id
stringlengths
7
13
title
stringlengths
7
396
type
stringclasses
2 values
version
stringclasses
245 values
url
stringlengths
90
98
scope
stringlengths
0
83.8k
103 868-2
Intelligent Transport Systems (ITS); Testing; Conformance test specifications for ITS Misbehaviour Reporting service; Part 2: Test Suite Structure and Test Purposes (TSS & TP); Release 2
TS
2.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/10386802/02.01.01_60/ts_10386802v020101p.pdf
The present document provides the Test Suite Structure and Test Purposes (TSS & TP) for ITS Misbehaviour Reporting service as specified in ETSI TS 103 759 [1] in accordance with the relevant guidance given in ISO/IEC 9646-7 [i.6]. The ISO standard for the methodology of conformance testing (ISO/IEC 9646-1 [i.3] and ISO/IEC 9646-2 [i.4]) as well as the ETSI rules for conformance testing (ETSI ETS 300 406 [i.7]) are used as a basis for the test methodology.
103 868-1
Intelligent Transport Systems (ITS); Testing; Conformance test specifications for ITS Misbehaviour Reporting service; Part 1: Protocol Implementation Conformance Statement (PICS); Release 2
TS
2.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/10386801/02.01.01_60/ts_10386801v020101p.pdf
The present document provides the Protocol Implementation Conformance Statement (PICS) pro forma for the test specifications for ITS Misbehaviour Reporting service as specified in ETSI TS 103 759 [1] and in accordance with the relevant guidance given in ISO/IEC 9646-7 [i.2] and ETSI ETS 300 406 [i.3].
103 864
Cyber Security; Security Threats and related Requirements for Consumer Sensor Hubs
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/103864/01.01.01_60/ts_103864v010101p.pdf
The present document describes the security threats and specifies the related security requirements of sensor hubs used in consumer devices. The present document focuses on hardware implementations of a sensor hub regardless if it is implemented on a dedicated chip or as a part of a SoC. It provides a set of requirements applicable to a sensor hub regardless if it will be evaluated as a single component or as part of a product. Existing standards related to a product in which the sensor hub is integrated (e.g. ETSI TS 103 732 [1] or ETSI EN 303 645 [2]) can be used to evaluate the product while being complemented by the sensor hub's specific requirements defined in the present document. The present document is considering only sensors that are integrated in the same device as the sensor hub; the case where a sensor is physically separate from the sensor hub and it is connected to it through a wired or wireless interface is out of scope.
103 863
Maritime mobile broadband communication links; Radio transmitters and receivers employing integrated beamforming phased array antennas operating in the 5 GHz to 8 GHz frequency range
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/103863/01.01.01_60/ts_103863v010101p.pdf
The present document specifies technical characteristics and methods of measurements for radio transmitters and receivers utilizing integrated beamforming phased array antennas operating on frequencies in the 5 GHz to 8 GHz frequency range, except for 5 862 MHz and 5 890 MHz, for broadband communication links between ships and between ships and land based stations. The present document intends to provide parameters that may be useful when considering license or other permissions for use. NOTE: Operation on the frequencies 5 862 MHz and 5 890 MHz is covered by ETSI EN 303 276 [i.1].
103 859
Publicly Available Specification (PAS); O-RAN Fronthaul Control, User and Synchronization Plane Specification v12.01; (O-RAN.WG4.CUS.0-R003-v12.01)
TS
12.0.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/103859/12.00.01_60/ts_103859v120001p.pdf
The contents of the present document are subject to continuing work within O-RAN and may change following formal O-RAN approval. Should the O-RAN Alliance modify the contents of the present document, it will be re-released by O- RAN with an identifying change of version date and an increase in version number as follows: version xx.yy.zz where: xx: the first digit-group is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. (the initial approved document will have xx=01). Always 2 digits with leading zero if needed. yy: the second digit-group is incremented when editorial only changes have been incorporated in the document. Always 2 digits with leading zero if needed. zz: the third digit-group included only in working versions of the document indicating incremental changes during the editing process. External versions never include the third digit-group. Always 2 digits with leading zero if needed. The present document specifies the control plane, user plane and synchronization plane protocols used over the fronthaul interface linking the O-DU (O-RAN Distributed Unit) with the O-RU (O-RAN Radio Unit) with a Lower Layer Functional Split-7-2x based architecture (explained below). The scope of the present document includes both LTE and NR (5G). A separate document contains the O-RAN M-Plane (management plane) specification. In the following, "Layer 1" and "Physical Layer" are assumed to be synonymous.
103 859
Publicly Available Specification (PAS); O-RAN Fronthaul Control, User and Synchronization Plane Specification v7.02; (ORAN-WG4.CUS.0-v07.02)
TS
7.0.2
http://www.etsi.org/deliver/etsi_ts/103800_103899/103859/07.00.02_60/ts_103859v070002p.pdf
The contents of the present document are subject to continuing work within O-RAN and may change following formal O-RAN approval. Should the O-RAN Alliance modify the contents of the present document, it will be re-released by O- RAN with an identifying change of version date and an increase in version number as follows: version xx.yy.zz where: xx: the first digit-group is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. (the initial approved document will have xx=01). Always 2 digits with leading zero if needed. yy: the second digit-group is incremented when editorial only changes have been incorporated in the document. Always 2 digits with leading zero if needed. zz: the third digit-group included only in working versions of the document indicating incremental changes during the editing process. External versions never include the third digit-group. Always 2 digits with leading zero if needed. The present document specifies the control plane, user plane and synchronization plane protocols used over the fronthaul interface linking the O-DU (O-RAN Distributed Unit) with the O-RU (O-RAN Radio Unit) with a Lower Layer Functional Split-7-2x based architecture (explained below). The scope of the present document includes both LTE and NR (5G). A separate document contains the O-RAN M-Plane (management plane) specification. In the following, "Layer 1" and "Physical Layer" are assumed to be synonymous.
