id
stringlengths 7
13
| title
stringlengths 7
396
| type
stringclasses 2
values | version
stringclasses 245
values | url
stringlengths 90
98
| scope
stringlengths 0
83.8k
|
|---|---|---|---|---|---|
101 909-19-1
|
Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 19: IPCablecom Audio Server Protocol Specification; Sub-part 1: H.248 option
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/1019091901/01.01.01_60/ts_1019091901v010101p.pdf
|
The present document describes the architecture and protocols that are required for playing announcements in Voice-over IP (VoIP) IPCablecom networks, where the IVR (Interactive Voice Response) system is embedded in the IPCablecom network. Announcements are typically needed for calls that do not complete. Additionally, they may be used to provide enhanced information services to the caller. Different carrier service feature sets require different announcement sets and announcement formats. Announcements can be as basic as fixed-content announcements (e.g. all circuits busy) or as complex as those provided by intelligent IVR (Interactive Voice Response) systems. The IPCablecom service model requires that all announcements be provisioned and signalled in a standard manner for all supported call features and use case scenarios. The present document identifies a set of signalling interfaces that are used to provide announcement services within a cable network, and specifies one of these interfaces: the MP-MPC interface, based on the protocol defined in ITU-T Recommendation H.248 [3].
|
101 909-26-1
|
Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 26: Protocol Implementation Conformance Statement (PICS) proforma specification; Subpart 1: Embedded Multimedia Terminal Adapter
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/1019092601/01.01.01_60/ts_1019092601v010101p.pdf
|
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the Network-based Call Signalling, Dynamic Quality of Service, Provisioning and Security protocols for the IPCablecom (packet-based multimedia communication) system defined in TS 101 909-3 [1], TS 101 909-4 [2], TS 101 909-5 [3], TS 101 909-6 [4], TS 101 909-7 [5], TS 101 909-8 [6], TS 101 909-9 [7], TS 101 909-11 [8], in compliance with the relevant requirements specified in those specifications and in accordance with the relevant guidance given in ISO/IEC 9646-7 [18]. The supplier of a protocol implementation which is claimed to conform to is required to complete a copy of the PICS proforma provided in annex A of the present document and is required to provide the information necessary to identify both the supplier and the implementation.
|
101 909-24
|
Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 24: MTA Basic Access ISDN Interface (MTA-ISDN)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/10190924/01.01.01_60/ts_10190924v010101p.pdf
|
The present set of documents specifies IPCablecom, a set of protocols and associated element functional requirements. These have been developed to deliver Quality of Service (QoS), enhanced secure IP multimedia time critical communication services, using packetized data transmission technology to a consumer's home over a cable television Hybrid Fiber/Coaxial (HFC) data network. To facilitate maintenance and future enhancements to support other real-time multimedia services the TS 101 909 document series consist of multi-parts as detailed in TS 101 909-1 [1]. The present document is part 24 providing a technical description of this architecture, and where appropriate, identify the portions of the IPCablecom specifications that apply to this architecture and their use. The embedded, ISDN-enabled MTA (iMTA) and its interfaces are described in the present document. The definition and interfaces of a standalone ISDN MTA (S-iMTA) are not described in the present document and remain as for further study. While the initial service offerings in the IPCablecom product line are anticipated to be packet voice and packet video, the long-term project vision encompasses a large family of packet-based services. This may require in the future, not only careful maintenance control, but also an extension of the present set of documents. The present document assumes familiarity with the IPCablecom architecture, specifically with DQoS, security and call signalling.
|
101 975
|
Terrestrial Trunked Radio (TETRA); RF Sensitive Area Mode
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/101975/01.02.01_60/ts_101975v010201p.pdf
|
The present document defines the requirements for basic and enhanced TxI modes. The present document is applicable to the specification of TETRA terminal equipment.
|
101 974
|
Transmission and Multiplexing (TM); Digital Radio Relay Systems (DRRS); Radio specific SDH functionalities for transmission of sub-STM-0
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/101974/01.01.01_60/ts_101974v010101p.pdf
|
The present document defines radio specific functionality of SDH Digital Radio Relay Systems for transmission of Sub STM-0 signals referring to requirements defined by ITU-T Recommendation G.708 [5], while ETS 300 635 [1] and ETS 300 638 [2] define the radio specific functionality of STM-N respectively STM-0 radio relay systems. The typical application of systems here defined is for access networks including point-to-point and point-to-multipoint systems. For more information refer to annex A. The present document defines: • usage of media specific byte in the sSTM interface overhead; • radio specific performance monitoring; • radio protection switching requirements; and • radio specific functionality and related atomic functions.
|
101 968
|
Digital Radio Mondiale (DRM); Data applications directory
|
TS
|
1.4.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/101968/01.04.01_60/ts_101968v010401p.pdf
|
The present document gives the data application identifiers needed for Digital Radio Mondiale (DRM) system data applications and provides the references to the associated specifications. It provides details on data application transport and the mappings required to carry application specified for Digital Audio Broadcasting (DAB) in the DRM multiplex. This version has updates to the table of Fast Access Channel (FAC) Application identifiers.
|
101 909-20-1
|
Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 20: Lawful Interception; Sub-part 1: CMS based Voice Telephony Services
|
TS
|
1.1.2
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/1019092001/01.01.02_60/ts_1019092001v010102p.pdf
|
The present document defines the interception of voice communications within the IPCablecom "NCS" architecture, using a CMS for call control, as identified by a unique address (number) e.g. IUT-T Recommendation E.164 [13]. The present set of documents specifies IPCablecom, a set of protocols and associated element functional requirements. These have been developed to deliver Quality of Service (QoS), enhanced secure IP multimedia time critical communication services, using packetized data transmission technology to a consumer's home over a cable television Hybrid Fiber/Coaxial (HFC) data network. NOTE 1: IPCablecom set of documents utilize a network superstructure that overlays the two-way data-ready cable television network, e.g. as specified within ES 201 488 [12] and ES 200 800 (see bibliography). While the initial service offerings in the IPCablecom product line are anticipated to be Packet Voice and Packet Video, the long-term project vision encompasses a large family of packet-based services. This may require in the future, not only careful maintenance control, but also an extension of the present set of documents. NOTE 2: The present set of documents aims for global acceptance and applicability. It is therefore developed in alignment with standards either already existing or under development in other regions and in International Telecommunications Union (ITU). To facilitate maintenance and future enhancements to support other real-time multimedia services the documents consist of multi-parts as detailed in part 1: General. The present document is part 20 and describes a set of generic Lawful Interception (LI) mechanisms relating to IPCablecom. The objective of the present document is to define the implementation of Lawful Interception (LI) requirements within the current IP Core Network model adopted by IPCablecom. The specific deployments, where based on national variants or requirements (such as charging, applicability rules, privacy rules, etc.) or operation aspects based on vendor specific implementation (such as administration, bundling of functions into components, deployment concerns) are outside the scope of this generic document. NOTE 3: The present document neither defines the events nor the information to be provided to the handover interface, this will be included in the next edition. Lawful Interception in the Line Control Signalling (LCS) Architecture (TS 101 909-23 [4]), which uses V 5.2 to Local Exchange (LE) is entirely handled by the LE and has no impact.
|
101 947
|
Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS); Application Specific Access Profile (ASAP): V.24 Interworking
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/101947/01.01.01_60/ts_101947v010101p.pdf
|
Te present document is to define a data Application Specific Access Profile (ASAP) intended for enterprise, small office and home office (SOHO), and, home (residential/private) markets combining a selection of V.24 Interworking DECT-DPRS (EN 301 649 [3]) data services. The aim of the present document is to guarantee a sufficient level of interoperability and to provide an easy route for development of DECT DATA applications, with the features of the present document being a common fall-back option available in all equipment compliant to this profile.
|
101 909-19-2
|
Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 19: IPCablecom Audio Server Protocol Specification; Sub-part 2: MGCP option
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/1019091902/01.01.01_60/ts_1019091902v010101p.pdf
|
The present document describes the architecture and protocols that are required for playing announcements in voice over IP (VoIP) IPCablecom networks as an internal component of the IPCablecom system Announcements are typically needed for calls that do not complete. Additionally, they may be used to provide enhanced information services to the caller. Different carrier service feature sets require different announcement sets and announcement formats. Announcements can be as basic as fixed-content announcements (e.g, all circuits busy) or as complex as those provided by intelligent IVR (Interactive Voice Response) systems. The IPCablecom service model requires that all announcements be provisioned and signalled in a standard manner for all supported call features and use case scenarios. The present document identifies a set of signaling protocols that are used to provide announcement services within a cable network. For one of these protocols, the IPCablecom Network Call Signaling (NCS) protocol [1], the present document defines two new event packages: • A Base Audio Package. • An Advanced Audio Package.
|
101 909-18
|
Digital Broadband Cable access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 18: Embedded Media Terminal Adapter (e-MTA) offering an interface to analogue terminals and Cable Modem
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/10190918/01.03.01_60/ts_10190918v010301p.pdf
|
IPCablecom has defined a set of protocols and associated element functional requirements in the TS 101 909 series of documents. These have been developed to deliver Quality of Service (QoS), enhanced secure IP multimedia time critical communication services, using packetized data transmission technology to a consumer's home over a cable television Hybrid Fibre/Coaxial (HFC) data network. To facilitate maintenance and future enhancements to support other real-time multimedia services the TS 101 909 document series consist of multi-parts as detailed in TS 101 909-1 [22]. The present document ispart 18 of the IPCablecom TS 101 909 series. The present document defines an analogue POTS presentation of an IPCablecom Termination Point (E-MTA) intended to deliver 3,1 kHz voiceband services equivalent to a Public Switched Telephone Network (PSTN) or equivalent network with short length 2-wire local loop. NOTE: To be clear throughout the present document, the term "CM/MTA" will be used to denote an E-MTA. The objective of the present document is to specify the physical and electrical characteristics of the CM/MTA interfaces that are part of an analogue POTS presentation of an IPCablecom CM/MTA particularly suitable for use by new network operators, or by operators operating in several European countries. The present document specifies characteristics of the CM/MTA to enable it to operate with most existing national PSTN Terminal Equipment (TE), and especially with PSTN TE designed according to the European standards for analogue presented TEs. The electrical conditions specified at the CM/MTA are sufficient to ensure satisfactory operation of the following functions of TE: a) call control; b) transmission; c) dialling; d) ringing.
|
101 909-17
|
Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 17: Inter-domain Quality of Service
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/10190917/01.01.01_60/ts_10190917v010101p.pdf
|
The present set of documents specifies IPCablecom, a set of protocols and associated element functional requirements. These have been developed to deliver Quality of Service (QoS), enhanced secure IP multimedia time critical communication services, using packetized data transmission technology to a consumer's home over a cable television Hybrid Fibre/Coaxial (HFC) data network. NOTE 1: IPCablecom set of documents utilize a network superstructure that overlays the two-way data-ready cable television network, e.g. as specified within ES 201 488 [15] and ES 200 800 [16]. While the initial service offerings in the IPCablecom product line are anticipated to be Packet Voice and Packet Video, the long-term project vision encompasses a large family of packet-based services. This may require in the future, not only careful maintenance control, but also an extension of the present set of documents. NOTE 2: The present set of documents aims for global acceptance and applicability. It is therefore developed in alignment with standards either already existing or under development in other regions and in International Telecommunications Union (ITU).
