id
stringlengths 7
13
| title
stringlengths 7
396
| type
stringclasses 2
values | version
stringclasses 245
values | url
stringlengths 90
98
| scope
stringlengths 0
83.8k
|
|---|---|---|---|---|---|
102 933-2
|
Railway Telecommunications (RT); GSM-R improved receiver parameters; Part 2: Radio conformance testing
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/10293302/01.03.01_60/ts_10293302v010301p.pdf
|
The present document describes the technical characteristics and methods of testing the improved receiver performance for professional mobile stations 8 Watt (cab radio and EDOR) and 2 Watt professional small mobile station (GPH, OPH and OPS), for the Pan European digital cellular communications system and Personal Communication Systems (PCS) operating in the 900 MHz band (GSM 900), standardized by ETSI Special Mobile Group (SMG). The present document covers the requirements for testing the improved GSM-R receiver in order to provide sufficient performance for mobile equipment. It does not necessarily include all the characteristics which may be required by a user or subscriber, nor does it necessarily represent the optimum performance achievable. The present document is part of the GSM-series of technical specifications. The present document neither replaces any of the other GSM technical specifications or GSM related ETSs or ENs, nor is it created to provide full understanding of (or parts of) the GSM 900 system. The present document lists the additional test procedures, and provides the methods of test for testing a professional MS for conformance to the GSM standard. For a full description of the system, reference are made to all the GSM technical specifications or GSM related ETSs or ENs. Clause 2 provides a complete list of the GSM technical specifications, GSM related ETSs, ENs, and ETRs, on which this conformance test specifications is based. The present document applies to the unit which includes the hardware to establish a connection across the radio interface.
|
102 933-1
|
Railway Telecommunications (RT); GSM-R improved receiver parameters; Part 1: Requirements for radio reception
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/10293301/02.01.01_60/ts_10293301v020101p.pdf
|
The present document defines the Radio Frequency requirements specific for the professional Mobile Station. The measurement methods are specified in ETSI TS 102 933-2 [5] and ETSI TS 100 607-1 [2]. Requirements are defined for two categories of parameters: • Those that are required to provide compatibility between the radio channels, connected either to separate or common antennas, that are used in the system. This category also includes parameters providing compatibility with existing systems in the same or adjacent frequency bands. • Those that define the reception requirements for all types of professional MS. MSs may operate on more than one of the frequency bands specified in clause 4. These MSs, defined in ETSI EN 300 919 [1], are referred to as "Multi band MSs" in the present document.
|
102 933-1
|
Railway Telecommunications (RT); GSM-R improved receiver parameters; Part 1: Requirements for radio reception
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/10293301/01.03.01_60/ts_10293301v010301p.pdf
|
The present document defines the Radio Frequency requirements specific for the professional Mobile Station. The measurement methods are specified in ETSI TS 102 933-2 [5] and ETSI TS 100 607-1 [2]. Requirements are defined for two categories of parameters: • Those that are required to provide compatibility between the radio channels, connected either to separate or common antennas, that are used in the system. This category also includes parameters providing compatibility with existing systems in the same or adjacent frequency bands. • Those that define the reception requirements for all types of professional MS. MSs may operate on more than one of the frequency bands specified in clause 4. These MSs, defined in ETSI EN 300 919 [1], are referred to as "Multi band MSs" in the present document.
|
102 940
|
Intelligent Transport Systems (ITS); Security; ITS communications security architecture and security management
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/102940/01.03.01_60/ts_102940v010301p.pdf
|
The present document specifies a security architecture for Intelligent Transport System (ITS) communications. Based upon the security services defined in ETSI TS 102 731 [4], it identifies the functional entities required to support security in an ITS environment and the relationships that exist between the entities themselves and the elements of the ITS reference architecture defined in ETSI EN 302 665 [1]. The present document also identifies the roles and locations of a range of security services for the protection of transmitted information and the management of essential security parameters. These include identifier and certificate management, PKI processes and interfaces as well as basic policies and guidelines for trust establishment.
|
102 939-1
|
Digital Enhanced Cordless Telecommunications (DECT); Ultra Low Energy (ULE); Machine to Machine Communications; Part 1: Home Automation Network (phase 1)
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/10293901/01.03.01_60/ts_10293901v010301p.pdf
|
The present document specifies the first set of functionalities of the ETSI radio technology named DECT Ultra Low Energy (ULE). The set of features defined in the present document is named "Home Automation Network (HAN), phase 1", and is primarily targeted to provide a global M2M solution within domestic scenarios. However, this does not prevent the use of the present document in other scenarios. DECT Ultra Low Energy (ULE) Part 1 (the present document) provides the following basic functionalities: • New MAC layer procedures optimized for ULE: - Ultra-fast "expedited" MAC procedures allowing combined transmission of signalling and data packet in the very first frame. - Unlocked, ultra low duty cycle operation for battery powered Portable Part devices. - New Channel selection processes with channel pre-selection and management algorithms for collision prevention and collision avoidance. - U-plane protected service IPQR with automatic retransmission (ARQ) capabilities. • New DLC service (LU14) incorporating CCM authenticated encryption. • Network (NWK) Layer Connection Oriented model including CC (Call Control) and MM (Mobility Management) entities. • State of the art Security.
|
102 950-1
|
Methods for Testing and Specification (MTS); TTCN-3 Conformance Test Suite; Part 1: Implementation Conformance Statement (ICS)
|
TS
|
1.12.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/10295001/01.12.01_60/ts_10295001v011201p.pdf
|
The present document provides the Implementation Conformance Statement (ICS) pro forma for the conformance test suite for TTCN-3 as defined in ETSI ES 201 873-1 [1] in compliance with the relevant guidance given in the pro forma for TTCN-3 reference test suite ETSI TS 102 995 [4]. In the present document only the core language features, specified in ETSI ES 201 873-1 [1] have been considered but not the tool implementation (see ETSI ES 201 873-5 [i.1] and ETSI ES 201 873-6 [i.2]), language mapping (see ETSI ES 201 873-7 [i.3], ETSI ES 201 873-8 [i.4] and ETSI ES 201 873-9 [i.5]) and language extension (see e.g. ETSI ES 202 781 [i.6], ETSI ES 202 784 [i.7] and ETSI ES 202 785 [i.8]) aspects. The supplier of an implementation which is claimed to conform to ETSI ES 201 873-1 [1] is required to complete a copy of the ICS pro forma provided in the annex A of the present document.
|
102 943
|
Intelligent Transport Systems (ITS); Security; Confidentiality services; Release 2
|
TS
|
2.0.0
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/102943/02.00.00_60/ts_102943v020000p.pdf
|
The present document is the baseline for the definition of the Release 2 Confidentiality services.
|
102 950-3
|
Methods for Testing and Specification (MTS); TTCN-3 Conformance Test Suite; Part 3: Abstract Test Suite (ATS) and Implementation eXtra Information for Testing (IXIT)
|
TS
|
1.12.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/10295003/01.12.01_60/ts_10295003v011201p.pdf
|
The present document specifies the Abstract Test Suite (ATS) for the TTCN-3 conformance test suite, as defined in ETSI ES 201 873-1 [1] in compliance with the relevant guidance given in the pro forma for TTCN-3 reference test suite ETSI TS 102 950-2 [8]. The objective of the present document is to provide a basis for conformance tests for TTCN-3 tools giving a high probability of standard conformance with respect to TTCN-3 tools from different vendors. In the present document only the core language features, specified in ETSI ES 201 873-1 [1] have been considered but not the tool implementation (see ETSI ES 201 873-5 [i.1] and ETSI ES 201 873-6 [i.2]), language mapping (see ETSI ES 201 873-7 [i.3], ETSI ES 201 873-8 [i.4] and ETSI ES 201 873-9 [i.5]) and language extension (see ETSI ES 202 781 [i.6], ETSI ES 202 784 [i.7] and ETSI ES 202 785 [i.8]) aspects. The test notation used in the ATS attached in a zipped file is in TTCN-3 and it is part of the present document. Annex A provides the Tree and Tabular Combined Notation (TTCN-3) part of the ATS. Annex B provides the partial Protocol Implementation eXtra Information for Testing (PIXIT) pro forma of the ATS.
|
102 942
|
Intelligent Transport Systems (ITS); Security; Access Control
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/102942/01.01.01_60/ts_102942v010101p.pdf
|
The present document is the baseline for the definition of the Release 2 Access Control.
|
102 941
|
Intelligent Transport Systems (ITS); Security; Trust and Privacy Management
|
TS
|
1.4.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/102941/01.04.01_60/ts_102941v010401p.pdf
|
The present document specifies the trust and privacy management for Intelligent Transport Systems (ITS) communications. Based upon the security services defined in ETSI TS 102 731 [i.23] and the security architecture defined in ETSI TS 102 940 [5], it identifies the trust establishment and privacy management required to support security in an ITS environment and the relationships that exist between the entities themselves and the elements of the ITS reference architecture defined in ETSI EN 302 665 [i.25]. The present document identifies and specifies security services for the establishment and maintenance of identities and cryptographic keys in an Intelligent Transport Systems (ITS). Its purpose is to provide the functions upon which systems of trust and privacy can be built within an ITS.
|
102 932-2
|
Railway Telecommunications; ER-GSM frequencies; Part 2: ER-GSM additional radio conformance testing
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/10293202/01.01.01_60/ts_10293202v010101p.pdf
|
The present document describes the technical characteristics and methods of testing the improved receiver performance for professional mobile stations (professional MS), base stations (BS) and repeaters for the Pan European digital cellular communications system and Personal Communication Systems (PCS) operating in the 900 MHz band (GSM 900), standardized by ETSI Special Mobile Group (SMG). The present document is valid for equipment implemented according Phase2+ R99 onwards. The present document covers the conformance testing of radio equipment supporting the extended frequency range ER-GSM. Equipment not supporting the extended frequency range ER-GSM is not covered in this document. It does not necessarily include all the characteristics which may be required by a user or subscriber, nor does it necessarily represent the optimum performance achievable. It should be noted that a receiver with improved parameters is specified in TS 102 933-1 [7] The present document is part of the GSM-series of technical specifications. The present document neither replaces any of the other GSM technical specifications or GSM related ETSs or ENs, nor is it created to provide full understanding of (or parts of) the GSM 900 system. The present document lists the additional test procedures for testing the extended frequency band for ER-GSM. For a full description of the system, reference should be made to all the GSM technical specifications or GSM related ETSs or ENs. Clause 2 provides a complete list of the GSM technical specifications, GSM related ETSs, ENs and ETRs, on which this conformance test specifications is based. Equipment operating at the edge of the transmit and receive band might be subject to regulatory restrictions in some geographical regions. In areas where systems coexist the received interference power might have to be limited. Coexistence scenarios have been investigated in ECC Report 162 [i.2] providing also recommendations for the application of mitigation techniques. The present document applies to the unit which includes the hardware to establish a connection across the radio interface.