103 850
Reconfigurable Radio Systems (RRS); Definition of Radio Application Package
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/103850/01.01.01_60/ts_103850v010101p.pdf
This Technical Specification details the format of a Radio Application Package (RAP).
103 878-1
Core Network and Interoperability Testing (INT); Network Interoperability Test Description for IPv6-only services over 5G; Part 1: Test purposes
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/10387801/01.01.01_60/ts_10387801v010101p.pdf
The present document defines the Test Purpose for IPv6-only services over 5G, covers roaming and non-roaming test scenarios.
103 876
Digital Video Broadcasting (DVB); Native IP Broadcasting
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/103876/01.01.01_60/ts_103876v010101p.pdf
The present document describes a Native IP end-to-end broadcast system based on existing DVB standards.
103 874-3
DECT 2020 New Radio (NR); Application Profile; Part 3: IPv6 Profile
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/10387403/01.01.01_60/ts_10387403v010101p.pdf
Internet protocol is the most common protocol for communicating between devices, hosts and back-end systems in modern network environments. Internet-of-Things (IoT) is the integration of various devices to the Internet, enabling data collection and device control in various systems. DECT-2020, especially in mesh network topology, is well suited for IoT needs. Due to the specific features in DECT-2020 and in mesh networking more generally,the present document recommends features, operations and protocols how to best integrate the IPv6 technologies and protocols to operating over DECT-2020 radio network.
103 874-2
DECT-2020 New Radio (NR); Access Profile Part 2; Smart Metering, City and Buildings
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/10387402/01.01.01_60/ts_10387402v010101p.pdf
The present document specifies the access profile requirements and recommendations of smart metering, city and buildings as well as any other similarly applicable use case for the DECT-2020 New Radio (NR).
103 874-1
DECT-2020 New Radio (NR); Access Profile; Part 1: Overview
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/10387401/01.01.01_60/ts_10387401v010101p.pdf
The present document provides an overview of the DECT-2020 NR profiles.
103 872
Emergency Communications (EMTEL); PEMEA Service Discovery Extension
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/103872/01.01.01_60/ts_103872v010101p.pdf
The present document describes the PEMEA Service Discovery capability and the need for this functionality. The required entities and actors are identified along with the protocol, specifying message exchanges between entities. The message formats are specified and procedural descriptions of expected behaviours under different conditions are detailed.
103 871
Emergency Communications (EMTEL); PEMEA Real-Time Text Extension
TS
1.2.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/103871/01.02.01_60/ts_103871v010201p.pdf
The present document describes the PEMEA Real-Time Text (RTT) capability, and the need for this functionality. The required entities and actors are identified along with the protocol, specifying message exchanges between entities. The message formats are specified and procedural descriptions of expected behaviours under different conditions are detailed.
103 836-4-3
Intelligent Transport Systems (ITS); Vehicular Communications; GeoNetworking; Part 4: Geographical addressing and forwarding for point-to-point and point-to-multipoint communications; Sub-part 3: Media-dependent functionalities for NR-V2X PC5 and LTE-V2X PC5; Release 2
TS
2.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/1038360403/02.01.01_60/ts_1038360403v020101p.pdf
The present document specifies NR-V2X PC5 and LTE-V2X PC5 specific GeoNetworking requirements, including: • fields of the GeoNetworking address; • overall packet structure for NR-V2X PC5 and LTE-V2X PC5 access layer technology; • packet handling.
103 836-4-2
<empty>
TS
2.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/1038360402/02.01.01_60/ts_1038360402v020101p.pdf
The present document specifies the media-dependent functionalities for GeoNetworking defined in ETSI TS 103 836-4-1 [i.1] over ITS-G5 defined in ETSI EN 303 797 [i.2] as a network protocol for ad hoc routing in vehicular environments.
103 836-4-1
Intelligent Transport Systems (ITS); Vehicular Communications; GeoNetworking; Part 4: Geographical addressing and forwarding for point-to-point and point-to-multipoint communications; Sub-part 1: Media-Independent Functionality; Release 2
TS
2.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/1038360401/02.01.01_60/ts_1038360401v020101p.pdf
The present document specifies the Release 2 of the GeoNetworking protocol. Compared to the Release 1 specification, Release 2 primarily adds support for multi-channel operation.
103 818
Smart Secure Platform (SSP); I3C® interface (Release 17)
TS
17.1.0
http://www.etsi.org/deliver/etsi_ts/103800_103899/103818/17.01.00_60/ts_103818v170100p.pdf
The present document describes the I3C interface for the communication of an SSP, as defined in ETSI TS 103 666-1 [1] using the SCL protocol. The present document details the implementation of MIPI I3C Basic specification [4] for an SSP. Specifically, I3C electrical characteristics, Target state diagram, data link layer for I3C are defined.
103 836-2
Intelligent Transport Systems (ITS); Vehicular Communications; GeoNetworking; Part 2: Scenarios; Release 2
TS
2.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/10383602/02.01.01_60/ts_10383602v020101p.pdf
The present document classifies and specifies all communication scenarios that are supported by GeoNetworking.