|
101 952-1
|
Access network xDSL splitters for European deployment; Part 1: Generic specification of xDSL over POTS splitters
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/10195201/01.01.01_60/ts_10195201v010101p.pdf
|
The present document specifies requirements and test methods for the low pass and high pass part of xDSL over POTS splitters. These splitters are intended to be installed at the LE (i.e. network) side of the local loop, either at the local exchange or at a remote cabinet, and at the TE (i.e. user) side near the NTP. When used at the remote cabinet, the POTS signals can be injected locally at the cabinet, or at the central office. In the case of splitters at the TE side, the present document specifies the central splitter that is intended for use at the demarcation point of the customer premises. The majority of requirements in the present document are generic and applicable to all xDSL over POTS central splitters. In the case where any requirements are applicable to only one particular flavour of xDSL, this is clearly indicated in the clause describing the requirement. The relevant information about requirements for specific xDSL system variants is given in annex A. The splitter filter, as specified by the present document, may be implemented as an independent unit, separately from the xDSL transceiver, or may be integrated with the xDSL termination unit. The splitter may also be integrated with the base band termination unit (e.g. POTS line card); however this is outside of the scope of the present document.
|
101 909-20-2
|
Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 20: Lawful Interception; Sub-part 2: Streamed multimedia services
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/1019092002/01.02.01_60/ts_1019092002v010201p.pdf
|
The present set of documents specify IPCablecom, a set of protocols and associated element functional requirements. These have been developed to deliver Quality of Service (QoS), enhanced secure IP multimedia time critical communication services, using packetized data transmission technology to a consumer's home over a cable television Hybrid Fibre/Coaxial (HFC) data network. NOTE 1: IPCablecom set of documents utilize a network superstructure that overlays the two-way data-ready cable television network, e.g. as specified within ES 201 488 [6] and ES 200 800 [7]. While the initial service offerings in the IPCablecom product line are anticipated to be Packet Voice and Packet Video, the long-term project vision encompasses a large family of packet-based services. This may require in the future, not only careful maintenance control, but also an extension of the present set of documents. NOTE 2: The present set of documents aims for global acceptance and applicability. It is therefore developed in alignment with standards either already existing or under development in other regions and in International Telecommunications Union (ITU). The present document of the above mentioned series of ETSI deliverables specifies the interception of those multi-media services carried over the network defined in the remainder of the above mentioned series of ETSI deliverables that do not fall into the interception domain covered by sub-part 1 of TS 101 909-20-1 [5]. The present document describes the implementation of a Lawful Interception (LI) interface in an IPCablecom system. It provides the requirements and specification of the interface within an IPCablecom system for the purpose of providing data to Law Enforcement Agencies (LEAs) in the area of (LI) of communications. The provision of a (LI) interface for IPCablecom is a national option, however where it is provided it shall be provided as described in the present document. The structure of (LI) in telecommunications is in two parts: The internal interface of a network that is built using a particular technology; and, the external interface (known as the Handover Interface) that links the LEA to the network. Between these two parts may lie a mediation function to cater for national variances and delivery of the result of interception. The Handover Interface is specified in TS 102 232 [11] and TS 102 234 [10]. In addition, the Handover Interface may be the subject of national regulation and therefore the mediation function may also be a matter of national regulation. The subject of the present document is the internal LI interface that lies between the IPCablecom infrastructure and the mediation function. The present document describes the data content of information flows from the IPCablecom system to the mediation function. The present document is structured as follows: • clause 4 describes the IPCablecom architecture and services to which LI applies; • clause 5 presents architecture for LI in an IPCablecom system; • clause 6 presents the data model and behaviour for interception of signalling; • clause 7 presents the data model and behaviour for interception of the content of communication; NOTE 3: The content of communication in IPCablecom is an IP packet. • clause 8 presents the security provisions for LI; • the annexes provide illustrations of the management of LI in an IPCablecom environment. The present document applies to IPCablecom services where access to the communication of IPCablecom users is available in a network, and where the services being intercepted do not include the PSTN/ISDN emulation services whose interception is described in TS 101 909-20-1 [5]. ETSI ETSI TS 101 909-20-2 V1.2.1 (2006-03) 8 The present document does not describe the means of transporting data from the IPCablecom network to the LEA, but describes only the means of capturing and encoding the activities of a target within the IPCablecom network and delivering this data to the mediation function. The present document does not define the operations or technical requirements of the Handover Interface that takes data from the mediation function to the LEMF. The present document does not define the operations or technical requirements of the Law Enforcement Monitoring Facility (LEMF). NOTE 4: No test point is provided in the present document to ensure conformance.
|
101 964
|
Digital Video Broadcasting (DVB); Control Channel for SMATV/MATV distribution systems; Baseline Specification
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/101964/01.01.01_60/ts_101964v010101p.pdf
|
The present document specifies the Control Channel for SMATV/MATV distribution systems based on EN 300 743. The present document is intended to provide remote control of the head-end device from the user's terminal through a set of commands in a closed in-building environment for the delivery of broadcast services. Provision for interactive services is out of the scope of the present document.
|
101 952-4
|
Access, Terminals, Transmission and Multiplexing (ATTM); Access network xDSL splitters for European deployment; Part 4: Specification for dynamic distributed filters for xDSL over POTS
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/10195204/01.01.01_60/ts_10195204v010101p.pdf
|
The present document specifies the requirements and test methods for "xDSL over POTS" dynamic distributed filters. The distributed filters are installed at the user side of the local loop in the customer premises. • Unlike the splitters (sometimes called central splitters to distinguish them from distributed filters) described in TS 101 952-1 [11] and TS 101 952-2 [12], the distributed filters do not contain a high pass part. Therefore, only the low pass part is specified and tested. • The central splitters mentioned above are used as a single device at each end of the line while distributed filters are normally not used as a single device but as multiple parallel devices at the user side.
|
101 962
|
Terrestrial Trunked Radio (TETRA); TETRA Advanced Packet Service (TAPS)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/101962/01.01.01_60/ts_101962v010101p.pdf
|
The present document specifies the technical requirements for equipment that supports packet data services and operates in the following TETRA bands: • TETRA 380: 380-390 MHz Mobile transmit; 390-400 MHz base station transmit; • TETRA 410: 410-420 MHz Mobile transmit; 420-430 MHz base station transmit; • TETRA 450: 450-460 MHz Mobile transmit; 460-470 MHz base station transmit; • TETRA 870: 870-876 MHz Mobile transmit; 915-921 MHz base station transmit. The technology to be used is that of GSM and the technical requirements are specified by reference to the GSM standards. This specification lists the GSM standards and specifications that apply and specifies which clauses are retained, deleted or amended. The amendments are specified in the annexes of the present document. The scope of the present document covers the following interfaces, Gi, Gr, Gp and the Air Interface. The present document supports the following packet data traffic channels: • PDTCH/F; • PDTCH/H; • PDTCH/U; • PDTCH/D. It also supports SMS in packet channels and their associated signalling. All circuit switched channels, including all speech channels are outside the scope of the present document. NOTE 1: TAPS adapts (E)GPRS technology to provide an overlay network for TETRA systems. TAPS provides high speed packet data at speeds approximately ten times that available in existing TETRA, to support multimedia and other high speed data applications required by existing and future TETRA users. NOTE 2: TR 101 976 provides an overview description of the principles of TAPS, including a description of the structure of the TAPS specifications.
|
101 909-22
|
Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 22: Management Event Messages
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/10190922/01.01.01_60/ts_10190922v010101p.pdf
|
The present set of documents specifies IPCablecom, a set of protocols and associated element functional requirements. These have been developed to deliver Quality of Service (QoS), enhanced secure IP multimedia time critical communication services, using packetized data transmission technology to a consumer's home over a cable television Hybrid Fibre/Coaxial (HFC) data network. NOTE 1: IPCablecom set of documents utilize a network superstructure that overlays the two-way data-ready cable television network, e.g. as specified within ES 201 488 [5] and ES 200 800 [6]. While the initial service offerings in the IPCablecom product line are anticipated to be Packet Voice and Packet Video, the long-term project vision encompasses a large family of packet-based services. This may require in the future, not only careful maintenance control, but also an extension of the present set of documents. NOTE 2: The present set of documents aims for global acceptance and applicability. It is therefore developed in alignment with standards either already existing or under development in other regions and in International Telecommunications Union (ITU).
|
101 909-13-2
|
Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 13: Trunking Gateway Control Protocol; Sub-part 2: MGCP option
|
TS
|
1.1.2
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/1019091302/01.01.02_60/ts_1019091302v010102p.pdf
|
The present set of documents specify IPCablecom, a set of protocols and associated element functional requirements. These have been developed to deliver Quality of Service (QoS), enhanced secure IP multimedia time critical communication services, using packetized data transmission technology to a consumer's home over a cable television Hybrid Fibre/Coaxial (HFC) data network. NOTE 1: IPCablecom set of documents utilize a network superstructure that overlays the two-way data-ready cable television network, e.g. as specified within ES 201 488 [5] and ES 200 800 [6]. While the initial service offerings in the IPCablecom product line are anticipated to be Packet Voice and Packet Video, the long-term project vision encompasses a large family of packet-based services. This may require in the future, not only careful maintenance control, but also an extension of the present set of documents. NOTE 2: The present set of documents aims for global acceptance and applicability. It is therefore developed in alignment with standards either already existing or under development in other regions and in International Telecommunications Union (ITU). The present document specifies a profile of the MGCP protocol for controlling media gateways between cable networks and the PSTN.
|
101 909-12
|
Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 12: Internet Signalling Transport Protocol (ISTP)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/10190912/01.01.01_60/ts_10190912v010101p.pdf
|
The present document describes the Internet Signalling Transport Protocol (ISTP) to implement Signalling System No. 7 signalling interconnection to a distributed IPCablecom architecture. The present document addresses the protocol to implement ETSI SS7 used for signalling interconnection in a distributed IPCablecom architecture. Specifically, it defines the messages and procedures for transporting SS7 ISUP, and TCAP messages as defined by ETSI specifications between the IPCablecom control functions (Media Gateway Controller and Call Management Server) and the SS7 Signalling Gateway. The IPCablecom Networks are always connected to the PSTN/ISDN using standard ETSI SS7 interfaces Ref (ISUP, MTP and SCCP) Areas beyond the scope of the present document include: • address layer management (SNMP), security, and measurements; these are covered in other IPCablecom Recommendations; • implementation and vendor dependant issues, such as performance, functional distribution, network configuration, etc.; • details about CMS, MGC, and other media communication applications.
|
101 909-11
|
Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 11: Security
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/10190911/01.02.01_60/ts_10190911v010201p.pdf
|
Authentication, access control, signalling and media content integrity, confidentiality, and non-repudiation security services must be provided as defined herein for each of the network element interfaces. IPCablecom security spans the entire IPCablecom architecture. The IPCablecom Architecture Framework document, TS 101 909-2 [3] defines the overall IPCablecom architecture, as well as the system elements, interfaces, and functional requirements for the entire IPCablecom network.
|
101 909-13-1
|
Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 13: Trunking Gateway Control Protocol; Sub-part 1: H.248 option
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/1019091301/01.02.01_60/ts_1019091301v010201p.pdf
|
The present document specifies a profile of the ITU-T Recommendation H.248 protocol [1] for controlling media gateways between cable networks and the PSTN. This profile is known as Trunking Gateway Control Protocol (TGCP) version 1.
|
101 909-9
|
Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 9: Network Call Signalling (NCS) MIB Requirements
|
TS
|
1.3.2
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/10190909/01.03.02_60/ts_10190909v010302p.pdf
|
The present set of documents specify IPCablecom, a set of protocols and associated element functional requirements. These have been developed to deliver Quality of Service (QoS), enhanced secure IP multimedia time critical communication services, using packetized data transmission technology to a consumer's home over a cable television Hybrid Fibre/Coaxial (HFC) data network. NOTE 1: IPCablecom set of documents utilize a network superstructure that overlays the two-way data-ready cable television network, e.g. as specified within ES 201 488 [2] and ES 200 800 [3]. While the initial service offerings in the IPCablecom product line are anticipated to be Packet Voice and Packet Video, the long-term project vision encompasses a large family of packet-based services. This may require in the future, not only careful maintenance control, but also an extension of the present set of documents. NOTE 2: The present set of documents aims for global acceptance and applicability. It is therefore developed in alignment with standards either already existing or under development in other regions and in International Telecommunications Union (ITU). The present document is part 9 and covers Network Call Signalling (NCS) Management Information Base (MIB) Requirements.