|
102 932-1
|
Railway Telecommunications; ER-GSM frequencies; Part 1: ER-GSM additional radio aspects
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/10293201/01.01.01_60/ts_10293201v010101p.pdf
|
ECC Decision ECC/DEC/(04)06 [i.2] of the 19th March 2004 and amended on the 26th June 2009 provides a possibility for a GSM-R extension into the bands 873 MHz to 876 MHz and 918 MHz to 921 MHz on a national basis. The present document defines the requirements for radio Transmission and Reception of mobile station (MS) and BTS for the pan-European digital cellular telecommunication system GSM-R. Requirements are defined for two categories of parameters: • Those that are required to provide compatibility between the radio channels, connected either to separate or common antennas, that are used in the system. This category also includes parameters providing compatibility with existing systems in the same or adjacent frequency bands. • Those that define the transmission and reception requirements for the MS and base stations. The present document defines some RF characteristics for the MS and base stations for the frequencies band R-GSM/ER-GSM. The precise measurement methods are specified in TS 102 932-2 [4] and TS 100 607-1 [2] and TS 151 026 [7]. Equipment may operate on more than one of the frequency bands specified in clause 4. MS defined in EN 300 919 [1], are referred to as "Multi band MSs" in the present document. Equipment operating at the edge of the transmit and receive band might be subject to regulatory restrictions in some geographical regions. In areas where systems coexist the received interference power might have to be limited. Coexistence scenarios have been investigated in ECC Report 162 [i.3] providing also recommendations for the application of mitigation techniques.
|
102 929
|
Speech and multimedia Transmission Quality (STQ); Procedures for the identification and selection of common modes of de-jitter buffers and echo cancellers
|
TS
|
2.3.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/102929/02.03.01_60/ts_102929v020301p.pdf
|
De-jitter buffers and echo cancellers have a major effect on voice and data transmission quality in telecommunication networks. They affect the three service categories of PSTN/ISDN voice, voiceband data (due to PSTN modem and fax calls), and ISDN circuit mode data. Since the requirements for the settings of de-jitter buffers differ for different services, the present document describes the activation and mode switching procedures of de-jitter buffers and echo cancellers, including the requirement for in-band tone activating and other control mechanisms. It is assumed that the clock accuracy of all elements involved is sufficiently high for application of the present document. The scope of the present document is considering de-jitter buffer usage in circuit-to-IP media gateways, such as residential, access or trunking gateways in context of NGN/IMS. The notion of circuit relates to a PSTN analog line or an ISDN 1x64 bearer channel. The current version of the present document contains additional de-Jitter Buffer requirements for the transmission of V.152, Echo Canceller Tests and de-Jitter Buffer Tests. The requirements for Echo Cancellers and de-Jitter Buffers in for speech transmission are out of scope in the present document. These requirements are covered in ETSI ES 202 718 [i.27]. The present document is: a) applicable: a1) to circuit-to-IP media gateways and communication services with a gateway interworking function operating at the level of a synchronous byte-stream, such as: service "voice-over-IP" (VoIP) without or with silence suppression; service "voiceband data-over-IP" (VBDoIP); and service "circuit-mode data-over-IP" (CMDoIP); a2) to IP-to-IP media gateways for dedicated interworking services between two IP domains, such as: service "IPDV reduction between two IP domains" with different Grade of Service (GoS) as e.g. described in Recommendation ITU-T G.799.3 [i.22]; service "RTP IPDV reduction between two RTP domains", which may be subject of an "RTP transport translator" topology (see IETF RFC 5117 [i.23] and Recommendation ITU-T H.248.88 [i.24]); but IP-to-IP media gateways are basically out of scope of the present document due to its focus on circuit-to-IP gateway types; and is: b) not applicable, because de-jitter buffers are not required: b1) to circuit-to-IP media gateways and communication services with a gateway interworking function operating at the level of individual packets as atomic units (i.e. an asynchronous packet-stream), such as: service "facsimile-over-IP" (FoIP) according to [i.7]; service "text-over-IP" (ToIP) according to [i.25]; and service "data-over-IP" (MoIP) according to [i.26]; b2) to IP-to-IP media gateways in general. Additionally the present document contains Transmission Requirements for Media Gateways (MGWs) with respect to voiceband data (VBD) and 64 kbit/s transparent data service. ETSI ETSI TS 102 929 V2.3.1 (2018-03) 7
|
102 929
|
Speech and multimedia Transmission Quality (STQ); Procedures for the identification and selection of common modes of de-jitter buffers and echo cancellers
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/102929/01.01.01_60/ts_102929v010101p.pdf
|
De-jitter buffers and echo cancellers have a major effect on voice and data transmission quality in telecommunication networks. They affect the three service categories of PSTN/ISDN voice, voiceband data (due to PSTN modem and fax calls), and ISDN circuit mode data. Since the requirements for the settings of de-jitter buffers differ for different services, the present document describes the activation and mode switching procedures of de-jitter buffers and echo cancellers, including the requirement for in-band tone activating and other control mechanisms. It is assumed that the clock accuracy of all elements involved is sufficiently high for application of the present document. The scope of the present document is considering de-jitter buffer usage in circuit-to-IP media gateways, such as residential, access or trunking gateways in context of NGN/IMS. The notion of circuit relates to a PSTN analog line or an ISDN 1x64 bearer channel. The current version of the present document contains additional de-Jitter Buffer requirements for the transmission of V.152, Echo Canceller Tests and de-Jitter Buffer Tests. The requirements for Echo Cancellers and de-Jitter Buffers in for speech transmission are out of scope in the present document. These requirements are covered in ETSI ES 202 718 [i.27]. The present document is: a) applicable: a1) to circuit-to-IP media gateways and communication services with a gateway interworking function operating at the level of a synchronous byte-stream, such as: service "voice-over-IP" (VoIP) without or with silence suppression; service "voiceband data-over-IP" (VBDoIP); and service "circuit-mode data-over-IP" (CMDoIP); a2) to IP-to-IP media gateways for dedicated interworking services between two IP domains, such as: service "IPDV reduction between two IP domains" with different Grade of Service (GoS) as e.g. described in Recommendation ITU-T G.799.3 [i.22]; service "RTP IPDV reduction between two RTP domains", which may be subject of an "RTP transport translator" topology (see IETF RFC 5117 [i.23] and Recommendation ITU-T H.248.88 [i.24]); but IP-to-IP media gateways are basically out of scope of the present document due to its focus on circuit-to-IP gateway types; and is: b) not applicable, because de-jitter buffers are not required: b1) to circuit-to-IP media gateways and communication services with a gateway interworking function operating at the level of individual packets as atomic units (i.e. an asynchronous packet-stream), such as: service "facsimile-over-IP" (FoIP) according to [i.7]; service "text-over-IP" (ToIP) according to [i.25]; and service "data-over-IP" (MoIP) according to [i.26]; b2) to IP-to-IP media gateways in general. Additionally the present document contains Transmission Requirements for Media Gateways (MGWs) with respect to voiceband data (VBD) and 64 kbit/s transparent data service. ETSI ETSI TS 102 929 V2.3.1 (2018-03) 7
|
102 903
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Compliance tests for cognitive interference mitigation for use by UHF RFID using Detect-And-Avoid (DAA) or other similar techniques
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/102903/01.01.01_60/ts_102903v010101p.pdf
|
The present document reports on the practical evaluation, demonstrations and certification procedures for the mitigation mechanisms for RFID systems operating in the band between 915 MHz to 921 MHz as described in [2]. The active mechanisms covered in this Technical Specification are intended to mitigate against any harmful interference generated by RFID interrogators towards ER-GSM terminals operated in the band between 918 MHz to 921 MHz. The report does not cover the location based methods presented in [2] nor does it include RFID tags operating in the band with a power levels up to -10 dBm.
|
102 925
|
Speech and multimedia Transmission Quality (STQ); Transmission requirements for Super-Wideband / Fullband handsfree and conferencing terminals from a QoS perspective as perceived by the user
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/102925/01.02.01_60/ts_102925v010201p.pdf
|
The present document provides speech & audio transmission performance requirements and measurement methods for handsfree functions of super-wideband/fullband terminals, including conferencing terminals. The present document provides requirements in order to optimize the end to end quality perceived by users. Users become more sensitive to voice and music quality (for music used in conversational services) when using ICT/terminal equipment and so are more demanding for further enhancement especially further extension of the audio coded bandwidth. For instance, this is the case for high quality conferencing services with music on hold, better background environment rendering and longer duration than normal point to point calls. Standardized super-wideband and fullband codecs are now available, some being also compatible with wideband codecs. The present document will consider only conversational services (that may be mixed with other services) and does not cover the streaming-only services. Such applications include: • Speech and audio communication including conferencing using high quality handsfree systems. • Bandwidth extension which may allow usage for some mixed content applications. • Super-wideband enhancement coupled with stereo/dichotic/multichannel. In the send path the signal may combine speech, music and environmental signals. The signal may be: • acoustically captured by a microphone; or • directly inserted through a digital or analog connection. In the receive path, the signal may combine: • communication signals such as described for send path, including environmental signals; and • signals coming from distributed applications (e.g. advertisement, music on hold, etc.).
|
102 924
|
Speech and multimedia Transmission Quality (STQ); Transmission requirements for Super-Wideband / Fullband handset and headset terminals from a QoS perspective as perceived by the user
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/102924/01.02.01_60/ts_102924v010201p.pdf
|
The present document provides speech & audio transmission performance requirements and measurement methods for handset and headset functions of super-wideband/fullband terminals. The present document provides requirements in order to optimize the end to end quality perceived by users. Users become more sensitive to voice and music quality (for music used in conversational services) when using ICT/terminal equipment and so are more demanding for further enhancement especially further extension of the audio coded bandwidth. For instance, this is the case for high quality conferencing services with music on hold, better background environment rendering and longer duration than normal point to point calls. Standardized super-wideband and fullband coders are now available, some being also compatible with wideband coders. The present document will consider only conversational services (that may be mixed with other services) and does not cover the streaming-only services. Such applications include: • Speech and audio communication including conferencing. • Bandwidth extension which may allow usage for some mixed content. • Super-wideband enhancement coupled with stereo/dichotic. The send path it can be characterized in two ways: • The signal picked up by microphone may combine speech, music and every type of environmental signal. • Direct insertion of any type of signal. For receive path, signal may be combine two types: • Communication signals such as described for send path. • Signal coming from distributed applications (e.g. advertisement, music on hold, etc.).