103 836-1
Intelligent Transport Systems (ITS); Vehicular Communications; GeoNetworking; Part 1: Requirements; Release 2
TS
2.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/10383601/02.01.01_60/ts_10383601v020101p.pdf
The present document specifies, at an abstract level, the general, functional and performance requirements that apply to the GeoNetworking protocols (ETSI TS 103 836-4 [i.1], ETSI TS 103 836-5 [i.2] and ETSI TS 103 836-6 [i.3]) for use in ITS-G5 (ETSI EN 303 797 [i.4]), LTE-V2X or 5G-NR (ETSI EN 303 798 [i.5]) access technologies. The present document is applicable to ITS stations implementing ETSI ITS G5 (ETSI EN 303 797 [i.4]), LTE-V2X or 5G-NR access technology (ETSI EN 303 798 [i.5]) and the GeoNetworking protocols (ETSI TS 103 836-4 [i.1], ETSI TS 103 836-5 [i.2] and ETSI TS 103 836-6 [i.3]) for both single hop and multi-hop communications.
103 834-2
Smart Secure Platform (SSP); Part 2: Test Specification, SSP Test Tool Interface (Release 17)
TS
17.0.0
http://www.etsi.org/deliver/etsi_ts/103800_103899/10383402/17.00.00_60/ts_10383402v170000p.pdf
The present document is part of a series of documents specifying the Test Tool Interface (TTI) for the Smart Secure Platform. The present document is the test specification for the Test Tool Interface (TTI) shown in the test environment of ETSI TS 103 999-1 [3], testing the implementations in accordance to ETSI TS 103 834-1 [7]. It contains: • A list of requirements dedicated to the TTI derived from ETSI TS 103 999-1 [3]; • TTI related requirements from ETSI TS 103 834-1 [7]; • TTI related requirements from ETSI TS 103 666-1 [1] and ETSI TS 103 666-2 [2]; • the principle and requirements for testing the SSP Primary Platform (also known as VPP); • a selection of test cases to verify the implementation of the TTI independently from the respective manufacturers.
103 834-1
Smart Secure Platform (SSP); Part 1: Technical Specification, SSP Test Tool Interface (Release 17)
TS
17.0.0
http://www.etsi.org/deliver/etsi_ts/103800_103899/10383401/17.00.00_60/ts_10383401v170000p.pdf
The present document is part of a series of documents specifying the Test Tool Interface (TTI) for the Smart Secure Platform. It is the technical specification for the Test Tool Interface (TTI) shown in the test environment of ETSI TS 103 999-1 [3]. It describes: • the setup of the (TTI); • the authentication of the TT accessor granting rights for accessing TTI resources; • the TTI resources; • the principle and requirements for testing the SSP Primary Platform (also known as VPP). The TTI should fulfil the related requirements from ETSI an Global Platform, acting as an interface between SUT and Test Tool, capable to smoothly handle the data exchange, consisting of controls, events and SCL packets.
103 849
SmartM2M; Smart Escalator IoT System
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/103849/01.01.01_60/ts_103849v010101p.pdf
The present document specifies the IoT communication aspects for escalators and moving walkways (i.e. the Escalators System). For the rest of the present document the term escalator will be used to indicate both proper escalators and moving walkways. The present document defines the elements involved in such communications and their relations, from the central cloud level to the Smart Escalator Installations, including the integration with administrative information, the integration of Smart Escalator Systems not conformant to the present document (non-standard and legacy installations), and the integration of application targeting human users. The present document is intended to enable the similar use cases in ETSI TR 103 546 [i.3] and more in general aiming to support all the major use cases and requirements in the context of smart escalators. It deals with the architectural aspect of the communication and the set of information that is needed to assure interoperability across installations and platforms but does not specify the specific applications that are using this information. These applications are left to the market together with the extended set of information that are specific of each technology and may differ amongst providers. The Smart Escalator System communication relies on existing specification that are referenced in the present document (i.e. the oneM2M standard suite), but the definition of the element and the information to be exchanged is kept independent from underlaying communication framework and technology, to minimize the impact of the evolution of the communication framework on the information managed by the smart escalator. This approach allows also the delegation of basic important functionalities (e.g. security, management, use of different IT and telecommunication means, platforms and semantic interoperability support) to the underlaying communication framework, to evolve and adapt to the technology evolution without impacting directly the present document.
103 848
Cyber Security for Home Gateways; Security Requirements as vertical from Consumer Internet of Things
TS
1.2.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/103848/01.02.01_60/ts_103848v010201p.pdf
The present document defines security provisions for Home Gateways resulting from the analysis presented in ETSI TR 103 743 [i.1], and extending from the provisions for consumer IoT devices defined in ETSI EN 303 645 [1]. NOTE 1: The Home Gateway (HG) is not an IoT device as defined in ETSI EN 303 645 [1]. However, due to its generic character, ETSI EN 303 645 [1] is appropriate as baseline for the HG. The present document therefore is an adaption of the provisions of ETSI EN 303 645 [1] for the specific capabilities of a HG. EXAMPLE: The HG is responsible for network management and is therefore subject to higher requirements than a consumer IoT device concerning the role of an administrator having a higher level of privilege than a user. NOTE 2: The adoption of ETSI EN 303 645 [1] as a baseline does not infer that a Home Gateway (HG) is an IoT device according to the ETSI EN 303 645 [1] definition.