|
101 909-7
|
Access and Terminals (AT); Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 7: Management Information Base (MIB) Framework
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/10190907/01.02.01_60/ts_10190907v010201p.pdf
|
The present set of documents specify IPCablecom, a set of protocols and associated element functional requirements. These have been developed to deliver Quality-of-Service (QoS), enhanced secure IP multimedia time critical communication services, using packetized data transmission technology to a consumer's home over a cable television Hybrid Fibre/Coaxial (HFC) data network. NOTE 1: IPCablecom set of documents utilize a network superstructure that overlays the two-way data-ready cable television network, e.g. as specified within ES 201 488 [2] and ES 200 800 [3]. While the initial service offerings in the IPCablecom product line are anticipated to be Packet Voice and Packet Video, the long-term project vision encompasses a large family of packet-based services. This may require in the future, not only careful maintenance control, but also an extension of the present set of documents. NOTE 2: The present set of documents aims for global acceptance and applicability. It is therefore developed in alignment with standards either already existing or under development in other regions and in International Telecommunications Union (ITU).
|
101 909-6
|
Access and Terminals (AT); Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 6: Media Terminal Adapter (MTA) device provisioning
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/10190906/01.01.01_60/ts_10190906v010101p.pdf
|
The present set of documents specify IPCablecom, a set of protocols and associated element functional requirements. These have been developed to deliver Quality-of-Service (QoS), enhanced secure IP multimedia time critical communication services, using packetized data transmission technology to a consumer's home over a cable television Hybrid Fibre/Coaxial (HFC) data network. NOTE 1: IPCablecom set of documents utilize a network superstructure that overlays the two-way data-ready cable television network, e.g. as specified within ES 201 488 and ES 200 800. While the initial service offerings in the IPCablecom product line are anticipated to be Packet Voice and Packet Video, the long-term project vision encompasses a large family of packet-based services. This may require in the future, not only careful maintenance control, but also an extension of the present set of documents. NOTE 2: The present set of documents aims for global acceptance and applicability. It is therefore developed in alignment with standards either already existing or under development in other regions and in International Telecommunications Union (ITU).
|
101 909-10
|
Access and Terminals (AT); Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 10: Event Message Requirements for the Provision of Real Time Services over Cable Television Networks using Cable Modems
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/10190910/01.01.01_60/ts_10190910v010101p.pdf
|
The present document specifies IPCablecom, a set of protocols and associated element functional requirements. These have been developed to deliver Quality of service (QoS), enhanced secure IP multimedia time critical communication services, using packetized data transmission technology to a consumer's home over a cable television Hybrid Fibre/Coaxial (HFC) data network. NOTE 1: IPCablecom set of documents utilize a network superstructure that overlays the two-way data-ready cable television network, e.g. as specified within ES 201 488 and ES 200 800. While the initial service offerings in the IPCablecom product line are anticipated to be Packet Voice and Packet Video, the long-term project vision encompasses a large family of packet-based services. This may require in the future, not only careful maintenance control, but also an extension of the present set of documents. NOTE 2: The present set of documents aims for global acceptance and applicability. It is therefore developed in alignment with standards either already existing or under development in other regions and in International Telecommunications Union (ITU).
|
101 909-4
|
Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 4: Network Call Signalling Protocol [Partial Endorsement of ITU-T Recommendation J.162 (11/2005), modified]
|
TS
|
1.5.2
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/10190904/01.05.02_60/ts_10190904v010502p.pdf
|
The present document is a multi-part deliverable belonging to IPCablecom. The present part (part 4) specifies a profile of an application programming interface, Media Gateway Controller Interface (MGCI), and a corresponding protocol, Media Gateway Control Protocol (MGCP), for controlling Voice over IP (VoIP) embedded clients from external call control elements. The MGCP is based on a call control architecture, where the call control "intelligence" resides outside the gateways and is handled by external call control elements. The profile, as described in the present document, is referred to as the Network Call Signalling (NCS) Protocol. Annex B of the present document specifies an expansion of the NCS protocol to emulate an Access Node of an ETSI compliant local exchange. This annex specifies the mapping of expansion of the NCS protocol to V5.2. Annex F of the present document specifies optional NCS components for the delivery of metering pulses. This multi-part deliverable specifies IPCablecom, a set of protocols and associated element functional requirements. These have been developed to deliver high Quality of Service (QoS), enhanced secure IP multimedia time critical communication services to a consumer's home over a cable television Hybrid Fibre/Coaxial (HFC) data network. NOTE 1: IPCablecom defines a set of documents in the framework of a network superstructure that overlays the two-way data-ready cable television network, e.g. as specified within ES 201 488 [5] and ES 200 800 [3]. While the initial service offerings in the IPCablecom product line are anticipated to be Packet Voice and Packet Video, the long-term project vision encompasses a large family of packet-based services. This may require in the future, not only careful maintenance control but also an extension of the present set of documents. NOTE 2: The present set of documents aims for global acceptance and applicability. It is therefore developed in alignment with standards either already existing or under development in other regions and in International Telecommunications Union (ITU). NOTE 3: There may also be relevant equivalent studies on-going in IETF or ITU specific to the needs of European IPCablecom. Where possible ETSI TC AT-D working group for IPCablecom should align annex B package annex or similar packages addressing the specific needs of European IPCablecom with work on going in IETF, Cablelabs, or the ITU.
|
101 909-8
|
Access and Terminals (AT); Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 8: Media Terminal Adapter (MTA) Management Information Base (MIB)
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/10190908/01.02.01_60/ts_10190908v010201p.pdf
|
The present set of documents specify IPCablecom, a set of protocols and associated element functional requirements. These have been developed to deliver Quality-of-Service (QoS), enhanced secure IP multimedia time critical communication services, using packetized data transmission technology to a consumer's home over a cable television Hybrid Fibre/Coaxial (HFC) data network. NOTE 1: IPCablecom set of documents utilize a network superstructure that overlays the two-way data-ready cable television network, e.g. as specified within ES 201 488 [2] and ES 200 800 [3]. While the initial service offerings in the IPCablecom product line are anticipated to be Packet Voice and Packet Video, the long-term project vision encompasses a large family of packet-based services. This may require in the future, not only careful maintenance control, but also an extension of the present set of documents. NOTE 2: The present set of documents aims for global acceptance and applicability. It is therefore developed in alignment with standards either already existing or under development in other regions and in International Telecommunications Union (ITU).
|
101 909-5
|
Access and Terminals (AT); Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 5: Dynamic Quality of Service for the Provision of Real Time Services over Cable Television Networks using Cable Modems
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/10190905/01.01.01_60/ts_10190905v010101p.pdf
|
The present set of documents specify IPCablecom, a set of protocols and associated element functional requirements. These have been developed to deliver Quality-of-Service (QoS), enhanced secure IP multimedia time critical communication services, using packetized data transmission technology to a consumer’s home over a cable television Hybrid Fibre/Coaxial (HFC) data network. NOTE 1: IPCablecom set of documents utilize a network superstructure that overlays the two-way data-ready cable television network, e.g. as specified within ES 201 488 and ES 200 800. While the initial service offerings in the IPCablecom product line are anticipated to be Packet Voice and Packet Video, the long-term project vision encompasses a large family of packet-based services. This may require in the future, not only careful maintenance control, but also an extension of the present set of documents. NOTE 2: The present set of documents aims for global acceptance and applicability. It is therefore developed in alignment with standards either already existing or under development in other regions and in International Telecommunications Union (ITU).
|
101 906
|
Corporate Telecommunication Networks (CN); Signalling interworking between QSIG and H.323; Call Diversion supplementary services
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/101906/01.02.01_60/ts_101906v010201p.pdf
|
The present document specifies signalling interworking between "QSIG" and "H.323" in support of call diversion supplementary services within a Corporate telecommunication Network (CN). "QSIG" is a signalling protocol that operates at the Q reference point between Private Integrated Services eXchanges (PINX) within a Private Integrated Services Network (PISN). The Q reference point is defined in ECMA-133. A PISN provides circuit-switched basic services and supplementary services to its users. QSIG is specified in other Standards, in particular ECMA-143 (call control in support of basic services), ECMA-165 (generic functional protocol for the support of supplementary services) and a number of standards specifying individual supplementary services. ECMA-174 specifies the QSIG protocol in support of call diversion services. ETSI ETSI TS 101 906 V1.2.1 (2001-08) 7 "H.323" is a set of signalling protocols for the support of voice or multimedia communication within a packet network, in particular a packet network that uses the Internet Protocol (IP) as its network layer protocol (IP network). H.323 signalling protocols operate between endpoints in an IP network, either indirectly via one or more gatekeepers, or directly. An endpoint can be a terminal or a gateway to another network. H.323 is an "umbrella" recommendation referring to various ITU-T Recommendations, in particular H.225.0 and H.245 (basic communication capabilities) and H.450.1 (generic functional protocol for the support of supplementary services). Recommendation H.450.3 specifies the H.323 protocol in support of call diversion services. NOTE: ITU-T Recommendation H.450.3 applies only to the 1998 version of H.323 (also known as H.323 version 2) and to later versions. In both ECMA-174 (QSIG) and ITU-Recommendation H.450.3 (H.323), the call diversion supplementary services are Call Forwarding Unconditional (SS-CFU), Call Forwarding Busy (SS-CFB), Call Forwarding No Reply (SS-CFNR) and Call Deflection (SS-CD). These supplementary services apply during call establishment and provide diversion of an incoming call to another destination. Interworking between QSIG and H.323 permits a call originating at a user of a PISN to terminate at a user of an IP network, or a call originating at a user of an IP network to terminate at a user of a PISN. The present document provides the following additional capabilities: • a call originating from a PISN and destined for a user of an H.323 network to be diverted by the H.323 network to an alternative destination; • a call originating from an H.323 network and destined for a user of a PISN to be diverted by the PISN to an alternative destination; • a call destined for a user of a PISN to be diverted to an alternative destination where that alternative destination is in an H.323 network; • a call destined for a user of an H.323 network to be diverted to an alternative destination where that alternative destination is in a PISN. The present document is applicable to any interworking unit that can act as a gateway between a PISN employing QSIG and an IP network employing H.323.