|
102 922-2
|
Smart Cards; Test specification for the ETSI aspects of the IC_USB interface; Part 2: UICC features (Release 7)
|
TS
|
7.0.0
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/10292202/07.00.00_60/ts_10292202v070000p.pdf
|
The present document covers the minimum characteristics which are considered necessary for the UICC in order to provide compliance to TS 102 600 [1]. The present document specifies the test cases for: • the characteristics of the Inter-Chip USB electrical interface between the USB UICC and the USB UICC- enabled terminal; • the initial communication establishment and the transport protocols; • the communication layers between the USB UICC and the USB UICC-enabled terminal. Test cases for the USB UICC relating to TS 102 221 [2] interface are out of scope of the present document.
|
102 922-1
|
Smart Cards; Test specification for the ETSI aspects of the IC_USB interface; Part 1: Terminal features (Release 7)
|
TS
|
7.3.0
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/10292201/07.03.00_60/ts_10292201v070300p.pdf
|
The present document covers the minimum characteristics which are considered necessary for the terminal in order to provide compliance to ETSI TS 102 600 [1]. The present document specifies the test cases for: • the characteristics of the Inter-Chip USB electrical interface between the USB UICC and the USB UICC-enabled terminal; • the initial communication establishment and the transport protocols; • the communication layers between the USB UICC and the USB UICC-enabled terminal. Test cases for the USB UICC-enabled terminal relating to ETSI TS 102 221 [2] interface are out of scope of the present document.
|
102 921
|
<empty>
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/102921/02.01.01_60/ts_102921v020101p.pdf
|
The present document contains the stage 3 specification for the mIa, dIa and mId reference points of the M2M architecture as identified in TS 102 690 [2].
|
102 921
|
Machine-to-Machine communications (M2M); mIa, dIa and mId interfaces
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/102921/01.03.01_60/ts_102921v010301p.pdf
|
The present document contains the stage 3 specification for the mIa, dIa and mId reference points of the M2M architecture as identified in TS 102 690 [2].
|
102 917-3
|
Intelligent Transport Systems (ITS); Test specifications for the channel congestion control algorithms operating in the 5,9 GHz range; Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/10291703/01.01.01_60/ts_10291703v010101p.pdf
|
The present document specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for the test specifications for the channel congestion control algorithms operating in the 5,9 GHz range as specified in TS 102 687 [i.2] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [5] and ETS 300 406 [6]. The test notation used in the ATS is TTCN-3 (see ES 201 873-1 [7]). The following test specification and design considerations can be found in the body of the present document: • the overall test suite structure; • the testing architecture; • the test methods and port definitions; • the test configurations; • TTCN styles and conventions; • the partial PIXIT proforma; • the modules containing the TTCN-3 ATS. Annex A provides the Partial Implementation Extra Information for Testing (PIXIT) Proforma of the ATS. Annex B provides the Testing and Test Control Notation (TTCN-3) part of the ATS.
|
102 902
|
Electromagnetic compatibility and Radio spectrum matters (ERM); Methods, parameters and test procedures for cognitive interference mitigation towards ER-GSM for use by UHF RFID using Detect-And-Avoid (DAA) or other similar techniques
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/102902/01.02.01_60/ts_102902v010201p.pdf
|
The present document provides the technical specifications for mitigation techniques and procedures for the coexistence of ER-GSM 900 terminals and RFID systems in the frequency range of 918 MHz to 921 MHz.
|
102 917-1
|
Intelligent Transport Systems (ITS); Test specifications for the channel congestion control algorithms operating in the 5,9 GHz range; Part 1: Protocol Implementation Conformance Statement (PICS)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/10291701/01.01.01_60/ts_10291701v010101p.pdf
|
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the test specifications for the channel congestion control algorithms operating in the 5,9 GHz range as specified in TS 102 687 [1] and TS 102 724 [2] and in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [4] and ETS 300 406 [5]. The supplier of a protocol implementation which is claimed to conform to TS 102 687 [1] and TS 102 724 [2] is required to complete a copy of the PICS proforma provided in annex A of the present document and is required to provide the information necessary to identify both the supplier and the implementation. In the present document only the ITS-G5A and ITS-G5B channels are covered.
|
102 916-3
|
Intelligent Transport Systems (ITS); Test specifications for the methods to ensure coexistence of Cooperative ITS G5 with RTTT DSRC; Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/10291603/01.01.01_60/ts_10291603v010101p.pdf
|
The present document specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma for the test specifications for the methods to ensure coexistence of cooperative ITS G5 with RTTT DSRC as specified in TS 102 792 [i.1] and ES 202 663 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [4] and ETS 300 406 [5]. The test notation used in the ATS is TTCN-3 (see ES 201 873-1 [6]). The following test specification- and design considerations can be found in the body of the present document: • the overall test suite structure; • the testing architecture; • the test methods and port definitions; • the test configurations; • TTCN styles and conventions; • the partial PIXIT proforma; • the modules containing the TTCN-3 ATS. Annex A provides the Partial Implementation Extra Information for Testing (PIXIT) Proforma of the ATS. Annex B provides the Testing and Test Control Notation (TTCN-3) part of the ATS.
|
102 916-2
|
Intelligent Transport Systems (ITS); Test specifications for the mitigation techniques to avoid interference between Cooperative ITS-G5 and TTT DSRC; Part 2: Test Suite Structure and Test Purposes (TSS & TP)
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/10291602/01.02.01_60/ts_10291602v010201p.pdf
|
The present document provides the Test Suite Structure and Test Purposes (TSS&TP) for the test specifications for the methods to ensure coexistence of cooperative ITS-G5 with TTT DSRC as specified in ETSI TS 102 792 [4] and ETSI EN 302 663 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [i.4] and ETSI ETS 300 406 [i.2].
|
102 916-1
|
Intelligent Transport Systems (ITS); Test specifications for the mitigation techniques to avoid interference between Cooperative ITS-G5 and TTT DSRC; Part 1: Protocol Implementation Conformance Statement (PICS)
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/10291601/01.02.01_60/ts_10291601v010201p.pdf
|
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the test specifications for the methods to ensure coexistence of cooperative ITS G5 with TTT DSRC as specified in ETSI TS 102 792 [3] and ETSI EN 302 663 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [2] and ETSI ETS 300 406 [i.2]. The supplier of a protocol implementation which is claimed to conform to ETSI TS 102 792 [3] and ETSI EN 302 663 [1] is required to complete a copy of the PICS proforma provided in annex A of the present document and is required to provide the information necessary to identify both the supplier and the implementation.
|
102 905
|
Digital Video Broadcasting (DVB); Technical Specification for DVB Services in the Home Network Phase 1
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/102905/02.01.01_60/ts_102905v020101p.pdf
|
The present document covers a subset of the use cases from the DVB Home Network commercial requirements (TM3422) and described in ETSI TS 102 905 (V1.1.1) [3]; it is therefore called DVB-HN Phase 1. It supports features like: • connecting DVB HN devices to the home network allowing them to receive existing DVB services; • detecting other DVB Home Network devices on the home network; • detecting capabilities of other DVB Home Network devices on the home network; • advertising of DVB content to other DVB HN devices on the home network: - that is available on the Access Network; - that is stored on a DVB Home Network device on the home network; • streaming DVB content: - from the Access Network over the home network to a DVB Home Network device; - from a DVB Home Network device over the home network to another DVB Home Network device.
|
102 905
|
Digital Video Broadcasting (DVB); Technical Specification for DVB Services in the Home Network Phase 1
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/102905/01.01.01_60/ts_102905v010101p.pdf
|
The present document covers a subset of the use cases from the DVB Home Network commercial requirements (TM3422) and described in ETSI TS 102 905 (V1.1.1) [3]; it is therefore called DVB-HN Phase 1. It supports features like: • connecting DVB HN devices to the home network allowing them to receive existing DVB services; • detecting other DVB Home Network devices on the home network; • detecting capabilities of other DVB Home Network devices on the home network; • advertising of DVB content to other DVB HN devices on the home network: - that is available on the Access Network; - that is stored on a DVB Home Network device on the home network; • streaming DVB content: - from the Access Network over the home network to a DVB Home Network device; - from a DVB Home Network device over the home network to another DVB Home Network device.
|
102 917-2
|
Intelligent Transport Systems (ITS); Test specifications for the channel congestion control algorithms operating in the 5,9 GHz range; Part 2: Test Suite Structure and Test Purposes (TSS & TP)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/10291702/01.01.01_60/ts_10291702v010101p.pdf
|
The present document provides the Test Suite Structure and Test Purposes (TSS & TP) for the test specifications for the channel congestion control algorithms operating in the 5,9 GHz range as specified in TS 102 687 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [7] and ETS 300 406 [8]. In the present document only the ITS-G5A and ITS-G5B channels are covered.
|
102 928
|
Speech and multimedia Transmission Quality (STQ); End-to-End Transmission Planning Requirements for Real Time Services in an NGN context
|
TS
|
1.1.3
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/102928/01.01.03_60/ts_102928v010103p.pdf
|
The present document provides requirements on the quality parameters that need to be considered at the Segment-connection of Voice over IP (VoIP) services, voice band data (VBD) and conversational video service services in an IP Multimedia Core Network Subsystem. The present document provides requirements on objectives for voice and data parameters.
|
102 901
|
IMS Network Testing (INT); IMS NNI Interoperability Test Specifications IMS NNI interoperability test descriptions for RCS
|
TS
|
4.1.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/102901/04.01.01_60/ts_102901v040101p.pdf
|
The present document specifies interoperability Test Descriptions (TDs) for Inter-IMS Network to Network Interface (II-NNI) interoperability testing for the Rich Communication Suite (RCS) related services based on RCS-e Advanced Communications Services and Client Specification [11]. The Stage 3 Session Initiation Protocol (SIP) and Session Description Protocol (SDP) standard, TS 124 229 [1] and Inter-IMS Network to Network Interface, TS 129 165 [7] define the functionalities on which the RCS services are based. TDs have been specified on the basis of the Test Purposes (TPs) and Test Suite Structure (TSS) presented in TS 186 011-1 [2]. TP fragments presented in the present document as part of TDs are defined using the TPLan notation of ES 202 553 [5]. TDs have been written based on the test specification framework described in TS 102 351 [3] and the interoperability testing methodology defined in TS 102 237-1 [4], i.e. interoperability testing with a conformance relation. NOTE: Requirements pertaining to a UE or an AS implementation or IMS core network requirements that can only be observed at the interface between UE and IMS CN are explicitly not within the scope of the present document. The latter requirements have been dealt with from a UE and conformance perspective in TS 134 229-1 [6].