103 846
SmartM2M; Digital Twins: Functionalities and communication Reference Architecture
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/103846/01.01.01_60/ts_103846v010101p.pdf
The present document has several key goals. It aims to design and present a clear blueprint for how Digital Twins (DTs) can be designed and structured, how they work and communicate with respect to both physical and digital entities. The present document relies on the insights and information coming from use cases present in ETSI TR 103 844 [i.2] and established DT functionalities and requirements presented in ETSI TS 103 845 [i.3]. The present document defines how DTs can be designed through the presentation of a reference blueprint architecture with a specific focus on communication, discoverability and interoperability aspect. It also sets guidelines for DT adoption and applicability analysing how they can be deployed and monitored over time. Furthermore, the present document specifies the definition and communication aspects for DTs, defining their fundamental characteristics and the requirements for their communications and interoperability, through edge-cloud continuum deployments and with respect to their Physical and Digital Interfaces.
103 816-5
Publicly Available Specification (PAS); CYBER; Connecting Products based on MIKEY-SAKKE; Part 5: Discovery
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/10381605/01.01.01_60/ts_10381605v010101p.pdf
The present document is intended to specify the method and computer interface used for secure communication between two users of products based on Multimedia Internet Keying Sakai-Kasahara Key Encryption (MIKEY-SAKKE). It is intended for ensuring a Key Management Server (KMS) is able to securely query other KMSs, with the aim of discovering which KMS a given user - known by its UserID as defined in ETSI TS 103 816-2 [1].
103 840
SmartM2M; Model for oneM2M Performance Evaluation
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/103840/01.01.01_60/ts_103840v010101p.pdf
103 836-6-1
Intelligent Transport Systems (ITS); Vehicular Communications; GeoNetworking; Part 6: Internet Integration; Sub-part 1: Transmission of IPv6 Packets over GeoNetworking Protocols for ITS-G5; Release 2
TS
2.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/1038360601/02.01.01_60/ts_1038360601v020101p.pdf
The present document specifies the transmission of IPv6 packets over the ETSI GeoNetworking protocol for ITS-G5 and as defined in ETSI TS 103 836-4-1 [6] via a protocol adaptation sub-layer referred to as the GN6ASL (GeoNetworking to IPv6 Adaptation Sub-Layer). The scope of the present document is limited to the GN6ASL. NOTE 1: The mechanisms specified in the present document utilize capabilities of IEEE 802 technologies only, such as VLAN defined in IEEE 802.1Q [27]. The techniques specified in the present document fulfil the requirements for GeoNetworking and IPv6 integration described in ETSI TS 103 836-1 [2]. In particular, these techniques allow for the transport of IPv6 packets by ETSI GeoNetworking protocol given in ETSI TS 103 836-4-1 [6], enabling sub-IP multi-hop delivery of IPv6 packets, e.g. in a vehicular network. As a result, the connectivity provided by points-of-attachment to IPv6 infrastructure networks is extended by means of mobile relay nodes. In addition to that, the techniques described in the present document allow for geocasting of IPv6 multicast packets. The scope of the GN6ASL is limited to the fulfilment of the requirements for GeoNetworking and IPv6 integration described in ETSI TS 103 836-1 [2], clause 5.9, by enabling an ITS station including a GeoAdhoc router as given in ETSI TS 103 836-4-1 [6] running the GeoNetworking protocol and an IPv6-compliant protocol layer to: • exchange IPv6 packets with other ITS stations; • acquire globally routable IPv6 unicast addresses and communicate with an arbitrary IPv6 host located in the Internet, whenever an ITS station including a GeoAdhoc router and including or connected to an access router [4] providing IPv6 connectivity to the Internet is reachable directly or via other relay ITS stations; • perform the operations required by IETF RFC 3963 [13] for a Mobile Router whenever: a. an ITS mobile router supporting Network Mobility Basic Support (NEMO BS) as defined in IETF RFC 3963 [13] is present in the ITS station and runs on top of the GN6ASL; and b. an ITS station including a GeoAdhoc router and including or connected to an access router as defined in ETSI TS 103 836-3 [4] providing IPv6 connectivity to the Internet is reachable directly or via other relay ITS stations. NOTE 2: The present document adopts the definition of "IPv6-compliant" and "sub-IP multi-hop delivery" introduced in clause 3.1. Extending the IPv6 basic standards IETF RFC 8200 [7], IETF RFC 4291 [8], IETF RFC 4007 [9], IETF RFC 4861 [10] and IETF RFC 4862 [12] to support new features is outside the scope of the present document. Extensions to NEMO BS as given in IETF RFC 3963 [13] are outside the scope of the present document. Mechanisms for the dissemination of IPv6 routing information for hosts and routers not directly attaching to the network where GeoNetworking is used are outside the scope of the present document (e.g. discovery of IPv6 in-vehicle prefixes). However, the present document aims at providing the underlying support for the dissemination of such routing information, i.e. IPv6 multicast support for the network where the GeoNetworking protocol is used. With respect to IPv6 multicast and anycast support, the present document is limited to the support required to enable distribution of IPv6 multicast and anycast traffic on a shared link. Amendments to specific IPv6 multicast forwarding mechanisms are out of the scope of the present document. However, the present document aims at not preventing existing IPv6 multicast forwarding mechanisms from being used in conjunction with the GN6ASL. In order to facilitate the deployment of ITS systems, the present document aims at maintaining backward compatibility with pre-existent IPv6-compliant protocol implementations and NEMO BS implementations compliant with IETF RFC 3963 [13]. A usage example of NEMO BS with the GN6ASL is presented in the informative annex F. The mechanisms specified in the present document are distinct from but compatible with the IPv6-related functionalities given in ISO 21210-2012 [i.16], which specifies how IPv6 networking is generally operated in ITS stations. The techniques described in the present document provide a way to transport IPv6 packets that is fully compatible with the IPv6 specifications and pre-existing implementations, and hence is compatible with ISO 21210-2012 [i.16]. ETSI ETSI TS 103 836-6-1 V2.1.1 (2024-07) 9
103 836-5-1
Intelligent Transport Systems (ITS); Vehicular Communications; GeoNetworking; Part 5: Transport Protocols; Sub-part 1: Basic Transport Protocol; Release 2
TS
2.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/1038360501/02.01.01_60/ts_1038360501v020101p.pdf
The present document specifies the Basic Transport Protocol (BTP) for the transport of packets among ITS stations. It resides on top of the GeoNetworking protocol specified in ETSI TS 103 836-4-1 [4] with its media-dependent extensions and below the ITS-S facilities layer. It provides an end-to-end, connection-less and unreliable transport service.