|
101 907
|
Corporate Telecommunication Networks (CN); Signalling interworking between QSIG and H.323; Call Transfer supplementary services
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/101907/01.02.01_60/ts_101907v010201p.pdf
|
The present document specifies signalling interworking between "QSIG" and "H.323" in support of the call transfer supplementary services within a Corporate telecommunication Network (CN). "QSIG" is a signalling protocol that operates at the Q reference point between Private Integrated Services eXchanges (PINX) within a Private Integrated Services Network (PISN). The Q reference point is defined in ECMA-133. A PISN provides circuit-switched basic services and supplementary services to its users. QSIG is specified in other standards, in particular ECMA-143 (call control in support of basic services), ECMA-165 (generic functional protocol for the support of supplementary services) and a number of standards specifying individual supplementary services. ECMA-178 specifies the QSIG protocol in support of call transfer by consultation and ECMA-300 specifies the QSIG protocol in support of single step call transfer. "H.323" is a set of signalling protocols for the support of voice or multimedia communication within a packet network, in particular a packet network that uses the Internet Protocol (IP) as its network layer protocol (IP network). H.323 signalling protocols operate between endpoints in an IP network, either indirectly via one or more gatekeepers, or directly. An endpoint can be a terminal or a gateway to another network. H.323 is an "umbrella" recommendation referring to various ITU-T Recommendations, in particular Recommendations H.225.0 and H.245 (basic communication capabilities) and ITU-T Recommendation H.450.1 (generic functional protocol for the support of supplementary services). ITU-T Recommendation H.450.2 specifies the H.323 protocol in support of call transfer. NOTE: H.450.2 applies only to the 1998 version of H.323 (also known as H.323 version 2) and to later versions. Call transfer by consultation, as supported by ECMA-178, is a supplementary service that enables a user (user A) to transform two of that user's calls (at least one of which must be answered) into a new call between the two other users in the two calls (users B and C). Single step call transfer, as supported by ECMA-300, is a supplementary service that enables a user (user A) to transform an existing call between user A and user B into a new call between user B and user C without user A needing to establish a call with user C prior to transfer. Call transfer, as supported by H.450.2, is a supplementary service that enables the served user (user A) to transform an existing call with a second user (user B) into a new call between user B and a third user (user C) selected by user A. User A may or may not have a call established with user C prior to call transfer. If a call is already established between user A and user C, this is known as transfer by consultation and is equivalent to call transfer as supported by ECMA-178. If a call is not already established between user A and user C, this is known as single step call transfer and is equivalent to call transfer as supported by ECMA-300. Interworking between QSIG and H.323 permits a call originating at a user of a PISN to terminate at a user of an IP network, or a call originating at a user of an IP network to terminate at a user of a PISN. The present document provides the following additional capabilities: • a PISN user with two calls established, at least one of which being to or from a user in an IP network, to be able to transform those two calls into a new call between the other two users involved; • a PISN user with a call established to or from a user in an IP network to be able to transform that call into a new call between the IP network user and a third user selected by the PISN user, that third user being either in the IP network or in the PISN; • a PISN user with a call established to a second PISN user to be able to transfer that call into a new call between the second user and a third user selected by the first user, that third user being in an IP network; • an IP network user with two calls established, at least one of which being to or from a user in a PISN, to be able to transform those two calls into a new call between the other two users involved; • an IP network user with a call established to or from a user in a PISN to be able to transform that call into a new call between the PISN user and a third user selected by the IP network user, that third user being either in the IP network or in the PISN; and • an IP network user with a call established to a second user in the IP network to be able to transfer that call into a new call between the second user and a third user selected by the first user, that third user being in a PISN. ETSI ETSI TS 101 907 V1.2.1 (2001-08) 8 The present document is applicable to any interworking unit that can act as a gateway between a PISN employing QSIG and an IP network employing H.323.
|
101 909-3
|
Access and Terminals (AT); Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 3: Audio Codec Requirements for the Provision of Bi-Directional Audio Service over Cable Television Networks using Cable Modems
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/10190903/01.01.01_60/ts_10190903v010101p.pdf
|
The present set of documents specify IPCablecom, a set of protocols and associated element functional requirements. These have been developed to deliver Quality-of-Service (QoS), enhanced sure IP multimedia time critical communication services, using packetized data transmission technology to a consumer's home over a cable television Hybrid Fibre/Coaxial (HFC) data network. NOTE 1: IPCablecom set of documents utilize a network superstructure that overlays the two-way data-ready cable television network, e.g. as specified within ES 201 488 and ES 200 800. While the initial service offerings in the IPCablecom product line are anticipated to be Packet Voice and Packet Video, the long-term project vision encompasses a large family of packet-based services. This may require in the future, not only careful maintenance control, but also an extension of the present set of documents. NOTE 2: The present set of documents aims for global acceptance and applicability. It is therefore developed in alignment with standards either already existing or under development in other regions and in International Telecommunications Union (ITU).
|
101 909-1
|
Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 1: General
|
TS
|
1.4.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/10190901/01.04.01_60/ts_10190901v010401p.pdf
|
The present set of documents specifies IPCablecom, a set of protocols and associated element functional requirements. These have been developed to deliver Quality of Service (QoS), enhanced secure IP multimedia time critical communication services, using packetized data transmission technology to a consumer's home over a cable television Hybrid Fibre/Coaxial (HFC) data network. NOTE 1: IPCablecom set of documents utilize a network superstructure that overlays the two-way data-ready cable television network, e.g. as specified within ES 201 488 [2] and ES 200 800 [3]. While the initial service offerings in the IPCablecom product line are anticipated to be Packet Voice and Packet Video, the long-term project vision encompasses a large family of packet-based services. This may require in the future, not only careful maintenance control, but also an extension of the present set of documents. NOTE 2: The present set of documents aims for global acceptance and applicability. It is therefore developed in alignment with standards either already existing or under development in other regions and in International Telecommunications Union (ITU). The present document is part 1 of the above mentioned series of ETSI deliverables and specifies general aspects of IPCablecom based on J.16x and J.17x ITU-T series of Recommendations.
|
101 892
|
Telecommunications Management Network (TMN); Protocol and interface service requirements;
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/101892/01.01.01_60/ts_101892v010101p.pdf
|
The present document specifies key application level protocol and message service requirements to support TMN management interfaces. It includes a general set of requirements together with requirements based on the traditional FCAPS functional breakdown for management. The present document is applicable to the selection of interface technology for the TMN architecture defined in ITU-T Recommendation M.3010 [1]. The primary requirements that should be supported across an interface at any particular management layer will be dependent on the functionality to be managed across that interface.
|
101 888-2
|
Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON) Release 4; Security Test Specifications; Part 2: H.323 Environment
|
TS
|
4.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10188802/04.01.01_60/ts_10188802v040101p.pdf
|
The present document is one part of the security testing standards for which a framework is available in TR 101 888-1. The scope of the present document is to define the security test specifications for TIPHON Release 4 for the H.323 environment. The security methods considered in the present document are related only to IP based networks. The signalling path and the media path in the SCN is considered to be secure ("Trust by wire").
|
101 909-2
|
Digital Broadband Cable Access to the Public Telecommunications Network; IP Multimedia Time Critical Services; Part 2: Architectural framework for the delivery of time critical services over cable Television networks using cable modems
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/10190902/01.02.01_60/ts_10190902v010201p.pdf
|
The present set of documents specify IPCablecom, a set of protocols and associated element functional requirements. These have been developed to deliver Quality of Service (QoS), enhanced secure IP multimedia time critical communication services, using packetized data transmission technology to a consumer's home over a cable television Hybrid Fibre/Coaxial (HFC) data network. NOTE 1: IPCablecom set of documents utilize a network superstructure that overlays the two-way data-ready cable television network, e.g. as specified within ES 201 488 [8] and ES 200 800 [9]. While the initial service offerings in the IPCablecom product line are anticipated to be Packet Voice and Packet Video, the long-term project vision encompasses a large family of packet-based services. This may require in the future, not only careful maintenance control, but also an extension of the present set of documents. NOTE 2: The present set of documents aims for global acceptance and applicability. It is therefore developed in alignment with standards either already existing or under development in other regions and in International Telecommunications Union (ITU).
|
101 890-3
|
Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON) Release 3; Technology Compliance Specifications; TIPHON profile for ITU-T H.245; Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10189003/01.01.01_60/ts_10189003v010101p.pdf
|
The present document specifies the Abstract Test Suite (ATS) for TIPHON profile for ITU-T Recommendation H.245 [4], according to TS 101 883 [1]. The objective of this test specification is to provide a basis for conformance tests for TIPHON profile for ITU-T Recommendation H.245 equipment giving a high probability of inter-operability between different manufacturer's TIPHON profile for ITU-T Recommendation H.245 equipments. This test specification covers the procedures described in TS 101 883 [1], ITU-T Recommendation H.323 [2] and ITU-T Recommendation H.245 [4]. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [6] and ISO/IEC 9646-2 [7]) as well as the ETSI rules for conformance testing (ETS 300 406 [5]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of the ATS. Annex B provides the Partial Protocol Implementation eXtra Information for Testing (PIXIT) Proforma of the ATS. Annex C provides the Protocol Conformance Test Report (PCTR) Proforma of the ATS.
|
101 890-2
|
Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON) Release 3; Technology Compliance Specifications; TIPHON profile for ITU-T H.245; Part 2: Test Suite Structure and Test Purposes (TSS&TP) specification
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10189002/01.01.01_60/ts_10189002v010101p.pdf
|
The present document specifies the Test Suite Structure and Test Purposes (TSS&TP) for TIPHON profile for ITU-T Recommendation H.245 [4], according to TS 101 883 [1]. The objective of this test specification is to provide a basis for conformance tests for TIPHON profile for ITU-T Recommendation H.245 equipment giving a high probability of inter-operability between different manufacturer's TIPHON profile for ITU-T Recommendation H.245 equipments. This test specification covers the procedures described in TS 101 883 [1], ITU-T Recommendation H.323 [3] and ITU-T Recommendation H.245 [4]. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [6] and ISO/IEC 9646-2 [7]) as well as the ETSI rules for conformance testing (ETS 300 406 [5]) are used as a basis for the test methodology.
|
101 896
|
Powerline Telecommunications (PLT); Reference Network Architecture Model PLT phase 1
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/101896/01.01.01_60/ts_101896v010101p.pdf
|
The scope of the present document specifies the 2 areas of PLT interworking: a) interworking between PLT (PowerLine Telecommunication) networks and telecommunication networks for telecommunication services; b) embedding of PLT into energy networks.
|
101 885
|
<empty>
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/101885/01.01.01_60/ts_101885v010101p.pdf
|
The present document describes how the H.248/MEGACO protocol ([1] to [21]) can be used to implement the architecture, defined in TS 101 314 [24] and the primitives, information elements and behaviours, defined in TS 101 882-4 [22] and TS 101 882-5 [23]. The present document defines the mapping of the Media Control meta-protocol. The document is applicable to all equipments and entities within a network that are necessary to support TIPHON Release 4 architecture.
|
101 889-3
|
<empty>
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10188903/01.01.01_60/ts_10188903v010101p.pdf
|
The present document specifies the Abstract Test Suite (ATS) for TIPHON profile for ITU-T Recommendation H.248, according to TS 101 885 [1]. The objective of the present document is to provide a basis for conformance tests for TIPHON profile for ITU-T Recommendation H.248 equipment giving a high probability of inter-operability between different manufacturer's TIPHON profile for ITU-T Recommendation H.248 equipments. The present document covers the procedures described in TS 101 885 [1] and ITU-T Recommendation H.248 [4]. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [6] and ISO/IEC 9646-2 [7]) as well as the ETSI rules for conformance testing (ETS 300 406 [5]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of the ATS. Annex B provides the partial Protocol Implementation eXtra Information for Testing (PIXIT) Proforma of the ATS. Annex C provides the Protocol Conformance Test Report (PCTR) proforma of the ATS.
|
101 889-1
|
<empty>
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10188901/01.01.01_60/ts_10188901v010101p.pdf
|
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the audiovisual and multimedia systems Infrastructure of audiovisual services - Communication procedures, Gateway control protocol, ITU-T Recommendation H.248.1 [20] in compliance with the relevant requirements specified in TS 101 885 [1] and in accordance with the relevant guidance given in ISO/IEC 9646-7 [22]. The supplier of a protocol implementation which is claimed to conform to TIPHON mapping to H.248.1 [20] is required to complete a copy of the PICS proforma provided in annex A of the present document and is required to provide the information necessary to identify both the supplier and the implementation.