|
102 891-3
|
IMS Network Testing (INT); Message Waiting Indication (MWI) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance Testing; Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification
|
TS
|
3.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10289103/03.01.01_60/ts_10289103v030101p.pdf
|
The present document specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma based on the Test Suite Structure and Test Purposes defined in TS 102 891-2 [2]. The test notation used in the ATS is TTCN-3 (see ES 201 873-1 [7]). The following test specification- and design considerations can be found in the body of the present document: • the overall test suite structure; • the testing architecture; • the test methods and port definitions; • the test configurations; • the design principles, assumptions, and used interfaces to the TTCN3 tester (System Simulator); • TTCN styles and conventions; • the partial PIXIT proforma; • the modules containing the TTCN-3 ATS. Annex A provides the Partial Implementation Extra Information for Testing (PIXIT) Proforma of the ATS. Annex B provides the Testing and Test Control Notation (TTCN-3) part of the ATS.
|
102 891-2
|
Technical Committee for IMS Network Testing (INT); Message Waiting Indication (MWI) using IP Multimedia (IM) Core Network (CN) subsystem; Part 2: Test Suite Structure and Test Purposes (TSS&TP)
|
TS
|
3.2.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10289102/03.02.01_60/ts_10289102v030201p.pdf
|
The present document specifies the Test Suite Structure and Test Purposes (TSS&TP) of the Message Waiting Indication (MWI) service, based on 3GPP stage three Protocol Description of the (MWI) service, based on stage one and two of the ISDN MWI supplementary services.
|
102 891-1
|
Technical Committee for IMS Network Testing (INT); Message Waiting Indication (MWI) using IP Multimedia (IM) Core Network (CN) subsystem; Part 1: Protocol Implementation Conformance Statement (PICS)
|
TS
|
3.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10289101/03.01.01_60/ts_10289101v030101p.pdf
|
The present document specifies the Protocol Implementation Conformance Statement of the Message Waiting Indication (MWI) service, based on 3GPP stage three Protocol Description of the Message Waiting Indication (MWI) service, based on stage one and two of the ISDN MWI supplementary services.
|
102 890-1
|
<empty>
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10289001/01.01.01_60/ts_10289001v010101p.pdf
|
The present document provides the specification of the Services Announcement (SA) service, including its protocol functions, based on ISO/TS 16460 [1]. The definition of the interface between Service Provider and Service Announcer ITS stations (ITS-S) as well as of the communication steps following the service announcement protocol procedure and related protocol details between Service Announcer and Service User ITS-S are application-specific are not covered by the present document.
|
102 887-2
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Smart Metering Wireless Access Protocol; Part 2: Data Link Layer (MAC Sub-layer)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10288702/01.01.01_60/ts_10288702v010101p.pdf
|
The present document is the second part of the Smart Metering Wireless Access Protocol describing the data structures and functional operation of Smart Metering and other applications intending to use spectrum resources covered by TS 102 887-1 [1] Physical Layer. TS 102 887-1 [1] is derived from IEEE 802.15.4g-2012™ [5] and the present document is derived from IEEE 802 15.4-2011™ [3], IEEE 802.15.4e-2012™ [4] and ANSI/TIA-4957-200 [2] together with specific enhancements or adaptations for the European context.
|
102 874-2
|
Access, Terminals, Transmission and Multiplexing (ATTM); External Common Power Supply for Customer Premises Network and Access Equipment; Part 2: Integrated Broadband Cable and Television Networks
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10287402/01.01.01_60/ts_10287402v010101p.pdf
|
The present document describes the specification for a high performance External Power Supply Unit for powering the Cable Customer Premises Equipment to a maximum voltage rating of 12 Vdc. The specifications define the input, output characteristics and performance requirements for a switching mode AC to DC power supply rated to a maximum 12 Vdc, and maximum 1 A. The present document also specifies tests to verify the compliance of the external power supply.
|
102 883
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra Wide Band (UWB); Measurement Techniques
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102883/01.01.01_60/ts_102883v010101p.pdf
|
The present document summarize the available information of possible measurement techniques and procedures for the conformance measurement of various UWB signal formats in order to comply with the given transmission limits given in the actual regulation. The present document will be used as a reference for existing and future ETSI standards covering UWB technologies.
|
102 879
|
Access, Terminals, Transmission and Multiplexing (ATTM); IPCablecom Services for delivering multimedia and voice over DOCSIS network infrastructure
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102879/01.01.01_60/ts_102879v010101p.pdf
|
The present document specifies IPCablecom, (also referred to as PacketCable) multimedia services over DOCSIS.
|
102 901
|
IMS Network Testing (INT); IMS NNI Interoperability Test Specifications; IMS NNI interoperability test descriptions for RCS
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/102901/02.01.01_60/ts_102901v020101p.pdf
|
The present document specifies interoperability Test Descriptions (TDs) for Inter-IMS Network to Network Interface (II-NNI) interoperability testing for the Rich Communication Suite (RCS) related services based on RCS-e Advanced Communications Services and Client Specification [11]. The Stage 3 Session Initiation Protocol (SIP) and Session Description Protocol (SDP) standard, TS 124 229 [1] and Inter-IMS Network to Network Interface, TS 129 165 [7] define the functionalities on which the RCS services are based. TDs have been specified on the basis of the Test Purposes (TPs) and Test Suite Structure (TSS) presented in TS 186 011-1 [2]. TP fragments presented in the present document as part of TDs are defined using the TPLan notation of ES 202 553 [5]. TDs have been written based on the test specification framework described in TS 102 351 [3] and the interoperability testing methodology defined in TS 102 237-1 [4], i.e. interoperability testing with a conformance relation. NOTE: Requirements pertaining to a UE or an AS implementation or IMS core network requirements that can only be observed at the interface between UE and IMS CN are explicitly not within the scope of the present document. The latter requirements have been dealt with from a UE and conformance perspective in TS 134 229-1 [6].
|
102 871-2
|
Intelligent Transport Systems (ITS); Testing; Conformance test specifications for GeoNetworking; Part 2: Test Suite Structure and Test Purposes (TSS & TP)
|
TS
|
1.5.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10287102/01.05.01_60/ts_10287102v010501p.pdf
|
The present document provides the Test Suite Structure and Test Purposes (TSS & TP) for ITS GeoNetworking as defined in ETSI EN 302 636-4-1 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [i.4]. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [i.2] and ISO/IEC 9646-2 [i.3]) as well as the ETSI rules for conformance testing (ETSI ETS 300 406 [i.5]) are used as a basis for the test methodology.
|
102 900
|
Emergency Communications (EMTEL); European Public Warning System (EU-ALERT) using the Cell Broadcast Service
|
TS
|
1.4.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/102900/01.04.01_60/ts_102900v010401p.pdf
|
The present document defines the system requirements for a European Public Warning Service using the Cell Broadcast Service, defined in ETSI TS 123 041 [1], as a means of message distribution and delivery to User Equipment (UE).
|
102 894-2
|
<empty>
|
TS
|
2.3.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10289402/02.03.01_60/ts_10289402v020301p.pdf
|
The present document specifies the syntax and semantics of data objects in the field of Intelligent Transport Systems (ITS). It represents a dictionary of common data objects that can be used to define applications and facilities layer Protocol Data Unit and Service Data Unit in ETSI TC ITS Release 2 documents. The present document does not specify the syntax and semantics of data elements in the specific context of any message. Such syntax and semantics are specified in the corresponding message standards.
|
102 894-2
|
Intelligent Transport Systems (ITS); Users and applications requirements; Part 2: Applications and facilities layer common data dictionary
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10289402/01.03.01_60/ts_10289402v010301p.pdf
|
The present document specifies the syntax and semantics of data objects in the field of Intelligent Transport Systems (ITS). It represents a dictionary of common data objects that can be used to define applications and facilities layer Protocol Data Unit and Service Data Unit in ETSI TC ITS Release 2 documents. The present document does not specify the syntax and semantics of data elements in the specific context of any message. Such syntax and semantics are specified in the corresponding message standards.
|
102 887-1
|
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Smart Metering Wireless Access Protocol; Part 1: PHY layer
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10288701/01.01.01_60/ts_10288701v010101p.pdf
|
The present document provides adaptations to IEEE Std 802.15.4g-2012 [2] in order to comply with the European regulations for Short Range Devices (SRDs).
|
102 894-1
|
Intelligent Transport Systems (ITS); Users and applications requirements; Part 1: Facility layer structure, functional requirements and specifications
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10289401/01.01.01_60/ts_10289401v010101p.pdf
|
The present document is the baseline for the definition of the Release 2 functional architecture for the facilities layer of the ITS station.
|
102 871-3
|
Intelligent Transport Systems (ITS); Testing; Conformance test specifications for GeoNetworking; Part 3: Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT)
|
TS
|
1.5.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10287103/01.05.01_60/ts_10287103v010501p.pdf
|
The present document contains the Abstract Test Suite (ATS) for ITS GeoNetworking as defined in ETSI EN 302 636-4-1 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [i.6]. The objective of the present document is to provide a basis for conformance tests for ITS GeoNetworking equipment giving a high probability of interoperability between different manufacturers' equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [i.3] and ISO/IEC 9646-2 [i.4]) as well as the ETSI rules for conformance testing (ETSI ETS 300 406 [i.7]) are used as a basis for the test methodology.
|
102 874-5
|
Access, Terminals, Transmission and Multiplexing (ATTM); External Common Power Supply for Customer Premises Network and Access Equipment; Part 5: CPS Type 2.c implementation details
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10287405/01.02.01_60/ts_10287405v010201p.pdf
|
The present document describes the specification for a high performance External Power Supply Unit for powering the Customer Premises Equipment to a maximum voltage rating of 12 V dc. The specifications define the input, output characteristics and performance requirements for a switching mode AC to DC CPS rated to a maximum 12 V dc, and maximum 5 A. The present document also specifies tests to verify the compliance of the external CPS. Disclaimer: The present document does not guarantee compliance to legal directives or regulations. Details about these aspects can be found on the following links: • http://ec.europa.eu/enterprise/sectors/electrical/index_en.htm • http://ec.europa.eu/enterprise/sectors/electrical/documents/lvd/standardisation/index_en.htm • http://ec.europa.eu/enterprise/sectors/electrical/documents/emc/standardisation/index_en.htm NOTE: Examples of documents to be considered are CE Marking 93/68/EEC [13], LVD Low Voltage Directive 2006/95/EC [12], EMC Directive 2004/108/EC [14]; for Ecodesign aspects: RoHS (Restriction of Hazardous Substances) European Directive 2011/65/EC [8] 8 June 2011 and WEEE Management Regulations (Waste Electrical and Electronic Equipment) European Directives 2002/96/EC 27 January 2003 and amendments [9].
