
msrPositionReq
methodType
CHOICE
msBased
positionMethod
ENUMERATED
gps
measureResponseTime
Integer 0 to 7
7
accuracy
Integer (0-127)
127
useMultipleSets
ENUMERATED
oneSet
extended-reference
SEQUENCE
Rel 5 and later
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.10.2.1.10.3 RRLP Measure Position Response
|
Information element
Type
Value/remark
ASN.1 encoded
-
referenceNumber
Integer,0 to 7
1
component
CHOICE
msrPositionRsp
A valid response will contain locationInfo otherwise locationError will be returned
locationInfo
SEQUENCE
Any value is acceptable.
locationError
SEQUENCE
Any error value is acceptable.
extended-reference
SEQUENCE
Rel5 and later
The value returned by the MS shall equal the value received from the SS in the earlier Measure Position Request
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.11 A-GPS Minimum Performance tests
|
This sub clause specifies the measurement procedures for the conformance test of the minimum performance requirements for GSM user equipment (MS) where the only Assisted Global Navigation Satellite System (A-GNSS) supported is Assisted Global Positioning System (A-GPS) L1 C/A. The procedures for MSs that support other or additional A-GNSSs are specified in sub clause 70.16.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.11.1 Abbreviations
|
A-GPS Assisted - Global Positioning System
A-GNSS Assisted Global Navigation Satellite System
C/A Coarse/Acquisition
ECEF Earth Centred, Earth Fixed
GPS Global Positioning System
GSS GPS System Simulator
HDOP Horizontal Dilution Of Precision
LOS Line Of Sight
WLS Weighted Least Square
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.11.2 GPS test conditions
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.11.2.1 GPS signals
|
The GPS signal is defined at the A-GPS antenna connector of the MS. For MS with integral antenna only, a reference antenna with a gain of 0 dBi is assumed.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.11.2.2 GPS frequency
|
The GPS signals shall be transmitted with a frequency accuracy of 0.025 PPM.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.11.2.3 GPS static propagation conditions
|
The propagation for the static performance measurement is an Additive White Gaussian Noise (AWGN) environment. No fading and multi-paths exist for this propagation model.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.11.2.4 GPS multi-path conditions
|
Doppler frequency difference between direct and reflected signal paths is applied to the carrier and code frequencies. The Carrier and Code Doppler frequencies of LOS and multi-path for GPS L1 signal are defined in table 70.11.2.1.
Table 70.11.2.1: Multi-path Conditions for GPS Signals
Initial relative Delay
[GPS chip]
Carrier Doppler frequency of tap [Hz]
Code Doppler frequency of tap [Hz]
Relative mean Power [dB]
0
Fd
Fd / N
0
0.5
Fd - 0.1
(Fd-0.1) /N
-6
NOTE: Discrete Doppler frequency is used for each tap.
N = fGPSL1/fchip, where fGPSL1 is the nominal carrier frequency of the GPS L1 signal (1575.42 MHz) and fchip is the GPS L1 C/A code chip rate (1.023 Mchips/s).
The initial carrier phase difference between taps shall be randomly selected between 0 and 2radians. The initial value shall have uniform random distribution.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.11.3 GSM test conditions
| |
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.11.3.1 GSM frequency band and frequency range
|
The tests in this sub clause are performed on one of the mid range ARFCNs of the GSM operating frequency band of the MS. The ARFCNs to be used for mid range are defined in Table 3.3
If the MS supports multiple frequency bands then the Sensitivity tests in sub clause 70.11.5 shall be repeated in each supported frequency band.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.11.3.2 GSM frequency
|
For all tests the GSM frequency shall be offset with respect to the nominal frequency by an amount equal to the sum of +0.025 PPM and the offset in PPM of the actual transmitted GPS carrier frequency with respect to the nominal GPS frequency.
|
683b5b8a98f7b1390ddd5516ea9247a2
|
51.010-1
|
70.11.4 A-GPS test conditions
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.