|
101 905
|
Corporate Telecommunication Networks (CN); Signalling interworking between QSIG and H.323; Generic functional protocol for the support of supplementary services
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101900_101999/101905/01.01.01_60/ts_101905v010101p.pdf
|
The present document specifies signalling interworking between "QSIG" and "H.323" in support of generic functional procedures for supplementary services within a Corporate telecommunication Network (CN). "QSIG" is a signalling protocol that operates at the Q reference point between Private Integrated Services eXchanges (PINX) within a Private Integrated Services Network (PISN). The Q reference point is defined in ECMA-133 [1]. A PISN provides circuit-switched basic services and supplementary services to its users. QSIG is specified in other ECMA Standards, in particular ECMA-143 [2] (call control in support of basic services), ECMA-165 [3] (generic functional protocol for the support of supplementary services) and a number of standards specifying individual supplementary services. "H.323" is a set of signalling protocols for the support of voice or multimedia communication within a packet network, in particular a packet network that uses the Internet Protocol (IP) as its network layer protocol (IP network). H.323 signalling protocols operate between endpoints in an IP network, either indirectly via one or more gatekeepers, or directly. An endpoint can be a terminal or a gateway to another network. H.323 is an "umbrella" recommendation, referring to various ITU-T recommendations, in particular Recommendations H.225.0 [4] and H.245 [5] (basic communication capabilities) and Recommendation H.450.1 [7] (generic functional protocol for the support of supplementary services). NOTE: H.450.1 applies to the 1998 version of H.323 (also known as H.323 version 2) and to later versions. Interworking between QSIG and H.323 permits a call originating at a user of a PISN to terminate at a user of an IP network, or a call originating at a user of an IP network to terminate at a user of a PISN. In addition the present document enables the participants of a call to exchange supplementary service control information in a generic way. The more specific aspects of interworking particular supplementary services are specified in other ECMA Standards. The present document is applicable to any interworking unit that can act as a gateway between a PISN employing QSIG and an IP network employing H.323.
|
101 885
|
<empty>
|
TS
|
4.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/101885/04.01.01_60/ts_101885v040101p.pdf
|
The present document describes how the H.248/MEGACO protocol ([1] to [21]) can be used to implement the architecture, defined in TS 101 314 [24] and the primitives, information elements and behaviours, defined in TS 101 882-4 [22] and TS 101 882-5 [23]. The present document defines the mapping of the Media Control meta-protocol. The document is applicable to all equipments and entities within a network that are necessary to support TIPHON Release 4 architecture.
|
101 890-1
|
Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON) Release 3; Technology Compliance Specifications; TIPHON profile for ITU-T H.245; Part 1: Protocol Implementation Conformance Statement (PICS) proforma specification
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10189001/01.01.01_60/ts_10189001v010101p.pdf
|
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the control protocol for multimedia communication as specified in ITU-T Recommendation H.245 [3] in compliance with the relevant requirements specified in TS 101 883 [1] and in accordance with the relevant guidance given in ISO/IEC 9646-7 [5]. The supplier of a protocol implementation which is claimed to conform to ITU-T Recommendation H.245 [3] as specified in TS 101 883 [1] is required to complete a copy of the PICS proforma provided in annex A of the present document and is required to provide the information necessary to identify both the supplier and the implementation.
|
101 882-5
|
<empty>
|
TS
|
4.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10188205/04.01.01_60/ts_10188205v040101p.pdf
|
The present document defines the stage 1 and stage 2 (as defined by ITU-T Recommendation I.130 [6]) requirements for the transport control service.
|
101 889-2
|
<empty>
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10188902/01.01.01_60/ts_10188902v010101p.pdf
|
The present document specifies the Test Suite Structure and Test Purposes (TSS&TP) for the TIPHON mapping to H248 protocol as defined in TS 101 885 [1]. The objective of the present document is to provide conformance tests for TIPHON profile for ITU-T Recommendation H.248.1 equipment giving a greater probability of inter-operability between different manufacturer's TIPHON profile for ITU-T Recommendation H.248.1 equipments. ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [4], ISO/IEC 9646-2 [5] and ISO/IEC 9646-3 [6]) as well as the ETSI rules for conformance testing (ETS 300 406 [7]) are used as basis for the test methodology.
|
101 883
|
<empty>
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/101883/01.01.01_60/ts_101883v010101p.pdf
|
The present document describes how the H.323 [1] protocol suite can be used to implement the architecture, defined in TS 101 882 part 1 [8] to part 5 [12]. The present document defines the mapping of the following services: • Registration and Service Attachment service; • Simple Call service; • Media Control Service; and • Transport control service. The present document is applicable to equipment performing the roles of terminal, gateway, gatekeeper, AuF, VLF, HLF, MT, BE and also to entities within the IP network that are necessary to support TIPHON Release 4. The H.323 profile contained in the present document was derived by examination of: • ITU-T Recommendation H.323 [1] and associated suite of protocols: - H.225.0 (RAS and Q.931); - H.245 (Media control channel-signalling protocol); - H.501 (Mobility and Collaboration procedures - Overview of Mobility and Collaboration, definitions, protocols and procedures); - H.510 (Mobility and Collaboration procedures - Mobility for H-Series multimedia systems and services); - H.235 (Security and encryption for H-series (H.323 and other H.245-based) multimedia terminals); and - H.530 (Mobility and Collaboration procedures - Security for mobile multimedia systems and services) • the capabilities required by TS 101 878 [14] for the support of TIPHON; • end-to-end Quality of Service in TS 102 024-3 [15]; • the TIPHON baseline architecture described in TS 101 314 [13]; and • the primitives, parameters and procedures defined in ETSI TS 101 882-1 [8]. Figure 1 is derived from TS 101 314 [13] and illustrates the scope of the present document. ETSI ETSI TS 101 883 V4.1.1 (2003-12) 8 CC CC CC CC CC CC User-Service Profile User Profile BC BC BC BC BC BC MC MC MC SC CR TRM TRM TRM SC Media Bearer Call control Service control Service IP Transport Plane QoSP SC CR QoSP SC TREG TREG SREG SREG HREG HREG Note S2 S2 S3 R1 R2 S4 SC2’ C1 C2 C3 C1 C3 C2 M1 M3 M2 S1 S1 SC1 SC2 S3 S4 N2 N3 N1 T1 T2 T2 AS5 AS5 SCN plane Terminal FG Accounting Accounting Management plane Gateway FG Network FG SC2 ABM ABAC ABM ABAC IREG IREG R2 Figure 1: Scope of the present document
|
101 882
|
<empty>
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/101882/01.01.01_60/ts_101882v010101p.pdf
|
The present document specifies behavioural models in UML for each of the service capabilities defined in TR 101 878 [1]. The requirements expressed in the present document applies to all TIPHON compliant products.
|
101 882-4
|
<empty>
|
TS
|
4.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10188204/04.01.01_60/ts_10188204v040101p.pdf
|
The present document defines the stage 1 and stage 2 (as defined by ITU-T Recommendation I.130 [6]) requirement for the media control service required by TIPHON Release 4.
|
101 882-3
|
<empty>
|
TS
|
4.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10188203/04.01.01_60/ts_10188203v040101p.pdf
|
The present document defines the stage 1 and stage 2 requirements (as defined by ITU-T Recommendation I.130 [4]) for the simple call service required by TIPHON. The simple call service defined, refers to a single media call only.
|
101 883
|
<empty>
|
TS
|
4.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/101883/04.01.01_60/ts_101883v040101p.pdf
|
The present document describes how the H.323 [1] protocol suite can be used to implement the architecture, defined in TS 101 882 part 1 [8] to part 5 [12]. The present document defines the mapping of the following services: • Registration and Service Attachment service; • Simple Call service; • Media Control Service; and • Transport control service. The present document is applicable to equipment performing the roles of terminal, gateway, gatekeeper, AuF, VLF, HLF, MT, BE and also to entities within the IP network that are necessary to support TIPHON Release 4. The H.323 profile contained in the present document was derived by examination of: • ITU-T Recommendation H.323 [1] and associated suite of protocols: - H.225.0 (RAS and Q.931); - H.245 (Media control channel-signalling protocol); - H.501 (Mobility and Collaboration procedures - Overview of Mobility and Collaboration, definitions, protocols and procedures); - H.510 (Mobility and Collaboration procedures - Mobility for H-Series multimedia systems and services); - H.235 (Security and encryption for H-series (H.323 and other H.245-based) multimedia terminals); and - H.530 (Mobility and Collaboration procedures - Security for mobile multimedia systems and services) • the capabilities required by TS 101 878 [14] for the support of TIPHON; • end-to-end Quality of Service in TS 102 024-3 [15]; • the TIPHON baseline architecture described in TS 101 314 [13]; and • the primitives, parameters and procedures defined in ETSI TS 101 882-1 [8]. Figure 1 is derived from TS 101 314 [13] and illustrates the scope of the present document. ETSI ETSI TS 101 883 V4.1.1 (2003-12) 8 CC CC CC CC CC CC User-Service Profile User Profile BC BC BC BC BC BC MC MC MC SC CR TRM TRM TRM SC Media Bearer Call control Service control Service IP Transport Plane QoSP SC CR QoSP SC TREG TREG SREG SREG HREG HREG Note S2 S2 S3 R1 R2 S4 SC2’ C1 C2 C3 C1 C3 C2 M1 M3 M2 S1 S1 SC1 SC2 S3 S4 N2 N3 N1 T1 T2 T2 AS5 AS5 SCN plane Terminal FG Accounting Accounting Management plane Gateway FG Network FG SC2 ABM ABAC ABM ABAC IREG IREG R2 Figure 1: Scope of the present document
|
101 868
|
Services and Protocols for Advanced Networks (SPAN); Recommended V5 PSTN mapping
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/101868/01.01.01_60/ts_101868v010101p.pdf
|
The present document gives guidance to operators and suppliers in cases where no national PSTN mapping already exists. It describes the translation of signalling from analogue telephone to V5 interface PSTN signalling protocol. In order to meet most national requirements it is designed in a flexible way. In addition, the document attempts to minimize the differences between the various national PSTN mappings. It covers all cases of basic service and presents some examples for special service. The purpose of the present document is to describe the recommended usage of the various messages provided by the V5 PSTN signalling protocol. Only a subset of the described procedures is needed to define a national PSTN mapping. The present document does not prohibit the use of other existing variants. The present document is applicable to access arrangements where the analogue telephone type is supported and an Access Network (AN) is connected to a Local Exchange (LE) via a V5 interface. The analogue telephone type connected to PBXes is not covered in the present document.
|
101 888
|
<empty>
|
TS
|
4.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/101888/04.02.01_60/ts_101888v040201p.pdf
|
The scope of the present document is to define the security test specifications for TIPHON Release 4 for the H.323 [5] environment. The security methods considered in the present document are related only to IP based networks. The signalling path and the media path in the SCN is considered to be secure ("Trust by wire"). This security test specification does not explain recommendation H.235 [2] and the annexes, nor does it explain how to implement the security procedures. For further information on H.235, please refer to [2] or [4]. Rather, the present document provides a step-wise implementation approach showing example security message processing along with the generated output.
|
101 878
|
Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON) Release 3; Service Capability Definition; Service Capabilities for a simple call
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/101878/01.01.01_60/ts_101878v010101p.pdf
|
The present document, specifies the requirements for the range of service capabilities necessary to implement the services identified in TR 101 301 [1]. Service capabilities are invoked either singly or in combination by independent applications to construct recognized or novel communication services. The requirements expressed in the present document apply to all TIPHON-compliant products and are realized in the service capability meta-protocols specified in TS 101 882 [2].
|
101 875
|
Methods for Testing and Specification (MTS); The Tree and Tabular Combined Notation version 3 TTCN-3: Library of Additional Predefined Functions
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/101875/01.01.01_60/ts_101875v010101p.pdf
|
The present document defines additional pre-defined functions that may be used in the TTCN-3 test language defined in ES 201 873-1.