103 831
Intelligent Transport Systems (ITS); Vehicular Communications; Basic Set of Applications; Decentralized Environmental Notification Service; Release 2
TS
2.2.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/103831/02.02.01_60/ts_103831v020201p.pdf
The present document provides the specification of the Release 2 DEN service. More specifically, the present document specifies the syntax and semantics of the "Decentralized Environmental Notification Message" (DENM) and the DENM protocol handling. The DEN service may be implemented in a vehicle ITS-S, a road side ITS-S, a personal ITS-S or a central ITS-S.
103 828
SmartM2M; SAREF: Ontology Support for Urban Digital Twins and usage guidelines
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/103828/01.01.01_60/ts_103828v010101p.pdf
The present document provides a recap of the priority gaps concerning the modelling of complex DTs by exclusively using the SAREF ontology suite. Then, it is discussed how such gaps may be filled through the extension of the SAREF suite in two different directions (ETSI TS 103 264 [1]), i.e. the modelling of semantic services and the integration of time series. Such enhancement is validated through the instantiation of two use cases.
103 825
Emergency Communications (EMTEL); Testing - Conformance test specifications for Advanced Mobile Location;Test Purposes (TP) for the handsets
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/103825/01.01.01_60/ts_103825v010101p.pdf
The present document provides the Test Purposes (TP) for Development of AML Test Descriptions for handsets as defined in the ETSI AML specification ETSI TS 103 625 [1] listed in clause 2.1 of the present document.
103 845
SmartM2M; Digital Twins Communication Requirements
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/103845/01.01.01_60/ts_103845v010101p.pdf
The present document specifies the definition and communication aspects for Digital Twins (DTs), defining their fundamental characteristics and the requirements for their communications and interoperability, through edge-cloud continuum deployments and with respect to their Physical and Digital Interfaces. The purpose of the present document is to enable the use cases in ETSI TR 103 844 [i.2] (D1) and to support all the major use cases and requirements in the context of DTs. It deals with the architectural aspect of the communication and the set of information needed to ensure interoperability across installations and platforms, without specifying the specific applications that use this information. The communication for DTs relies on existing specifications that are referenced in the present document, but the definition of the elements and the information to be exchanged is kept independent from the underlying communication framework and technology. This is to minimize the impact of the evolution of the communication framework on the information managed by the DTs. The present document focuses on the definition of DTs communication functionality and properties, as well as the standardization of DTs communication requirements.
103 836-3
Intelligent Transport Systems (ITS); Vehicular Communications; GeoNetworking; Part 3: Network Architecture; Release 2
TS
2.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/10383603/02.01.01_60/ts_10383603v020101p.pdf
The present document specifies a network architecture of communications in Cooperative Intelligent Transportation Systems (C-ITS). The network architecture is focused on, but not limited to, vehicular communication. The architecture enables a wide range of ITS applications for road safety, traffic efficiency as well as for infotainment and business. The present document defines the framework for network and data transport protocols that provide data exchange among ITS stations. A particular aspect is the GeoNetworking protocol that provides ad hoc and multi-hop communication over short-range wireless technologies utilizing geographical positions.
103 816-4
Publicly Available Specification (PAS); CYBER; Connecting Products based on MIKEY-SAKKE; Part 4: Group Voice Communication
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/10381604/01.01.01_60/ts_10381604v010101p.pdf
The present document is intended to specify the group conferencing interface used for encrypted voice communications. It is intended for use in connecting products based on Multimedia Internet Keying Sakai-Kasahara Key Encryption (MIKEY-SAKKE) domains and to validate products.
103 816-3
Publicly Available Specification (PAS); CYBER; Connecting Products based on MIKEY-SAKKE Part 3: One-to-One Messaging
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/10381603/01.01.01_60/ts_10381603v010101p.pdf
The present document is intended to specify the interface used for encrypted one-to-one text messages. It is intended for use in connecting products based on Multimedia Internet Keying Sakai-Kasahara Key Encryption (MIKEY-SAKKE) domains and to validate products.