|
102 868-3
|
Intelligent Transport Systems (ITS); Testing; Conformance test specifications for Cooperative Awareness Basic Service (CA); Part 3: Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT)
|
TS
|
1.5.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10286803/01.05.01_60/ts_10286803v010501p.pdf
|
The present document contains the Abstract Test Suite (ATS) for Cooperative Awareness Basic Service (CA) as defined in ETSI TS 103 900 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [i.7]. The objective of the present document is to provide a basis for conformance tests for Cooperative Awareness Basic Service (CA) equipment giving a high probability of interoperability between different manufacturers' equipment. The ISO standards for the methodology of conformance testing (ISO/IEC 9646-1 [i.4] and ISO/IEC 9646-2 [i.5]) as well as the ETSI rules for conformance testing (ETSI ETS 300 406 [i.8]) are used as a basis for the test methodology.
|
102 901
|
IMS Network Testing (INT); IMS NNI Interoperability Test Specifications; IMS NNI interoperability test descriptions for RCS
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102900_102999/102901/01.01.01_60/ts_102901v010101p.pdf
|
The present document specifies interoperability Test Descriptions (TDs) for Inter-IMS Network to Network Interface (II-NNI) interoperability testing for the Rich Communication Suite (RCS) related services based on RCS-e Advanced Communications Services and Client Specification [11]. The Stage 3 Session Initiation Protocol (SIP) and Session Description Protocol (SDP) standard, TS 124 229 [1] and Inter-IMS Network to Network Interface, TS 129 165 [7] define the functionalities on which the RCS services are based. TDs have been specified on the basis of the Test Purposes (TPs) and Test Suite Structure (TSS) presented in TS 186 011-1 [2]. TP fragments presented in the present document as part of TDs are defined using the TPLan notation of ES 202 553 [5]. TDs have been written based on the test specification framework described in TS 102 351 [3] and the interoperability testing methodology defined in TS 102 237-1 [4], i.e. interoperability testing with a conformance relation. NOTE: Requirements pertaining to a UE or an AS implementation or IMS core network requirements that can only be observed at the interface between UE and IMS CN are explicitly not within the scope of the present document. The latter requirements have been dealt with from a UE and conformance perspective in TS 134 229-1 [6].
|
102 874-3
|
Access, Terminals, Transmission and Multiplexing (ATTM); External Common Power Supply for Customer Premises Network and Access Equipment; Part 3: CPS Type 1 implementation details
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10287403/01.02.01_60/ts_10287403v010201p.pdf
|
The present document describes the specification for a high performance External Power Supply Unit for powering the Customer Premises Equipment to a maximum voltage rating of 5 V dc. The specifications define the input, output characteristics and performance requirements for a switching mode AC to DC CPS rated to a maximum 5 V dc and maximum 2 A. The present document also specifies tests to verify the compliance of the external CPS. Disclaimer: The present document does not guarantee compliance to legal directives or regulations. Details about these aspects can be found on the following links: • http://ec.europa.eu/enterprise/sectors/electrical/index_en.htm • http://ec.europa.eu/enterprise/sectors/electrical/documents/lvd/standardisation/index_en.htm • http://ec.europa.eu/enterprise/sectors/electrical/documents/emc/standardisation/index_en.htm NOTE: Examples of documents to be considered are CE Marking 93/68/EEC [13] , LVD Low Voltage Directive 2006/95/EC [12], EMC Directive 2004/108/EC [14]; for Ecodesign aspects: RoHS (Restriction of Hazardous Substances) European Directive 2011/65/EC [8] 8 June 2011 and WEEE Management Regulations (Waste Electrical and Electronic Equipment) European Directives 2002/96/EC 27 January 2003 and amendments [9].
|
102 894-1
|
Intelligent Transport Systems (ITS); Users and applications requirements; Part 1: Facility layer structure, functional requirements and specifications; Release 2
|
TS
|
2.0.0
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10289401/02.00.00_60/ts_10289401v020000p.pdf
|
The present document is the baseline for the definition of the Release 2 functional architecture for the facilities layer of the ITS station.
|
102 873
|
Access, Terminals, Transmission and Multiplexing (ATTM); Optical External Network Test Interface
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102873/01.02.01_60/ts_102873v010201p.pdf
|
The present document defines the functional and technical characteristics applicable to the Optical External Network Test Interface (ENTI) terminated with Singlemode fibre which provides testing capability at the demarcation point between the line of the FTTH operator's network and the customer's cabling inside the house. The present document describes optical ENTI for new homes in coherence with the definition used in EN 50700 [34]. An optical ENTI is positioned in a distribution space. It is connected to an ONT by an optical terminated cord. The home cabling is not considered in the present document. The present document specifies the functional characteristics and performance requirements for the optical ENTI within the subscriber premises and for the needs of the FTTH optical access network.
|
102 872
|
Access, Terminals, Transmission and Multiplexing (ATTM); Copper External Network Testing Interface
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102872/01.01.01_60/ts_102872v010101p.pdf
|
The present document specifies rules to the copper RJ45 ENTI in the case of copper access network.
|
102 869-1
|
Intelligent Transport Systems (ITS); Testing; Conformance test specifications for Decentralized Environmental Notification Basic Service (DEN); Part 1: Test requirements and Protocol Implementation Conformance Statement (PICS) pro forma
|
TS
|
1.6.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10286901/01.06.01_60/ts_10286901v010601p.pdf
|
The present document provides the Protocol Implementation Conformance Statement (PICS) pro forma for Conformance test specification for Decentralized Environmental Notification Basic Service (DEN) as defined in ETSI EN 302 637-3 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [i.2].
|
102 868-3
|
Intelligent Transport Systems (ITS); Testing; Conformance test specifications for Cooperative Awareness Basic Service (CA); Part 3: Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT); Release 2
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10286803/02.01.01_60/ts_10286803v020101p.pdf
|
The present document contains the Abstract Test Suite (ATS) for Cooperative Awareness Basic Service (CA) as defined in ETSI TS 103 900 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [i.7]. The objective of the present document is to provide a basis for conformance tests for Cooperative Awareness Basic Service (CA) equipment giving a high probability of interoperability between different manufacturers' equipment. The ISO standards for the methodology of conformance testing (ISO/IEC 9646-1 [i.4] and ISO/IEC 9646-2 [i.5]) as well as the ETSI rules for conformance testing (ETSI ETS 300 406 [i.8]) are used as a basis for the test methodology.
|
102 874-4
|
Access, Terminals, Transmission and Multiplexing (ATTM); External Common Power Supply for Customer Premises Network and Access Equipment; Part 4: CPS Type 2.b implementation details
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10287404/01.02.01_60/ts_10287404v010201p.pdf
|
The present document describes the specification for a high performance External Power Supply Unit for powering the Customer Premises Equipment to a maximum voltage rating of 12 V dc. The specifications define the input, output characteristics and performance requirements for a switching mode AC to DC CPS rated to a maximum 12 V dc, and maximum 2 A. The present document also specifies tests to verify the compliance of the external CPS. Disclaimer: The present document does not guarantee compliance to legal directives or regulations. Details about these aspects can be found on the following links: • http://ec.europa.eu/enterprise/sectors/electrical/index_en.htm; • http://ec.europa.eu/enterprise/sectors/electrical/documents/lvd/standardisation/index_en.htm; • http://ec.europa.eu/enterprise/sectors/electrical/documents/emc/standardisation/index_en.htm. NOTE: Examples of documents to be considered are CE Marking 93/68/EEC [13], LVD Low Voltage Directive 2006/95/EC [12], EMC Directive 2004/108/EC [14]; for Ecodesign aspects: RoHS (Restriction of Hazardous Substances) European Directive 2011/65/EC [8] 8th June 2011 and WEEE Management Regulations (Waste Electrical and Electronic Equipment) European Directives 2002/96/EC 27th January 2003 and amendments [9].
|
102 870-3
|
Intelligent Transport Systems (ITS); Testing; Conformance test specifications for Geonetworking Basic Transport Protocol (BTP); Part 3: Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT)
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10287003/01.02.01_60/ts_10287003v010201p.pdf
|
The present document contains the Abstract Test Suite (ATS) for Geonetworking Basic Transport Protocol (BTP) as defined in ETSI EN 302 636-5-1 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [i.5]. The objective of the present document is to provide a basis for conformance tests for Geonetworking Basic Transport Protocol (BTP) equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [i.2] and ISO/IEC 9646-2 [i.3]) as well as the ETSI rules for conformance testing (ETSI ETS 300 406 [i.6]) are used as a basis for the test methodology.
|
102 870-2
|
Intelligent Transport Systems (ITS); Testing; Conformance test specifications for GeoNetworking Basic Transport Protocol (BTP); Part 2: Test Suite Structure and Test Purposes (TSS&TP)
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10287002/01.02.01_60/ts_10287002v010201p.pdf
|
The present document provides the Test Suite Structure and Test Purposes (TSS&TP) for Geonetworking Basic Transport Protocol (BTP) as defined in ETSI EN 302 636-5-1 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [i.5]. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [i.2] and ISO/IEC 9646-2 [i.3]) as well as the ETSI rules for conformance testing (ETSI ETS 300 406 [i.6]) are used as a basis for the test methodology.
|
102 868-2
|
Intelligent Transport Systems (ITS); Testing; Conformance test specifications for Cooperative Awareness Basic Service (CA); Part 2: Test Suite Structure and Test Purposes (TSS & TP)
|
TS
|
1.5.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10286802/01.05.01_60/ts_10286802v010501p.pdf
|
The present document provides the Test Suite Structure and Test Purposes (TSS & TP) for Cooperative Awareness Basic Service (CA) as defined in ETSI TS 103 900 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [i.4]. The ISO standards for the methodology of conformance testing (ISO/IEC 9646-1 [i.2] and ISO/IEC 9646-2 [i.3]) as well as the ETSI rules for conformance testing (ETSI ETS 300 406 [i.5]) are used as a basis for the test methodology.
|
102 868-1
|
Intelligent Transport Systems (ITS); Testing; Conformance test specifications for Cooperative Awareness Basic Service (CA); Part 1: Test requirements and Protocol Implementation Conformance Statement (PICS) pro forma; Release 2
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10286801/02.01.01_60/ts_10286801v020101p.pdf
|
The present document provides the Protocol Implementation Conformance Statement (PICS) pro forma for Conformance test specification for Cooperative Awareness Basic Service (CA) as defined in ETSI TS 103 900 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [i.2].
|
102 868-1
|
Intelligent Transport Systems (ITS); Testing; Conformance test specifications for Cooperative Awareness Basic Service (CA); Part 1: Test requirements and Protocol Implementation Conformance Statement (PICS) pro forma
|
TS
|
1.5.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10286801/01.05.01_60/ts_10286801v010501p.pdf
|
The present document provides the Protocol Implementation Conformance Statement (PICS) pro forma for Conformance test specification for Cooperative Awareness Basic Service (CA) as defined in ETSI TS 103 900 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [i.2].