|
101 871-1
|
Digital Enhanced Cordless Telecommunications (DECT); Application Specific Access Profile (ASAP); DECT Multimedia Access Profile (DMAP); Profile requirement list and profile specific Implementation Conformance Statement (ICS) proforma; Part 1: Portable radio Termination (PT)
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10187101/01.02.01_60/ts_10187101v010201p.pdf
|
The present document provides the Profile requirement list and profile specific Implementation Conformance Statement proforma for the Digital Enhanced Cordless Telecommunications Multimedia Access Profile (DMAP), Application Specific Access Profile (ASAP) at the Portable radio Termination as defined in EN 301 650 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [5].
|
101 869-2
|
Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Services (DPRS); Profile requirement list and profile specific Implementation Conformance Statement (ICS) proforma; Part 2: Fixed radio Termination (FT)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10186902/01.01.01_60/ts_10186902v010101p.pdf
|
The present document provides the Implementation Conformance Statement (ICS) proforma for the Digital Enhanced Cordless Telecommunications Packet Radio Service (DPRS) at the Fixed radio Termination as defined in EN 301 649 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [11] and ETS 300 406 [19]. The supplier of an implementation which is claimed to conform to EN 301 649 [1] is required to complete a copy of the ICS proforma provided in the annexes A to I of the present document.
|
101 884-1
|
<empty>
|
TS
|
4.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10188401/04.01.01_60/ts_10188401v040101p.pdf
|
The present document describes how the SIP protocol [9] completed with correlated protocols like SDP [11], HTTP [12] can be a candidate for TIPHON release 4 according to guidelines given in TS 101 315 Release 4 (see bibliography) and TS 101 315 Release 3 [2]. The SIP profile is derived from the examination of the following TIPHON Release 4 documents: • the TIPHON baseline architecture described in TS 101 314 [1]; • the capabilities service required by TS 101 878 (see bibliography); • the Meta-protocol as defined in multi part document TS 101 882-1 [5], TS 101 882-2 [6], TS 101 882-3 (see bibliography), TS 101 882-4 (see bibliography) and TS 101 882-5 [7]; • the end-to-end Quality of Service defined in TS 102 024-3 [3]; • the Security service defined in TS 102 165-1 [4]. The mapping of Meta-Protocol to SIP is limited to the following parts, while other parts are not available yet like supplementary services: • Registration Meta-Protocol [6]; • Simple Call Meta-Protocol (TS 101 882-3 - see bibliography); • Media Control Meta-Protocol (TS 101 882-4 - see bibliography); • the end-to-end Quality of Service defined in TS 102 024-3 [3]; • IETF RFC 3261: "SIP: Session Initiation Protocol" [9]; • IETF RFC 2327: "SDP: Session Description Protocol" [11]; • IETF RFC 2616: "Hypertext Transfer Protocol - HTTP/1.1" [12]; • IETF RFC 2617: "HTTP Authentication: Basic and Digest Authentication" (see bibliography); Furthermore the following documents have been consulted for information: • TS 124 229: "IP Multimedia Call Control Protocol based on SIP and SDP" (see bibliograpy); • TS 124 228: "Signalling flows for the IP multimedia call control based on SIP and SDP" [8]. ETSI ETSI TS 101 884-1 V4.1.1 (2003-08) 7
|
101 882-1
|
<empty>
|
TS
|
4.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10188201/04.01.01_60/ts_10188201v040101p.pdf
|
The present document defines by means of an information model, a functional entity behavioural model, and by validated SDL a model of the abstract behaviour of each service and service capability identified as being essential in TIPHON R4. The present document defines the method of defining a meta-protocol using a worked example for clarification. In addition the present document defines the approach to be used to identify the mapping of any candidate protocol to the meta-protocol.
|
101 863-5
|
Digital Enhanced Cordless Telecommunications (DECT); DECT/UMTS Interworking Profile (IWP); Part 5: SMS point-to-point and cell broadcast
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10186305/01.01.01_60/ts_10186305v010101p.pdf
|
The present document specifies the Digital Enhanced Cordless Telecommunications (DECT) access protocols and Fixed Part (FP) and Portable Part (PP) interworking/mappings necessary to ensure that the Universal Mobile Telecommunication System (UMTS) SMS point-to-point and cell broadcast services can be provided over DECT. To enable DECT terminals to interwork with DECT systems which are connected to the UMTS infrastructure, from the DECT side of the present document is based on EN 300 444 [15] and on the DECT Common Interface specification EN 300 175 parts 1 [1] to 8 [8] (for the cases not covered by Generic Access Profile (GAP)), from UMTS side the present document assumes interworking with UMTS specification release 1999. An air-interface profile is specified for a particular set of UMTS services so that inter-operability of DECT equipment for these services can be achieved. Interworking functions/mappings are specified for attachment for the DECT FP as the FP is using the Iu-interface towards the UMTS core network in the respect that the FP emulates a UTRAN Radio Network Controller (RNC). A PP conforming to the present document should be capable of distinguishing a FP conforming to the present document from a FP conforming to the GAP and to access and react upon it accordingly.
|
101 863-4
|
Digital Enhanced Cordless Telecommunications (DECT); DECT/UMTS Interworking Profile (IWP); Part 4: Supplementary services
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10186304/01.01.01_60/ts_10186304v010101p.pdf
|
The present document specifies the Digital Enhanced Cordless Telecommunications (DECT) access protocols and Fixed Part (FP) and Portable Part (PP) interworking/mappings necessary to ensure that the Universal Mobile Telecommunication System (UMTS) supplementary services can be provided over DECT. To enable DECT terminals to interwork with DECT systems which are connected to the UMTS infrastructure, from the DECT side of the present document is based on EN 300 444 [18] and on the DECT Common Interface specification EN 300 175 parts 1 [1] to 8 [8] (for the cases not covered by Generic Access Profile (GAP)), from UMTS side the present document assumes interworking with UMTS specification release 1999. An air-interface profile is specified for a particular set of UMTS services so that inter-operability of DECT equipment for these services can be achieved. Interworking functions/mappings are specified for attachment for the DECT FP as the FP is using the Iu-interface towards the UMTS core network in the respect that the FP emulates a UTRAN Radio Network Controller (RNC). A PP conforming to the present document should be capable of distinguishing a FP conforming to the present document from a FP conforming to the GAP and to access and react upon it accordingly.
|
101 863-3
|
Digital Enhanced Cordless Telecommunications (DECT); DECT/UMTS Interworking Profile (IWP); Part 3: 3,1 kHz speech service
|
TS
|
1.1.2
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10186303/01.01.02_60/ts_10186303v010102p.pdf
|
The present document specifies the Digital Enhanced Cordless Telecommunications (DECT) access protocols and Fixed Part (FP) and Portable Part (PP) interworking/mappings necessary to ensure that the Universal Mobile Telecommunication System (UMTS) services can be provided over DECT. To enable DECT terminals to interwork with DECT systems which are connected to the UMTS infrastructure, from the DECT side of the present document is based on EN 300 444 [13] and on the DECT Common Interface specification EN 300 175 parts 1 [1] to 8 [8] (for the cases not covered by Generic Access Profile (GAP)), from UMTS side the present document assumes interworking with UMTS specification release 1999 and later. An air-interface profile is specified for a particular set of UMTS services so that inter-operability of DECT equipment for these services can be achieved. Interworking functions/mappings are specified for Mobile Switching Centre (MSC) attachment for the DECT FP as the FP is using the Iu-interface towards the UMTS core network in the respect that the FP emulates a UTRAN Radio Network Controller (RNC) with regards to the UTRAN messages which are relevant to the present document. Interworking functions/mappings for the PP are specified for MSC environment. The provision of the (UMTS) Subscriber Identity Module (SIM, USIM) and DECT Authentication Module (DAM) within the DECT portable are also considered. UMTS interfaces to non-UMTS networks are out of the scope of the present document.
|
101 863-2
|
Digital Enhanced Cordless Telecommunications (DECT); DECT/UMTS Interworking Profile (IWP); Part 2: CN-FP interworking
|
TS
|
1.1.2
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10186302/01.01.02_60/ts_10186302v010102p.pdf
|
The present document specifies the Digital Enhanced Cordless Telecommunications (DECT) access protocols and Fixed Part (FP) and Portable Part (PP) interworking/mappings necessary to ensure that the Universal Mobile Telecommunication System (UMTS) services can be provided over DECT. To enable DECT terminals to interwork with DECT systems which are connected to the UMTS infrastructure, from the DECT side of the present document is based on EN 300 444 [10] and on the DECT Common Interface specification EN 300 175 parts 1 [1] to 8 [8] (for the cases not covered by Generic Access Profile (GAP)), from UMTS side the present document assumes interworking with UMTS specification release 1999+. An air-interface profile is specified for a particular set of UMTS services so that inter-operability of DECT equipment for these services can be achieved. Interworking functions/mappings are specified for Mobile Switching Centre (MSC attachment for the DECT FP as the FP is using the Iu-interface towards the UMTS core network in the respect that the FP emulates a UTRAN Radio Network Controller (RNC) with regards to the UTRAN messages which are relevant to the present document. Interworking functions/mappings for the PP are specified for MSC environment. The provision of the (UMTS) Subscriber Identity Module (SIM, USIM) and DECT Authentication Module (DAM) within the DECT portable are also considered. UMTS interfaces to non-UMTS networks are out of the scope of the present document.
|
101 863-1
|
Digital Enhanced Cordless Telecommunications (DECT); DECT/UMTS Interworking Profile (IWP); Part 1: General description and overview
|
TS
|
1.1.2
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10186301/01.01.02_60/ts_10186301v010102p.pdf
|
The present document specifies the Digital Enhanced Cordless Telecommunications (DECT) access protocols and Fixed Part (FP) and Portable Part (PP) interworking/mappings necessary to ensure that the Universal Mobile Telecommunication System (UMTS) services can be provided over DECT. To enable DECT terminals to interwork with DECT systems which are connected to the UMTS infrastructure, from the DECT side of the present document is based on EN 300 444 [14] and on the DECT Common Interface specification EN 300 175 parts 1 [1] to 8 [8] (for the cases not covered by Generic Access Profile (GAP)), from UMTS side the present document assumes interworking with UMTS specification release 1999 and later. An air-interface profile is specified for a particular set of UMTS services so that inter-operability of DECT equipment for these services can be achieved. Interworking functions/mappings are specified for Mobile Switching Centre (MSC) attachment for the DECT FP as the FP is using the Iu-interface towards the UMTS core network in the respect that the FP emulates a UTRAN Radio Network Controller (RNC) with regards to the UTRAN messages which are relevant to the present document. Interworking functions/mappings for the PP are specified for MSC environment. The provision of the (UMTS) Subscriber Identity Module (SIM, USIM) and DECT Authentication Module (DAM) within the DECT portable are also considered. UMTS interfaces to non-UMTS networks are out of the scope of the present document.
|
101 860
|
Digital Audio Broadcasting (DAB); Distribution Interfaces; Service Transport Interface (STI); STI levels
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/101860/01.02.01_60/ts_101860v010201p.pdf
|
The present document establishes guidance in implementation and usage of the functionality described in the STI standard ETSI EN 300 797 [2]. Subsets of the STI standard, called STI Levels, are defined in order to make interoperable solutions possible for different suppliers of STI devices. The present document defines the minimum functionality an upstream or downstream entity provides on each level to be considered compliant with that level. This version of the present document is aligned with V2.1.1 of ETSI EN 300 401 [1].