103 816-2
Publicly Available Specification (PAS); CYBER; Connecting Products based on MIKEY-SAKKE; Part 2: One-to-One Voice Communication
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/10381602/01.01.01_60/ts_10381602v010101p.pdf
The present document is intended to specify the one-to-one interface used for voice communications. It is intended for use in connecting products based on Multimedia Internet Keying Sakai-Kasahara Key Encryption (MIKEY-SAKKE) domains and to validate products.
103 816-1
Publicly Available Specification (PAS); CYBER; Connecting Products based on MIKEY-SAKKE; Part 1: KMS Certificate Definition
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/10381601/01.01.01_60/ts_10381601v010101p.pdf
The present document is intended to specify the Key Management Server (KMS) Certificate used for sharing security credentials between KMS domains. It is intended for use in connecting domains of products based on Multimedia Internet Keying Sakai-Kasahara Key Encryption (MIKEY-SAKKE) using separate KMSs.
103 815
CYBER; Cyber Security for Consumer Internet of Things; Requirements for Residential Smart Door Locking Devices
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/103815/01.01.01_60/ts_103815v010101p.pdf
The present document specifies requirements for consumer residential Smart Door Locking Device (SDL) including apps: • cyber security; • credential related security; and • electromechanical security and/or mechanical security. The present document builds on ETSI EN 303 645 [1] for cyber security requirements, adding additional provisions specific to smart door locking devices. The present document also builds on other EN standards for credential related security, electromechanical security and mechanical security. A description of the basic concepts of Residential Smart Door Locking Devices is given in Annex A.
103 813
Smart Secure Platform (SSP); Test Specification, SPI interface (Release 15)
TS
15.1.0
http://www.etsi.org/deliver/etsi_ts/103800_103899/103813/15.01.00_60/ts_103813v150100p.pdf
The present document covers the minimum characteristics which are considered necessary for the Serial Peripheral Interface (SPI) communication of an SSP in order to provide compliance to ETSI TS 103 713 [1]. The present document specifies the test cases for: • the physical layer (electrical characteristics); • the MAC layer; • the data link layer; and • the SHDLC layer (as defined in ETSI TS 102 613 [5]) of the SPI. Tests for the usage of an SPI different to what is defined in ETSI TS 103 713 [1] are out of scope of the present document.
103 807
Mobile Standards Group (MSG); IMT Cellular Networks Base Stations (BS) Additional Regulatory Requirements
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/103807/01.01.01_60/ts_103807v010101p.pdf
The present document applies to the following equipment types: • E-UTRA, UTRA, NR, NB-IoT, and MSR capable Base Stations. The present document addresses additional requirements arising from EC/CEPT spectrum regulatory framework that apply to specific equipment in specific cases in certain countries and/or in certain geographical areas. The present document is referenced in the relevant IMT Harmonised Standards - ETSI EN 301 908 Part 14 [i.5] (E-UTRA BS), Part 18 [i.6] (MSR BS), Part 23 [i.7] (AAS BS) and Part 24 [i.8] (NR BS) - to address those additional requirements.
103 806
Smart Body Area Network (SmartBAN); Hub to Hub Communication for SmartBAN Medium Access Control (MAC)
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/103806/01.01.01_60/ts_103806v010101p.pdf
The present document extends the low complexity Medium Access Control (MAC) for SmartBAN defined in ETSI TS 103 325 [1] with hub to hub communication capability. The main scope of the present document is to define specifications for enabling hub to hub communication between the hubs of neighbouring SmartBANs.
103 805
Smart Body Area Network (SmartBAN); Relay Functionality for SmartBAN Medium Access Control (MAC)
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/103805/01.01.01_60/ts_103805v010101p.pdf
The present document extends the low complexity Medium Access Control (MAC) for SmartBAN defined in ETSI TS 103 325 [1] with relay functionality. The main scope of the present document is to define specifications for relay node functionality enabling a two-hop communication within a SmartBAN.
103 802
Speech and multimedia Transmission Quality (STQ); Objective test method for the evaluation of echo impairments
TS
1.2.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/103802/01.02.01_60/ts_103802v010201p.pdf
The present document provides an instrumental model for the signal-based prediction of echo artefacts that may occur in telecommunication devices of all kinds. This prediction model assesses audible degradations of a virtual end-to-end communication scenario, including partial masking via sidetone as described in ETSI TS 103 801 [1]. The predicted Mean Opinion Score (MOS) corresponds to the Degradation Category Rating (DCR) according to Recommendation ITU-T P.800 [i.1]. The prediction model described in the present document is applicable to handset, headset or hands-free terminals and is not limited to a certain audio bandwidth, i.e. applications from narrowband to fullband are supported. The following use cases are out of scope for the prediction model described in the present document: • Ambient noise at the device-side (near-end). • Ambient noise at the reference-side (far-end). • Talker at near-end (double talk). • Network impairments other than constant delay. The prediction model assumes monaural listening at the reference-side under silent condition and high-quality handsets or headsets with low leakage. Assessment of binaurally perceived echo artefacts at the reference-side is out of scope of the present document.