|
102 855
|
Satellite Earth Stations and Systems (SES); Broadband Satellite Multimedia (BSM); Interworking and Integration of BSM in Next Generation Networks (NGNs)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102855/01.01.01_60/ts_102855v010101p.pdf
|
The integration and interoperability of BSM networks with the NGN is specified in terms of the functional architecture and associated functions and interfaces. The present document is based on and uses TISPAN (release 2) definitions and terminology (since TISPAN release 3 is not yet fully specified).
|
102 860
|
Intelligent Transport Systems (ITS); Classification and management of ITS application objects
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102860/01.01.01_60/ts_102860v010101p.pdf
|
The present document provides: • the technical specification of the globally applicable identifier of ITS application objects, referred to as "ITS Application ID" (ITS-AID); • requirements and specifications related to operational needs of ITS stations applying ITS-AID in protocol data units; • specification of technical elements used for registration of ITS application objects; • recommendations for the procedural framework for registration and certification of ITS application objects; • recommendations for the procedural framework and operational needs related to installation and maintenance of ITS application objects in instances of ITS stations.
|
102 859-3
|
Intelligent Transport Systems (ITS); Testing; Conformance test specifications for Transmission of IP packets over GeoNetworking; Part 3: Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT)
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10285903/01.03.01_60/ts_10285903v010301p.pdf
|
The present document contains the Abstract Test Suite (ATS) for Transmission of IP packets over GeoNetworking as defined in ETSI EN 302 636-6-1 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [i.5] . The objective of the present document is to provide a basis for conformance tests for Transmission of IP packets over GeoNetworking equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [i.2] and ISO/IEC 9646-2 [i.3]) as well as the ETSI rules for conformance testing (ETSI ETS 300 406 [i.6]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of the ATS. Annex B provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Pro forma of the ATS. Annex C provides the Protocol Conformance Test Report (PCTR) Pro forma of the ATS.
|
102 859-2
|
Intelligent Transport Systems (ITS); Testing; Conformance test specifications for Transmission of IP packets over GeoNetworking; Part 2: Test Suite Structure and Test Purposes (TSS & TP)
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10285902/01.03.01_60/ts_10285902v010301p.pdf
|
The present document provides the Test Suite Structure and Test Purposes (TSS&TP) for Transmission of IP packets over GeoNetworking as defined in ETSI EN 302 636-6-1 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [i.4]. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [i.2] and ISO/IEC 9646-2 [i.3]) as well as the ETSI rules for conformance testing (ETSI ETS 300 406 [i.5]) are used as a basis for the test methodology.
|
102 859-1
|
Intelligent Transport Systems (ITS); Testing; Conformance test specifications for Transmission of IP packets over GeoNetworking; Part 1: Test requirements and Protocol Implementation Conformance Statement (PICS) pro forma
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10285901/01.03.01_60/ts_10285901v010301p.pdf
|
The present document provides the Protocol Implementation Conformance Statement (PICS) pro forma for Conformance test specifications for Geonetworking Basic Transport Protocol as defined in ETSI EN 302 636-6-1 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [i.2].
|
102 870-1
|
Intelligent Transport Systems (ITS); Testing; Conformance test specifications for GeoNetworking Basic Transport Protocol (BTP); Part 1: Test requirements and Protocol Implementation Conformance Statement (PICS) pro forma
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10287001/01.02.01_60/ts_10287001v010201p.pdf
|
The present document provides the Protocol Implementation Conformance Statement (PICS) pro forma for Conformance test specifications for Geonetworking Basic Transport Protocol as defined in ETSI EN 302 636-5-1 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [i.2]. The supplier of an implementation which is claimed to conform to ETSI EN 302 636-5-1 [1] is required to complete a copy of the PICS pro forma provided in the annex A of the present document.
|
102 869-3
|
Intelligent Transport Systems (ITS); Testing; Conformance test specifications for Decentralized Environmental Notification Basic Service (DEN); Part 3: Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT)
|
TS
|
1.6.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10286903/01.06.01_60/ts_10286903v010601p.pdf
|
The present document contains the Abstract Test Suite (ATS) for Decentralized Environmental Notification Basic Service (DEN) as defined in ETSI EN 302 637-3 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [i.7]. The objective of the present document is to provide a basis for conformance tests for Decentralized Environmental Notification Basic Service (DEN) equipment giving a high probability of interoperability between different manufacturers' equipment. The ISO standards for the methodology of conformance testing (ISO/IEC 9646-1 [i.4] and ISO/IEC 9646-2 [i.5]) as well as the ETSI rules for conformance testing (ETSI ETS 300 406 [i.8]) are used as a basis for the test methodology.
|
102 869-2
|
Intelligent Transport Systems (ITS); Testing; Conformance test specifications for Decentralized Environmental Notification Basic Service (DEN); Part 2: Test Suite Structure and Test Purposes (TSS & TP)
|
TS
|
1.6.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10286902/01.06.01_60/ts_10286902v010601p.pdf
|
The present document provides the Test Suite Structure and Test Purposes (TSS & TP) for Decentralized Environmental Notification Basic Service (DEN) as defined in ETSI EN 302 637-3 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [i.5]. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [i.2] and ISO/IEC 9646-2 [i.3]) as well as the ETSI rules for conformance testing (ETSI ETS 300 406 [i.6]) are used as a basis for the test methodology.
|
102 852
|
User Group; Quality of ICT Services; Assessment process of the QoS parameters of the customer relationship stages
|
TS
|
1.1.2
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102852/01.01.02_60/ts_102852v010102p.pdf
|
The present document defines a common set of test sequences that are applicable by any stakeholder in order to provide results that are objective, reproducible and comparable. It details - in a generic way - the assessment sequences for the 4 types of parameters: Time, Percentage, Number and Opinion Ratings as given in EG 202 843 [i.1]. The present document also provides examples of a set of dedicated assessment sequences for parameters of selected stages of the customer relationship course (QoS Assessment process).
|
102 866
|
Integrated Broadband Cable Telecommunication Networks (CABLE); Cable Equipment Operations within its Frequency Band
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102866/01.01.01_60/ts_102866v010101p.pdf
|
The present document defines the transmitted signal characteristcis delivered across a HFC cable network to the customer network interfaces distributed within the home network received and processed by the consumer end terminals for reception of multimedia services. The signal characteristics are defined across the operating frequency and in accordance with network equipment built to European standards. The present document provides valuable input to engineers and developers containing the technical basis to take into account when developing harmonized technical conditions for new radio services operating in the same frequency range as currently occupied by cable distribution networks. It presents the technical basis for coexistence between these new radio services and existing non-radio end-user equipment for fixed broadcasting and broadband electronic communication services, specifically those services delivered by European cable based systems (PAL/SECAM, DVB-C, Euro-DOCSIS). The impact to non-radio end user equipment for fixed broadcast and broadband electronic communication services is given in terms of the operational characteristics of the wanted signals and tolerable limits of the unwanted signals as a factor of the distance between them before the unwanted interfering signal will disrupt the end users equipment for fixed broadcasting and broadband electronic communication services (e.g. digital and analogue television, internet high speed data and telephony services).
|
102 846
|
User Group; Quality of ICT Services; Requirements for Bodies Providing Conformity Assessment of Checking-up on Metering and Billing Processes
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102846/01.01.01_60/ts_102846v010101p.pdf
|
The present document details the specific requirements an independent party should comply with, in addition to the generic standard ISO/IEC 17065 [2] to assess conformity of the checking-up on metering and billing processes with the requirements defined in TS 102 845 [1].
|
102 836-1
|
Access, Terminals, Transmission and Multiplexing (ATTM); Lawful Interception (LI); Part 1: Interception of IP Telephony Service on Cable Operator's Broadband IP Network: Internal Network Interfaces
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10283601/01.01.01_60/ts_10283601v010101p.pdf
|
The present document specifies the internal network interfaces to enable the Lawful Interception (LI) of IP telephony services over cable operators broadband IP Networks. The current document describes the LI functional elements and interfaces for both the NCS based and SIP protocol signalling architectures within a PacketCable™ network architecture framework. The present document provides the requirements for the internal cable network interfaces and there functions for those network elements within a Cable Operators network that are involved in the production of the interception of call content and call related information relating to the interception target of IP Telephony communication services. The provision of a LI interface for a Cable Operators Broadband IP Network is a national option, however where it is provided it shall be provided as described in the present document. The structure of LI in telecommunications is in two parts: The internal interface of a network that is built using a particular technology; and, the external interface (known as the Handover Interface) that links the LEA to the network. Between these two parts is described a LI Mediation Device (MD) whose functions cater for managing and provisioning the network elements for interception as well as national variances and delivery of the result of interception. The administration of LI is a function that is typically integrated within the manufactures MD but may also be a separate device. For the purpose of the current document the administration function is assumed as integrated within the MD. The subject of the present document is the internal network LI interfaces that lies between the elements of a Cable Operators IP Broadband infrastructure and the functions of the MD. The Handover Interface is out of scope of the present document. The current document assumes the delivery requirements specified by ETSI Technical Committee Lawful Intercept (TC LI), ES 201 671 [2], TS 101 671 [3] and TS 102 232 [4]. In addition the Handover Interface may be the subject of national regulation and therefore the function of the mediation device for delivery of the intercepted information to the LEA may also be a matter of national regulation. Systems that use SIP based on Packet Cable™ 2.0 is out of scope of the present document.
|
102 845
|
User Group; Quality of ICT Services; Requirements for Check-up on Metering and Billing Processes
|
TS
|
2.0.0
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102845/02.00.00_60/ts_102845v020000p.pdf
|
The present document has been prepared to provide a model for designing and operating the checking-up on metering and billing processes of Service Providers. Because the checking-up approach of the present document is end-to-end (i.e. using a "black box" approach from the actual electronic communications generation to the checking-up on their billing), it is intended that these requirements are applicable to the metering and billing of any kind of services offered by the Service Providers. The goal of the present document is to define a standardized checking process and the test methodology that could be implemented by any stakeholder and is auditable by a third-party, leading to trustworthy performance indicators about the integrity of billing issued by a Service Provider. NOTE: It is important to note that the present document does not provide any model for designing and operating the metering and billing process itself.
|
102 856-2
|
Satellite Earth Stations and Systems (SES); Broadband Satellite Multimedia (BSM); Multi-Protocol Label Switching (MPLS) interworking over satellite; Part 2: Negotiation and management of MPLS labels and MPLS signalling with attached networks
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10285602/01.01.01_60/ts_10285602v010101p.pdf
|
The BSM/MPLS technical specifications extend and complement the existing BSM functional architecture ([1] to [3]) and the SI-SAP interface [4] to enable transport of MPLS signalling and data flows over a BSM network, in a way such that MPLS networks connected by different STs can communicate as if they were connected by standard terrestrial LSRs (label switched routers). In this general scope, TS 102 856-1 [13] clarifies the main architectural issues, including operational scenarios and protocol stacks, and discusses how BSM-compliant STs can be designed and configured to address MPLS-specific tasks. The present document, clarifies the signalling issues related to the use of MPLS in BSM systems, with a particular focus on the case when the LSR is completely integrated in an ST; in this case the ST still acts in a BSM-compliant manner over the satellite, but it also behaves as a classical LSR on its terrestrial interface to external networks. The setup of multicast MPLS paths is considered out of scope.