|
101 867
|
Powerline Telecommunications (PLT); Coexistence of Access and In-House Powerline Systems
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/101867/01.01.01_60/ts_101867v010101p.pdf
|
The present document defines the technical mechanism for co-existence between access and inhouse systems or to be more precisely in reference to the Network Architecture Model, the co-existence of the interfaces IP-yL (interface between access Head End and Network Termination Low Voltage) and IP-yP (interface between inhouse Central Node and Network Termination Premises or between several Network Termination Premises). The co-existence between inhouse systems of different vendors is not within the scope of the present document and will be handled in a separate document. From the legal aspect, the scope of the present document deals with the coexistence between a power line communication system intended for consumer usage (home, apartment, SOHO) where the powerlines are privately owned, and a power line system owned and operated by an administrative entity. The aim of the present document is to avoid interference between these 2 groups of legal owners by technical measures when appropriate mutual agreements between both parties have not been reached. In the presence of mutual agreements, the present document is not applicable. PLC systems, both access and inhouse, defined in the present document share the spectrum between 1,6 and 30 MHz. Although frequency planning with access systems could possibly be done by operators or power utilities, frequency planning with inhouse systems is difficult to coordinate as inhouse systems are consumer goods supplied by many different manufacturers. Therefore a mechanism is needed to ensure that interference between access and inhouse is avoided. The present document is applicable to PLC systems for both services, access and inhouse, through all possible generations.
|
101 863-6
|
Digital Enhanced Cordless Telecommunications (DECT); DECT/UMTS Interworking Profile (IWP); Part 6: Packet switched data
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10186306/01.01.01_60/ts_10186306v010101p.pdf
|
The present document specifies the Digital Enhanced Cordless Telecommunications (DECT) access protocols and Fixed Part (PF) and Portable Part (PT) interworking/mappings necessary to ensure that the Universal Mobile Telecommunication System (UMTS) General Packet Radio Service (GPRS) can be provided over DECT. To enable DECT terminals to interwork with DECT systems which are connected to the UMTS infrastructure, from the DECT side the present document is based on DECT Packet Radio Services EN 301 649 [16] and on the DECT Common Interface specification EN 300 175 parts 1 to 8 [1] to [8] (for the cases not covered by DPRS), from UMTS side the present document assumes interworking with UMTS specification release 4. An air-interface profile is specified for a particular set of UMTS services so that inter-operability of DECT equipment for these services can be achieved. Interworking functions/mappings are specified for Serving GPRS Support Node (SGSN) attachment for the DECT FT as the FT is using the Iu (PS)-interface towards the UMTS core network in the respect that the FT emulates an UTRAN Radio Network Controller (RNC) with regards to the UTRAN messages which are relevant to the present document. The present document is based on GPRS as described in TS 123 060 [22], it covers TS 124 008 [24] and TS 125 410 [25] as far as mapping is concerned and as far as this is required for support of packet switched data services. On the DECT side the TS covers DPRS as defined in EN 301 649 [16].
|
101 878
|
<empty>
|
TS
|
4.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/101878/04.01.01_60/ts_101878v040101p.pdf
|
The present document, specifies the requirements for the range of service capabilities necessary to implement the services identified in TR 101 301 [1]. Service capabilities are invoked either singly or in combination by independent applications to construct recognized or novel communication services. The requirements expressed in the present document apply to all TIPHON-compliant products and are realized in the service capability meta-protocols specified in TS 101 882 [2].
|
101 884
|
<empty>
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/101884/01.01.01_60/ts_101884v010101p.pdf
|
The present document describes how the SIP and SDP protocols can be used to implement TIPHON architecture, as defined in [5], and the Context and Behaviour of Meta-Protocol, as defined in [7]. The scope of the present document is limited to the mapping of the following parts of Meta-Protocol to SIP: • Registration Meta-Protocol; • Call Control Meta-Protocol; • Bearer Control Meta-Protocol. The present document is applicable to equipment performing the roles of terminal, Registration server, proxy Application Server, and gateway, and also to entities within the IP network that are necessary to support the TIPHON Release 3.
|
101 871-2
|
Digital Enhanced Cordless Telecommunications (DECT); Application Specific Access Profile (ASAP); DECT Multimedia Access Profile (DMAP); Profile requirement list and profile specific Implementation Conformance Statement (ICS) proforma; Part 2: Fixed radio Termination (FT)
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10187102/01.02.01_60/ts_10187102v010201p.pdf
|
The present document provides the Profile requirement list and profile specific Implementation Conformance Statement proforma for the Digital Enhanced Cordless Telecommunications Multimedia Access Profile (DMAP), Application Specific Access Profile (ASAP) at the Fixed radio Termination as defined in EN 301 650 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [5].
|
101 882-2
|
<empty>
|
TS
|
4.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10188202/04.01.01_60/ts_10188202v040101p.pdf
|
The present document defines by means of an information model, a functional entity behavioural model, and by validated SDL a model of the abstract behaviour of each service and service capability identified as being essential in TIPHON Release 4. The present document defines the meta-protocol requirement for the registration and service attachment services in TIPHON.
|
101 869-1
|
Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Services (DPRS); Profile requirement list and profile specific Implementation Conformance Statement (ICS) proforma; Part 1: Portable radio Termination (PT)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10186901/01.01.01_60/ts_10186901v010101p.pdf
|
The present document provides the Implementation Conformance Statement (ICS) proforma for the Digital Enhanced Cordless Telecommunications Packet Radio Service (DPRS) at the Fixed radio Termination as defined in EN 301 649 [1] in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 [11] and ETS 300 406 [19]. The supplier of an implementation which is claimed to conform to EN 301 649 [1] is required to complete a copy of the ICS proforma provided in the annexes A to I of the present document.
|
101 859-3
|
Digital Enhanced Cordless Telecommunications (DECT); DECT Multimedia Access Profile (DMAP); Application Specific Access Profile (ASAP); Profile Test Specification (PTS); Part 3: Profile Specific Test Specification (PSTS) - Fixed radio Termination (FT)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10185903/01.01.01_60/ts_10185903v010101p.pdf
|
The present document contains the test specification for DECT Multimedia Access Profile (DMAP), Application Specific Access Profile (ASAP); Fixed Part (FP) applications. The main objective of the ASAP test specification is to provide tests giving a high probability of air interface inter-operability between different manufacturer's equipment in different environments (i.e. public, business and residential). The ISO standard for the methodology of conformance testing ISO/IEC 9646 Parts 1 to 7 [12] to [18] is used as the basis for the test methodology, and as the basis for the test case specification. This is considered to be unsuitable for Physical layer testing, and therefore a text description is used. The test cases listed in the present document have been derived from the DECT Packet Radio Service (DPRS); Test Case Library (TCL) [21] to [26]. In addition as far as the Physical layer is concerned EN 300 176 [19] applies. Additional ASAP specific test cases are included where required. The Profile IXIT is based on the DECT DPRS PIXITs specified in EN 301 469 [21] to [26].
|
101 859-2
|
Digital Enhanced Cordless Telecommunications (DECT); DECT Multimedia Access Profile (DMAP); Application Specific Access Profile (ASAP); Profile Test Specification (PTS); Part 2: Profile Specific Test Specification (PSTS) Portable radio Termination (PT)
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10185902/01.01.01_60/ts_10185902v010101p.pdf
|
The present document contains the test specification for DECT Multimedia Access Profile (DMAP), Application Specific Access Profile (ASAP), Portable Part (PP) applications. The main objective of the ASAP test specification is to provide tests giving a high probability of air interface inter-operability between different manufacturer's equipment in different environments (i.e. public, business and residential). The ISO standard for the methodology of conformance testing ISO/IEC 9646 Parts 1 to 7 [12] to [18] is used as the basis for the test methodology, and as the basis for the test case specification. This is considered to be unsuitable for Physical layer testing, and therefore a text description is used. The test cases listed in the present document have been derived from the DECT Packet Radio Service (DPRS); Test Case Library (TCL) [21] to [29]. In addition as far as the Physical layer is concerned EN 300 176 [19] applies. Additional ASAP specific test cases are included where required. The Profile IXIT is based on the DECT DPRS PIXITs specified in EN 301 469 [21] to [29].
|
101 859-1
|
Digital Enhanced Cordless Telecommunications (DECT); DECT Multimedia Access Profile (DMAP); Application Specific Access Profile (ASAP); Profile Test Specification (PTS); Part 1: Summary
|
TS
|
1.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10185901/01.01.01_60/ts_10185901v010101p.pdf
|
The present document specifies the Profile Test Specification (PTS) summary referencing all the specifications necessary for the conformance testing of the DECT Multimedia Access Profile (DMAP), Application Specific Access Profile (ASAP). The present document, together with the specifications it references, constitutes the ASAP PTS. The present document has the following structure: • Clause 4 contains general information relative to the profile including references to the related specifications; • Clause 5 contains a summary and references to the specifications relevant for each of DECT protocol layers to be tested.
|
101 852-2-3
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Cell based Convergence Layer; Part 2: UNI Service Specific Convergence Sublayer (SSCS); Sub-part 3: Abstract Test Suite (ATS) specification
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018520203/01.02.01_60/ts_1018520203v010201p.pdf
|
The present document contains the Abstract Test Suite (ATS) to test the TS 101 763-2 [2]. The objective of the present document is to provide a basis for conformance tests for BRAN HIPERLAN type 2 equipment giving a high probability of air interface inter-operability between different manufacturers BRAN HIPERLAN type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [5] and ISO/IEC 9646-2 [6]) as well as the ETSI rules for conformance testing (ETS 300 406 [4]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of the ATS. Annex B provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) proforma of the MT side ATS. Annex C provides the Partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma of the AP side ATS. Annex D provides the Protocol Conformance Test Report (PCTR) proforma of the MT side ATS. Annex E provides the Protocol Conformance Test Report (PCTR) proforma of the AP side ATS.
|
101 852-2-2
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Cell based Convergence Layer; Part 2: UNI Service Specific Convergence Sublayer (SSCS); Sub-part 2: Test Suite Structure and Test Purposes (TSS&TP) specification
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018520202/01.02.01_60/ts_1018520202v010201p.pdf
|
The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test TS 101 763-2 [2]. The objective of the present document is to provide a basis for conformance tests for Broadband Radio Access Network (BRAN) HIPERLAN type 2 equipment giving a high probability of air interface inter-operability between different manufacturers BRAN HIPERLAN type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [4] and ISO/IEC 9646-2 [5]) as well as the ETSI rules for conformance testing (ETS 300 406 [3]) are used as a basis for the test methodology.
|
101 851-4-2
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 4: Physical layer procedures; Sub-part 2: A-family (S-UMTS-A 25.214)
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510402/02.01.01_60/ts_1018510402v020101p.pdf
|
The present document specifies the characteristics of the physical layer procedures used for family A of the satellite component of UMTS (S-UMTS-A). It is based on the FDD mode of UTRA defined by TS 125 211 [2], TS 125 212 [3], TS 125 213 [4], TS 125 214 [5] and adapted for operation over satellite transponders.
|
101 852-1-3
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Cell based Convergence Layer; Part 1: Common part; Sub-part 3: Abstract Test Suite (ATS) specification
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018520103/01.02.01_60/ts_1018520103v010201p.pdf
|
The present document contains the Abstract Test Suite (ATS) to test the Broadband Radio Access Networks (BRAN) HIPERLAN Type 2; Cell based Convergence Layer; Part 1: Common part. The objective of the present document is to provide a basis for conformance tests for Broadband Radio Access Networks (BRAN) HIPERLAN Type 2 equipment giving a high probability of air interface inter-operability between different manufacturers BRAN HIPERLAN Type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [4] and ISO/IEC 9646-2 [5]) as well as the ETSI rules for conformance testing (ETS 300 406 [3]) are used as a basis for the test methodology. Annex A provides the Tree and Tabular Combined Notation (TTCN) part of the ATS. Annex B provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the MT side ATS. Annex C provides the Partial Protocol Implementation Extra Information for Testing (PIXIT) Proforma of the AP side ATS. Annex D provides the Protocol Conformance Test Report (PCTR) Proforma of the MT side ATS. Annex E provides the Protocol Conformance Test Report (PCTR) Proforma of the AP side ATS.