103 801
Speech and multimedia Transmission Quality (STQ); Subjective test methodologies for the evaluation of echo control systems
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103800_103899/103801/01.01.01_60/ts_103801v010101p.pdf
The present document provides a framework for auditory testing of echo artefacts and double talk impairments that may occur in telecommunication devices of all kind. The present document assesses degradations in end-to-end scenarios as perceived by the listener at the reference-side. Only degradations caused by the terminal located at the device-side are taken into account by the framework. Since the network delay between reference-side and device-side (and vice-versa) also has an impact on the DUT's signal processing and/or the listener's quality of experience, this parameter is included in the present document as well - any other degradations (e.g. packet-loss in one of the two directions) are out of scope. Only DCR scales are supported in the auditory test, in particular for echo artefacts and double talk disturbances, which have the most impact on conversations (more may be added in the future). ACR scales e.g. speech distortion or overall quality are not considered for auditory testing. Any instrumental model predicting results according to the introduced listening test design is out of scope.
103 799
Publicly Available Specification (PAS); DASH-IF Content Protection Information Exchange Format
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103799/01.01.01_60/ts_103799v010101p.pdf
The scope of the present document is to define a Content Protection Information Exchange (CPIX) Format. A CPIX document contains keys and DRM information used for encrypting and protecting content and can be used for exchanging this information among entities needing it in many possibly different workflows for preparing, for example, DASH or HLS content. The CPIX document itself can be encrypted, signed and authenticated so that its receivers can be sure that its confidentiality, source and integrity are also protected.
103 794
Intelligent Transport Systems (ITS); LTE-V2X Access layer for Intelligent Transport Systems operating in the 5 GHz frequency band; Test specification
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103794/01.01.01_60/ts_103794v010101p.pdf
The present document specifies the minimum requirements to demonstrate compliance with ETSI EN 303 613 [1].
103 789
Short Range Devices (SRD) and Ultra Wide Band (UWB); Radar related parameters and physical test setup for object detection, identification and RCS measurement
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103789/01.01.01_60/ts_103789v010101p.pdf
The purpose of the present document is to summarize Radar related parameters for object detection, identification and RCS measurement and to develop a physical test setup (e.g. based on fixed and moving targets with specified RCS) to provide a simplified test for the assessment of RBS and RBR requirements. Therefore, a clear specification is necessary to provide all necessary information to test houses to run "reproducible" and "comparable" tests.
103 788
Short Range Devices (SRD) and Ultra Wide Band (UWB); Measurement techniques and specification for RX conformance tests with target simulator
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103788/01.01.01_60/ts_103788v010101p.pdf
The present document contains information on radar target simulators and their application for radar tests identified in ETSI EN 303 883-1 [i.1] and ETSI EN 303 883-2 [i.2]. The present document describes measurement setups and approaches for anechoic chambers both far-field and near field-to-far field transforming.
103 786
Environmental Engineering (EE); Measurement method for energy efficiency of wireless access network equipment; Dynamic energy efficiency measurement method of 5G Base Station (BS)
TS
1.3.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103786/01.03.01_60/ts_103786v010301p.pdf
The present document covers the following radio access technology: • 5G NR. The methodology described in the present document is to measure Base Station dynamic energy efficiency. Within the present document, it is referred to as dynamic measurement. The results based on dynamic measurements of the BS provide energy efficiency information for BS with dynamic load. The present document covers only the enhanced Mobile Broadband (eMBB) use case of 5G. Other use cases such as massive Machine-Type Communication (mMTC) and Ultra-Reliable and Low-Latency Communication (URLLC) will be the subject for future versions of the present document. Energy consumption of terminal (end-user) equipment is outside the scope of the present document, however, how a User Equipment (UE) affects a Base Station energy performance will be considered for further study. The scope of the present document is not to set and define target values for the power consumption nor the energy efficiency of equipment and neither for regulatory nor type approval purpose. The results should only be used to assess and compare the energy efficiency of complete Base Stations. Wide Area Base Stations are covered in the present document. The present document only covers conducted testing, not Over The Air (OTA) testing. In other words, the present document is applicable to BS type 1-C and BS type 1-H (at TAB connectors).
103 780
SmartM2M; SAREF: oneM2M usage guidelines
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103780/01.01.01_60/ts_103780v010101p.pdf
The present document has the objective to provide guidelines for the usage of SAREF over oneM2M (also including the SDT interoperability) for vertical industry sectors. The present document also provides a simple use case for guiding application developers to model physical devices in oneM2M and adding semantic annotations that will enable interoperability of devices that are modelled in oneM2M: • Description of a physical device that is to be modelled in oneM2M. • Description of methods that can be used to model the device using oneM2M resources and procedures. • The semantic annotation of the devices using the oneM2M base ontology. • The semantic queries that can be used to discover device capabilities and enable interoperability. • The call flows for implementation of the use case with a focus on the semantic aspects.
103 779
SmartM2M; Requirements and Guidelines for cross-domain data usability of IoT devices
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103779/01.01.01_60/ts_103779v010101p.pdf
The present document has the objective: • to define minimum requirements for data and services usability on professional and general public IoT devices and platforms, whether they are critical or not; • to develop a horizontal cross-domain specification encompassing these requirements.