|
102 835
|
Smart Cards; Test Specification for SCWS Application Invocation API for Java CardTM; Tests Environment and Annexes (Release 7)
|
TS
|
7.2.0
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102835/07.02.00_60/ts_102835v070200p.pdf
|
The present document covers the minimum characteristics considered necessary in order to provide compliance to TS 102 588 [2]. It describes the technical characteristics and methods for testing the SCWS API for Java CardTM (TS 102 588 [2]) implemented in a UICC platform. It specifies the following parts: • test applicability; • test environment description; • tests format; • test area reference; • conformance requirements; • test suite files; • test procedure; • test coverage; and • a description of the associated testing tools that shall be used.
|
102 833
|
Digital Video Broadcasting (DVB); File Format Specification for the Storage and Playback of DVB Services
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102833/01.02.01_60/ts_102833v010201p.pdf
|
The present document specifies the File Format used to store and playback DVB services. The audio/video properties of the services that may be contained in this format are defined by specifications TS 101 154 [3] for MPEG-2 Systems services, and TS 102 005 [4] for RTP carried elementary stream services. The present document also specifies the storage of a range of additional data relevant to the services. This includes: • specification TS 102 825 [14] when used to protect MPEG-2 Systems services; • TV-Anytime Related metadata, as defined by TS 102 471 [7], TS 102 323 [5] and TS 102 539 [10]; • any data that is carried with a transport stream as part of the service; and • 3GPP Timed Text [16]. Through the defined brands, the present document provides definitions of what may be contained in the file. However, the specification does not preclude any extensions from also being present, provided they do not conflict with the requirements of the present document. The present document does not require that the File Format be used internally by a device, and as such the specification can be viewed as an interoperability point. The use of the File Format is outside the scope of the present document.
|
102 842
|
VHF air-ground and air-air Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for aeronautical mobile (airborne) equipment
|
TS
|
1.2.3
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102842/01.02.03_60/ts_102842v010203p.pdf
|
The present document applies to the following radio equipment types: • Very High Frequency (VHF) Digital Link (VDL) Mode 4 aeronautical mobile (airborne) radio transmitters, transceivers and receivers for air-ground and air-air communications operating in the VHF band, using Gaussian Filtered Frequency Shift Keying (GFSK) modulation with 25 kHz channel spacing and capable of tuning to any of the 25 kHz channels from 118,000 MHz to 136,975 MHz as defined in ICAO VDL SARPs [2]. The present document provides part 5 of the technical specifications. The present document is designed to ensure that equipment certified to it will be compatible with the relevant ICAO VHF Digital Link (VDL) Standards and Recommended Practices (SARPs) [2] and VDL Mode 4 Technical Manual (TM) [1]. Manufacturers should note that in future the tuning range for the transmitter may also cover any 25 kHz channel from 112,000 MHz to 117,975 MHz and the receiver(s) may cover any 25 kHz channel from 108,000 MHz to 117,975 MHz. The present document applies to "aeronautical mobile (airborne and in some cases ground vehicles)" equipment which will hereinafter be referred to as "mobile" equipment. The present document does not give a presumption of conformity related to maintenance requirements, safety, civil/military coordination or environmental constraints. NOTE: For these ERs, please refer to the Air Navigation Service Provider (ANSP) procedures. The scope of the present document is limited to mobile stations. The equivalent technical specification for ground stations is EN 301 842-1 [i.5], EN 301 842-2 [i.6], EN 301 842-3 [i.7], EN 301 842-4 [i.8] and TS 101 535 [i.9]. The VDL Mode 4 system provides digital communication exchanges between aircraft and ground-based systems and other aircraft supporting surveillance and communication applications. The supported modes of communication include: • broadcast and point-to-point communication; • broadcast services including Automatic Dependent Surveillance - Broadcast (ADS-B), Traffic Information Service - Broadcast (TIS-B) and Flight Information Service - Broadcast (FIS-B) capabilities; • air-air and ground-air services; • operation without ground infrastructure. The present document is derived from the specifications: • VDL Mode 4 standards produced under the auspices of the International Civil Aviation Organization (ICAO) [1] and [2]; • Other relevant standards as defined in clause 2. It is envisaged that manufacturers may provide equipment supporting: • broadcast services only; • point-to-point services only; • both broadcast and point-to-point services. The present document includes: • clause 2 provides references to relevant documents; • clause 3 provides general definitions, abbreviations and symbols used; ETSI ETSI TS 102 842 V1.2.3 (2011-11) 6 • clause 4 refers to a general description and architecture of VDL Mode 4 contained in EN 302 842-2 [4]; • clause 5 provides tables tracing technical requirements specifications applicable to the interoperability Regulation [i.3]; • annex A provides a Bibliography; • a document history. Mandating and recommendation phrases a) "Shall" The use of the word "Shall" indicates a mandated criterion; i.e. compliance with the particular procedure or specification is mandatory and no alternative may be applied. b) "Should" The use of the word "Should" (and phrases such as "It is recommended that...", etc.) indicate that though the procedure or criterion is regarded as the preferred option, alternative procedures, specifications or criteria may be applied, provided that the manufacturer, installer or tester can provide information or data to adequately support and justify the alternative.
|
102 831
|
Digital Video Broadcasting (DVB); Implementation guidelines for a second generation digital terrestrial television broadcasting system (DVB-T2)
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102831/01.02.01_60/ts_102831v010201p.pdf
|
The present document gives guidelines for the implementation of all aspects of the DVB-T2 end-to-end chain. This includes: • the parts of the system defined by the physical layer system specification [i.1]; • aspects of the input pre-processing, which is outside the scope of [i.1]; • the modulator interface (or T2-MI) specification; • future developments including a possible Transmitter Identification (TxID) standard. The scope includes guidance relevant to implementers of T2-gateways, modulators, transmitters, receivers and tuners; network planners or operators; and broadcasters.
|
102 836-2
|
Access, Terminals, Transmission and Multiplexing (ATTM); Lawful Interception (LI); Part 2: Interception of IP Data Service on Cable Operator's Broadband IP Network: Internal Network Interfaces
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10283602/01.01.01_60/ts_10283602v010101p.pdf
|
The present document specifies the internal network interfaces to enable the lawful interception (LI) of IP Data services over cable operators broadband IP Networks. The current document describes the LI functional elements and interfaces for both the NCS based and SIP protocol signalling architectures within a PacketCable™ network architecture framework. The present document provides the requirements for the internal cable network interfaces and there functions for those network elements within a Cable Operators network that are involved in the production of the interception of call content and call related information relating to the interception target of IP Data communication services. The provision of a (LI) interface for a Cable Operators Broadband IP Network is a national option, however where it is provided it shall be provided as described in the present document. The structure of (LI) in telecommunications is in two parts: The internal interface of a network that is built using a particular technology; and, the external interface (known as the Handover Interface) that links the LEA to the network. Between these two parts is described a LI mediation device (MD) whose functions cater for managing and provisioning the network elements for interception as well as national variances and delivery of the result of interception. The administration of LI is a function that is typically integrated within the manufactuers MD but may also be a separate device. For the purpose of the current document the administration frunction is assumed as integrated within the MD. The subject of the present document is the internal network LI interfaces that lies between the elements of a Cable Operators IP Broadband infrastructure and the functions of the MD. The Handover Interface is out of scope of the present document. The current document assumes the delivery requirements specified by ETSI Technical Committee Lawful Intercept (TC LI), ES 201 671 [2], TS 101 671 [3] and TS 102 232 [4]. In addition the Handover Interface may be the subject of national regulation and therefore the function of the mediation device for delivery of the intercepted information to the LEA may also be a matter of national regulation. The document specifies the internal interfaces for IPv4 and IPv6 networks. For systems that are used in networks that only use IPv4, the requirements specific for IPv6 are not applicable. Systems that use SIP based on Packet Cable™ 2.0 is out of scope of the present document. Systems that use PPPoE over cable networks are out-of-scope.
|
102 868-2
|
Intelligent Transport Systems (ITS); Testing; Conformance test specifications for Cooperative Awareness Basic Service (CA); Part 2: Test Suite Structure and Test Purposes (TSS & TP); Release 2
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10286802/02.01.01_60/ts_10286802v020101p.pdf
|
The present document provides the Test Suite Structure and Test Purposes (TSS & TP) for Cooperative Awareness Basic Service (CA) as defined in ETSI TS 103 900 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [i.4]. The ISO standards for the methodology of conformance testing (ISO/IEC 9646-1 [i.2] and ISO/IEC 9646-2 [i.3]) as well as the ETSI rules for conformance testing (ETSI ETS 300 406 [i.5]) are used as a basis for the test methodology.
|
102 845
|
User Group; Quality of ICT Services; Requirements for Check-up on Metering and Billing Processes
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102845/01.02.01_60/ts_102845v010201p.pdf
|
The present document has been prepared to provide a model for designing and operating the checking-up on metering and billing processes of Service Providers. Because the checking-up approach of the present document is end-to-end (i.e. using a "black box" approach from the actual electronic communications generation to the checking-up on their billing), it is intended that these requirements are applicable to the metering and billing of any kind of services offered by the Service Providers. The goal of the present document is to define a standardized checking process and the test methodology that could be implemented by any stakeholder and is auditable by a third-party, leading to trustworthy performance indicators about the integrity of billing issued by a Service Provider. NOTE: It is important to note that the present document does not provide any model for designing and operating the metering and billing process itself.
|
102 828
|
<empty>
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102828/01.01.01_60/ts_102828v010101p.pdf
|
The present document describes an XML schema for describing application constraints and resources to be used for deploying these applications on distributed and parallel infrastructures, like enterprise and scientific grids or job schedulers. The present document will help enterprises and laboratories to manage their IT software within large-scale computer and telecom infrastructures with the necessary virtualization. Its primary audience are users of grid-based applications who will need to write application descriptors so they can run them on the grid for their grid.
|
102 827
|
<empty>
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102827/01.01.01_60/ts_102827v010101p.pdf
|
The present document describes an XML schema for describing resources to be used in distributed and parallel infrastructures like enterprise and scientific grids and job schedulers. The standard will help enterprises and laboratories to manage large-scale computer and telecom infrastructures with the necessary virtualization. Its primary audience are grid system administrators who will need to write deployment descriptors for their grid.