|
101 852-1-2
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Cell based Convergence Layer; Part 1: Common part; Sub-part 2: Test Suite Structure and Test Purposes (TSS&TP) specification
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018520102/01.02.01_60/ts_1018520102v010201p.pdf
|
The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test the Broadband Radio Access Networks (BRAN) HIPERLAN Type 2; Cell based Convergence Layer; Part 1: Common Part. The objective of the present document is to provide a basis for conformance tests for Broadband Radio Access Networks (BRAN) HIPERLAN type 2 equipment giving a high probability of air interface inter-operability between different manufacturers BRAN HIPERLAN type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [3] and ISO/IEC 9646-2 [4]) as well as the ETSI rules for conformance testing (ETS 300 406 [2]) are used as a basis for the test methodology.
|
101 852-1-1
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Cell based Convergence Layer; Part 1: Common part; Sub-part 1: Protocol Implementation Conformance Statement (PICS) proforma
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018520101/01.02.01_60/ts_1018520101v010201p.pdf
|
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for TS 101 763-1 [1] in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [4] and ETS 300 406 [2]. It details in tabular form the implementation options, i.e. the optional functions additional to those which are mandatory to implement.
|
101 851-6-1
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 6: Ground stations and space segment radio transmission and reception; Sub-part 1: G-family (S-UMTS-G 25.104)
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510601/02.01.01_60/ts_1018510601v020101p.pdf
|
The present document specifies the satellite, gateway and Complementary Ground Components (CGCs) minimum RF characteristics and ground station performance of S-UMTS interface G.
|
101 851-5-1
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 5: UE Radio Transmission and Reception; Sub-part 1: G-family (S-UMTS-G 25.101)
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510501/02.01.01_60/ts_1018510501v020101p.pdf
|
The present document is to establish the minimum RF characteristics for the User Equipment (UE).
|
101 851-3
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT2000; G-family; Part 3: Spreading and modulation (S-UMTS-A 25.213)
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10185103/01.02.01_60/ts_10185103v010201p.pdf
|
The present document describes spreading and modulation for the Physical Layer for family G of the satellite component of UMTS (S-UMTS-G). It is based on the FDD mode of UTRA defined by TS 125 211 [1], TS 125 212 [2], TS 125 213 [3], TS 125 214 [4] and adapted for operation over satellite transponders.
|
101 851-4-3
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 4: Physical layer procedures; Sub-part 3: G-family enhancements (S-UMTS-G enhanced 25.214)
|
TS
|
3.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510403/03.02.01_60/ts_1018510403v030201p.pdf
|
The present document specifies the characteristics of the physical layer procedures used for family G enhanced of the satellite component of UMTS (S-UMTS-G). It is based on the FDD mode of UTRA defined by TS 125 211 [4], TS 125 212 [i.1], TS 125 213 [i.2], TS 125 215 [i.3], TS 125 214 [5], TS 125 331 [i.4] and TS 125 433 [6] and adapted for operation over satellite transponders. Furthermore, it specifies enhancing features optimizing the basic G family radio interface performances over satellite and new functions.
|
101 851-2-3
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 2: Multiplexing and channel coding; Sub-part 3: G-family enhancements (S-UMTS-G enhanced 25.212)
|
TS
|
3.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510203/03.02.01_60/ts_1018510203v030201p.pdf
|
The present document describes the characteristics of the Layer 1 multiplexing and channel coding used for family G enhanced of the satellite component of UMTS (S-UMTS-G enhanced). It is based on the FDD mode of UTRA defined by TS 125 211 [i.1], TS 125 212 [i.2], TS 125 213 [i.3] and TS 125 214 [i.4] and adapted for operation over satellite transponders. Furthermore, it specifies enhancing features optimizing the basic G family radio interface performances over satellite and new functions.
|
101 851-4-1
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 4: Physical layer procedures; Sub-part 1: G-family (S-UMTS-G 25.214)
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510401/02.01.01_60/ts_1018510401v020101p.pdf
|
The present document specifies the characteristics of the physical layer procedures used for family G of the satellite component of UMTS (S-UMTS-G). It is based on the FDD mode of UTRA defined by TS 125 211 [4], TS 125 212 [9], TS 125 213 [10], TS 125 215 [11], TS 125 214 [5], TS 125 331 [12] and TS 125 433 [6] and adapted for operation over satellite transponders.
|
101 852-2-1
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Cell based Convergence Layer; Part 2: UNI Service Specific Convergence Sublayer (SSCS); Sub-part 1: Procotol Implementation Conformance Statement (PICS) proforma
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018520201/01.02.01_60/ts_1018520201v010201p.pdf
|
The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for the TS 101 763-2 [1] in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 [4] and ETS 300 406 [2]. It details in tabular form the implementation options, i.e. the optional functions additional to those which are mandatory to implement.
|
101 851-2
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT2000; G-family; Part 2: Multiplexing and channel coding (S-UMTS-A 25.212)
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10185102/01.02.01_60/ts_10185102v010201p.pdf
|
The present document describes the characteristics of the Layer 1 multiplexing and channel coding used for family G of the satellite component of UMTS (S-UMTS-G). It is based on the FDD mode of UTRA defined by TS 125 211 [4], TS 125 212 [5], TS 125 213 [6] and TS 125 214 [7] and adapted for operation over satellite transponders.
|
101 851-1-3
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 1: Physical channels and mapping of transport channels into physical channels; Sub-part 3: G-family enhancements (S-UMTS-G enhanced 25.211)
|
TS
|
3.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510103/03.02.01_60/ts_1018510103v030201p.pdf
|
The present document defines the Layer 1 transport channels and physical channels used for family G enhanced of the satellite component of UMTS (S-UMTS-G enhanced). It is based on the FDD mode of UTRA defined by TS 125 201 [4], TS 125 211 [i.1], TS 125 302 [5] and TS 125 435 [6] and adapted for operation over satellite transponders. Furthermore, it specifies enhancing features optimizing the basic G-family radio interface performances over satellite and new functions.
|
101 851-1-2
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 1: Physical channels and mapping of transport channels into physical channels; Sub-part 2: A-family (S-UMTS-A 25.211)
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510102/02.01.01_60/ts_1018510102v020101p.pdf
|
The present document defines the Layer 1 transport channels and physical channels used for family A of the satellite component of UMTS (S-UMTS-A). It is based on the FDD mode of UTRA defined by TS 125 211 [4], TS 125 212 [5], TS 125 213 [6], TS 125 214 [7] and adapted for operation over satellite transponders.
|
101 851-3-1
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 3: Spreading and modulation; Sub-part 1: G-family (S-UMTS-G 25.213)
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510301/02.01.01_60/ts_1018510301v020101p.pdf
|
The present document describes spreading and modulation for the Physical Layer for family G of the satellite component of UMTS (S-UMTS-G). It is based on the FDD mode of UTRA defined by TS 101 851-1-1 [1], TS 101 851-2-1 [2], TS 101 851-4-1 [3] and adapted for operation over satellite transponders.
|
101 823-4-2
|
Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) layer; Part 4: Extension for Home Environment; Sub-part 2: Test Suite Structure and Test Purposes (TSS&TP) specification
|
TS
|
1.3.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018230402/01.03.01_60/ts_1018230402v010301p.pdf
|
The present document contains the Test Suite Structure (TSS) and Test Purposes (TP) to test the BRAN HIPERLAN Type 2; Data Link Control (DLC) layer; Extension for Home Environment. The objective of the present document is to provide a basis for conformance tests for BRAN HIPERLAN type 2 equipment giving a high probability of air interface inter-operability between different manufacturer's BRAN HIPERLAN type 2 equipment. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [13] and ISO/IEC 9646-2 [14]) as well as the ETSI rules for conformance testing (ETS 300 406 [12]) are used as a basis for the test methodology.
|
101 851-1
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT2000; G-family; Part 1: Physical channels and mapping of transport channels into physical channels (S-UMTS-A 25.211)
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10185101/01.02.01_60/ts_10185101v010201p.pdf
|
The present document defines the Layer 1 transport channels and physical channels used for family G of the satellite component of UMTS (S-UMTS-G). It is based on the FDD mode of UTRA defined by TS 125 201 [4], TS 125 211 [5], TS 125 302 [6] and TS 125 435 [7] and adapted for operation over satellite transponders.
|
101 851-2-1
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 2: Multiplexing and channel coding; Sub-part 1: G-family (S-UMTS-G 25.212)
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510201/02.01.01_60/ts_1018510201v020101p.pdf
|
The present document describes the characteristics of the Layer 1 multiplexing and channel coding used for family G of the satellite component of UMTS (S-UMTS-G). It is based on the FDD mode of UTRA defined by TS 125 211 [6], TS 125 212 [7], TS 125 213 [8] and TS 125 214 [9] and adapted for operation over satellite transponders.
|
101 851-4
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT2000; G-family; Part 4: Physical layer procedures (S-UMTS-A 25.214)
|
TS
|
1.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/10185104/01.02.01_60/ts_10185104v010201p.pdf
|
The present document specifies the characteristics of the physical layer procedures used for family G of the satellite component of UMTS (S-UMTS-G). It is based on the FDD mode of UTRA defined by TS 125 211 [5], TS 125 212 [6], TS 125 213 [7], TS 125 215 [8], TS 125 214 [9], TS 125 331 [10] and TS 125 433 [11] and adapted for operation over satellite transponders.
|
101 851-3-3
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 3: Spreading and modulation; Sub-part 3: G-family enhancements (S-UMTS-G enhanced 25.213)
|
TS
|
3.2.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510303/03.02.01_60/ts_1018510303v030201p.pdf
|
The present document describes spreading and modulation for the Physical Layer for family G enhanced of the satellite component of UMTS (S-UMTS-G enhanced). It is based on the FDD mode of UTRA defined by TS 101 851-1-3 [1], TS 101 851-2-3 [2], TS 101 851-4-3 [3] and adapted for operation over satellite transponders. Furthermore, it specifies enhancing features optimizing the basic G family radio interface performances over satellite and new functions.
|
101 851-3-2
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 3: Spreading and modulation; Sub-part 2: A-family (S-UMTS-A 25.213)
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510302/02.01.01_60/ts_1018510302v020101p.pdf
|
The present document defines the Layer 1 transport channels and physical channels used for family A of the satellite component of UMTS (S-UMTS-A). It is based on the FDD mode of UTRA defined by TS 125 211 [2], TS 125 212 [3], TS 125 213 [4], TS 125 214 [5] and adapted for operation over satellite transponders.
|
101 851-1-1
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 1: Physical channels and mapping of transport channels into physical channels; Sub-part 1: G-family (S-UMTS-G 25.211)
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510101/02.01.01_60/ts_1018510101v020101p.pdf
|
The present document defines the Layer 1 transport channels and physical channels used for family G of the satellite component of UMTS (S-UMTS-G). It is based on the FDD mode of UTRA defined by TS 125 201 [4], TS 125 211 [8], TS 125 302 [5] and TS 125 435 [6] and adapted for operation over satellite transponders.
|
101 851-2-2
|
Satellite Earth Stations and Systems (SES); Satellite Component of UMTS/IMT-2000; Part 2: Multiplexing and channel coding; Sub-part 2: A-family (S-UMTS-A 25.212)
|
TS
|
2.1.1
|
http://www.etsi.org/deliver/etsi_ts/101800_101899/1018510202/02.01.01_60/ts_1018510202v020101p.pdf
|
The present document describes the characteristics of the Layer 1 multiplexing and channel coding used for family A of the satellite component of UMTS (S-UMTS-A). It is based on the FDD mode of UTRA defined by TS 125 211 [2], TS 125 212 [3], TS 125 213 [4], TS 125 214 [5] and adapted for operation over satellite transponders.
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.