|
102 826
|
Digital Video Broadcasting (DVB); DVB-IPTV Profiles for TS 102 034
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102826/02.01.01_60/ts_102826v020101p.pdf
|
DVB has produced a specification for the delivery of MPEG-2 TS based DVB services over IP networks, referred to as the DVB-IPTV handbook [1]. The DVB-IPTV handbook covers several types of IPTV services (e.g. Live Media Broadcast, Content on Demand, Content Download). It has become evident that every building block in the DVB-IPTV handbook is not necessarily required for the deployment of specific IPTV systems. It is however currently not possible to implement a subset of the building blocks and claim compliancy to the DVB-IPTV handbook. Therefore, the present document defines a small set of service oriented profiles in order to facilitate and maximize the stepwise deployment of IPTV services. A profile is a coherent subset of the DVB-IPTV handbook, allowing companies to claim a degree of DVB compliancy for IPTV services. Details about specific technologies referenced in the present document are described in the DVB IPTV handbook [1].
|
102 856-1
|
Satellite Earth Stations and Systems (SES); Broadband Satellite Multimedia (BSM); Multi-Protocol Label Switching (MPLS) interworking over satellite Part 1: MPLS-based Functional Architecture
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10285601/01.01.01_60/ts_10285601v010101p.pdf
|
The present technical specifications extend and complement the existing BSM QoS functional architecture to enable transport of MPLS signalling and data flows over a BSM network in a way such that MPLS networks connected by different STs can communicate as if they were connected by standard terrestrial LSRs (label switching routers). The present document forms part 1 of this multi-part deliverable. It defines the main architectural concepts, including the network architecture and protocol stacks, and outlines the key QoS, traffic engineering and resiliency provisions. Several architecture variants are defined and their main characteristics are analysed, also taking into account three different BSM network types. An Annex sketches a set of use cases that illustrate different application and configuration scenarios of the present specifications. In a separate document, TS 102 856-2 [11], the detailed procedures in BSM network entities and related signalling issues are addressed. A particular focus is placed on the fully integrated MPLS/BSM architecture as defined in the present document. The setup of multicast MPLS paths is considered out of scope of this multi-part deliverable.
|
102 851
|
Digital Video Broadcasting (DVB); Uniform Resource Identifiers (URI) for DVB Systems
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102851/01.03.01_60/ts_102851v010301p.pdf
|
The present document specifies the syntax, semantics and encoding of the Uniform Resource Identifier (URI) schemes for use with DVB systems. The following URI schemes are covered: • dvb: • exit: These URI schemes are used to refer to locations on DVB networks from both, within DVB networks and from outside of DVB networks.
|
102 825-14
|
Digital Video Broadcasting (DVB); Content Protection and Copy Management (DVB-CPCM); Part 14: CPCM Extensions
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10282514/01.01.01_60/ts_10282514v010101p.pdf
|
The present document is the specification of the Digital Video Broadcasting (DVB) Content Protection and Copy Management (CPCM) Extensions. It contains the normative specifications of each standardized Extension to CPCM.
|
102 825-10
|
Digital Video Broadcasting (DVB); Content Protection and Copy Management (DVB-CPCM); Part 10: CPCM Acquisition, Consumption and Export Mappings
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10282510/01.02.01_60/ts_10282510v010201p.pdf
|
The present document contains normative mappings between Digital Video Broadcasting (DVB) Free-To-Air Control Signalling and Content Protection and Copy Management (CPCM) Usage State Information (USI) and from CPCM to external content protection systems.
|
102 825-9
|
Digital Video Broadcasting (DVB); Content Protection and Copy Management (DVB-CPCM); Part 9: CPCM System Adaptation Layers
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10282509/01.02.01_60/ts_10282509v010201p.pdf
|
The present document contains normative specifications for the Adaptation Layers between Digital Video Broadcasting (DVB) Content Protection and Copy Management (CPCM) system and underlying technologies. CPCM Phase 1 includes the adaptation layer for content carried inside an MPEG-2 transport stream (TS) (see TS 101 154 [1]) specified in clause 4.1.
|
102 828
|
<empty>
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102828/02.01.01_60/ts_102828v020101p.pdf
|
The present document describes an XML schema for describing application constraints and resources to be used for deploying these applications on distributed and parallel infrastructures, like enterprise and scientific grids or job schedulers. The present document will help enterprises and laboratories to manage their IT software within large-scale computer and telecom infrastructures with the necessary virtualization. Its primary audience are users of grid-based applications who will need to write application descriptors so they can run them on the grid for their grid.
|
102 844
|
User Group; Quality of Telecom Services; Conformity assessment; Requirements for bodies providing QoS assessments and surveys
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102844/01.02.01_60/ts_102844v010201p.pdf
|
The present document details the specific requirements an independent body should comply with in addition to the generic standards ISO/IEC Guide 65 [2] to provide conformity assessment of the QoS assessment process of Information and Communication Technology (ICT) services to EG 202 843 [i.1] and other relevant standards listed in the present document. NOTE 1: According to TS 102 852 [1], QoS of the customer Relationship Stages other than utilization is assessed. NOTE 2: The present document may be used by any stakeholder concerned by QoS Assessment in order to be confident with the results of QoS campaigns and with the way they are carried out.
|
102 825-7
|
Digital Video Broadcasting (DVB); Content Protection and Copy Management (DVB-CPCM); Part 7: CPCM Authorized Domain Management
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10282507/01.02.01_60/ts_10282507v010201p.pdf
|
The present document specifies the Authorized Domain Management for the Digital Video Broadcasting (DVB) Content Protection and Copy Management (CPCM) system. The present document defines messages and state machines that together define the conformant behaviour of an implementation. The present document also defines a mandatory method for performing ADSE. Additionally, the present document describes a set of tools that may be used by a Compliance and Robustness C&R regime to extend the ADSE. The present document also describes APIs to other CPCM components; however these are informative only and are not required to be implemented for conformance. The hardware, software, middleware and other technologies employed are the sole choice of the implementer, governed by the requirements of the relevant (C&R) regime.
|
102 825-5
|
Digital Video Broadcasting (DVB); Content Protection and Copy Management (DVB-CPCM); Part 5: CPCM Security Toolbox
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/10282505/01.02.01_60/ts_10282505v010201p.pdf
|
The present document specifies the Security Specification for the Digital Video Broadcasting (DVB) Content Protection and Copy Management (CPCM) system.
|
102 832
|
Digital Video Broadcasting (DVB); IP Datacast over DVB-H: Notification Framework
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102832/01.02.01_60/ts_102832v010201p.pdf
|
The present document defines mechanisms for the delivery of messages which are used by the IPDC over DVB-H network to provide information about forthcoming events; such messages are referred to as Notification messages. The present document specifies the message format, transport and access mechanisms of Notification messages.
|
102 830
|
<empty>
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102830/01.01.01_60/ts_102830v010101p.pdf
|
The present document describes standard API to manage GCM components at runtime in an interoperable way. It defines component management in a standard manner to create, introspect, monitor and reconfigure components at execution. The present document will help enterprises and laboratories to use their large-scale computer and telecom infrastructures with the necessary virtualization. Its primary audience are developers of distributed software who need to specify complex applications by composing existing software components.
|
102 835
|
Smart Cards; Test Specification for SCWS Application Invocation API for Java CardTM; Tests Environment and Annexes (Release 8)
|
TS
|
8.1.0
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102835/08.01.00_60/ts_102835v080100p.pdf
|
The present document covers the minimum characteristics considered necessary in order to provide compliance to TS 102 588 [2]. It describes the technical characteristics and methods for testing the SCWS API for Java CardTM (TS 102 588 [2]) implemented in a UICC platform. It specifies the following parts: • test applicability; • test environment description; • tests format; • test area reference; • conformance requirements; • test suite files; • test procedure; • test coverage; and • a description of the associated testing tools that shall be used.
|
102 843
|
Digital Enhanced Cordless Telecommunications (DECT); New Generation DECT; Additional feature set nr.1 for extended wideband speech services; Profile Test Specification (PTS) and Test Case Library (TCL)
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/102800_102899/102843/01.02.01_60/ts_102843v010201p.pdf
|
The present document contains the Profile Test Specification (PTS) and the Test Case Library (TCL) for "New Generation DECT; Part 5: Additional feature set nr. 1 for extended wideband speech" (ETSI TS 102 527-5 [15]). The present document covers both the Portable (PT) and the Fixed (FT) Radio terminations. The present document is defined as an extension of ETSI TS 102 841 [16], so the numbering and order of figures and tables in the present document is aligned with the corresponding numbering and order of figures and tables in ETSI TS 102 841 [16].This also applies to the numbering of tables in the annexes (and especially in annex A). The Test Case Library (TCL) covers also some test cases for "DECT New Generation; Part 1; Wideband speech" (ETSI TS 102 527-1 [13]), "DECT New Generation; Part 3; Extended wideband speech" (ETSI TS 102 527-3 [14]) and for the "Generic Access Profile" (ETSI EN 300 444 [12]). This is done because such test cases are mandatory or especially relevant for New Generation DECT Part 5 (see ETSI TS 102 527-5 [15]), and are not covered by existing GAP test specifications. Due to the ascending compatibility of DECT profiles, all New Generation DECT Part 5 devices (see ETSI TS 102 527-5 [15]), are required to be also compliant with "DECT New Generation; Part 3; Extended wideband speech" (see ETSI TS 102 527-3 [14]), "DECT New Generation; Part 1; Wideband speech" (ETSI TS 102 527-1 [13]) and with the "Generic Access Profile" (GAP, ETSI EN 300 444 [12]). Annex E of the present document specifies the modifications to GAP test cases for requirements and tests that are optional in GAP test specifications (see note), but that become mandatory to support the corresponding GAP features in New Generation DECT Part 5. NOTE: The industry de-facto standard practice for ensuring the compliance to GAP [12] is the use of ETSI TBR 022 [i.4] amended by ETSI TBR 022/A1 [i.5], even although these two documents no longer have their initial regulatory significance. ETSI TBR 022 [i.4] relies on the GAP Profile Test Specification (ETSI EN 300 494 Parts 1 [i.6] to 3 [i.8]) and on the DECT Test Case Library (ETSI EN 300 497 Parts 1 [i.9] to 9 [i.17]). The GAP test suite also includes the GAP Profile Implementation Conformance Statement (PICS) (ETSI EN 300 474 Parts 1 [i.25] and 2 [i.26]) and the DECT Common Interface (CI) Profile Implementation Conformance Statement (PICS) (ETSI EN 300 476 Parts 1 [i.18] to 7 [i.24]). The objective of the present document is to provide a basis for approval tests of NG DECT Part 5 [15] equipment giving a high probability of air interface inter-operability between different manufacturer's DECT equipment.
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.