103 776
Digital Enhanced Cordless Telecommunications (DECT); DECT-2020 New Radio (NR); Test specification: radio
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103776/01.01.01_60/ts_103776v010101p.pdf
The present document specifies technical characteristics and methods of measurements for equipment employing DECT-2020 NR (New Radio) as specified in by the multi-part technical specification ETSI TS 103 636 (see [i.8] for an overview). These radio equipment types can operate in all or any part of the frequency bands given in table 1. Table 1: Operating band numbering Band number Receiving band (MHz) Transmitting band (MHz) 1 1 880 to 1 900 1 880 to 1 900 2 1 900 to 1 920 1 900 to 1 920 3 2 400 to 2 483,5 2 400 to 2 483,5 4 902 to 928 902 to 928 5 450 to 470 450 to 470 6 698 to 806 698 to 806 7 716 to 728 716 to 728 8 1 432 to 1 517 1 432 to 1 517 9 1 910 to 1 930 1 910 to 1 930 10 2 010 to 2 025 2 010 to 2 025 11 2 300 to 2 400 2 300 to 2 400 12 2 500 to 2 620 2 500 to 2 620 13 3 300 to 3 400 3 300 to 3 400 14 3 400 to 3 600 3 400 to 3 600 15 3 600 to 3 700 3 600 to 3 700 16 4 800 to 4 990 4 800 to 4 990 17 5 725 to 5 875 5 725 to 5 875 18 5 150 to 5 350 5 150 to 5 350 19 5 470 to 5 725 5 470 to 5 725 National regulation can allow additional frequency bands. The limits and test procedures included in the present document are applicable for DECT-2020 NR use in frequency ranges below 6 GHz. The present document provides test methods and technical parameters directly applicable for testing in the following bands: band 1 (1 880 - 1 900), band 2 (1 900 - 1 920), band 9 (1 910 - 1 930) and band 10 (2 010 - 2 025). Table 1a: Operating bands where the present document is directly applicable Band number Receiving band (MHz) Transmitting band (MHz) 1 1 880 to 1 900 1 880 to 1 900 2 1 900 to 1 920 1 900 to 1 920 9 1 910 to 1 930 1 910 to 1 930 10 2 010 to 2 025 2 010 to 2 025 Testing in all other bands is considered feasible using the test methods defined in the present document, however no guarantee in the validity and accuracy of the testing parameters is given. The present document may be used as reference guideline for testing in such bands. ETSI ETSI TS 103 776 V1.1.1 (2023-09) 10
103 771
Digital Radio Mondiale (DRM); Regional profiles
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103771/01.01.01_60/ts_103771v010101p.pdf
The present document defines regional profiles for use by broadcasters and receiver manufacturers to create good text experiences for audiences in different markets.
103 770
Digital Video Broadcasting (DVB); Service Discovery and Programme Metadata for DVB-I
TS
1.2.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103770/01.02.01_60/ts_103770v010201p.pdf
The present document defines the following: • signalling of linear TV or radio services and content that are delivered over broadband; • access linear TV services that are delivered by broadband in a way that is consistent with their access to linear TV services delivered by RF-based DVB technologies; • the metadata and mechanisms to present electronic programme guides; • the integration of linear services delivered by the RF-based DVB tuner and linear services delivered by broadband into a single coherent offering that is accessed through a single consistent UI; and • a method for national TV regulators or their representatives, operators and trademark licensors to offer a list of trusted/legitimate/authorized/regulated services.
103 769
Digital Video Broadcasting (DVB); Adaptive media streaming over IP multicast
TS
1.2.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103769/01.02.01_60/ts_103769v010201p.pdf
The present document specifies a reference functional architecture for an end-to-end system that delivers linear content over Internet Protocol (IP) networks in a scalable and standards-compliant manner. Scalability is achieved by means of IP multicast operating in parallel with and alongside conventional unicast delivery. The procedures and protocols used between the system functions are specified, along with data interchange formats, where appropriate.
103 759
Intelligent Transport Systems (ITS); Security; Misbehaviour Reporting service; Release 2
TS
2.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103759/02.01.01_60/ts_103759v020101p.pdf
The present document specifies the Misbehaviour Reporting service in support of trusted ITS stations for the reporting of local misbehaviour detections to a central authority (Misbehaviour Authority), which collects reports from different ITS stations for global analysis and reaction.
103 757
SmartM2M; Asynchronous Contact Tracing System; Fighting pandemic disease with Internet of Things (IoT)
TS
2.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103757/02.01.01_60/ts_103757v020101p.pdf
The present document is structured as follows: • Clauses 1 to 3 set the scene and provide references as well as definitions of terms, symbols and abbreviations, which are used in the present document. • Clause 4 shortly describes contact tracing and testing techniques, with in particular Dorfman's Group testing [i.1], which contributes to the ACT methodology. • Clause 5 specifies the solution for the ACT method using the oneM2M standard communication framework. It allocates the functionalities in the architectural framework of the solution and the related interfaces. It defines the oneM2M resources required to implement the functionalities. It specifies the ACT method in oneM2M, in terms of features, resources, parameters, API, considering modifications to the existing ones and/or definition of new ones. • Clause 6 presents the ACT oneM2M communication framework. • Annex A (normative) presents the ACT Messages Specification. • Annex B (informative) presents some JSON messages. • Annex C (informative) contains a bibliography. • Annex D (informative) contains the present document Change History.
103 757
SmartM2M; Asynchronous Contact Tracing System; Fighting pandemic disease with Internet of Things (IoT)
TS
1.1.2
http://www.etsi.org/deliver/etsi_ts/103700_103799/103757/01.01.02_60/ts_103757v010102p.pdf
The present document is structured as follows: • Clauses 1 to 3 set the scene and provide references as well as definitions of terms, symbols and abbreviations, which are used in the present document. • Clause 4 shortly describes contact tracing and testing techniques, with in particular Dorfman's Group testing [i.1], which contributes to the ACT methodology. • Clause 5 specifies the solution for the ACT method using the oneM2M standard communication framework. It allocates the functionalities in the architectural framework of the solution and the related interfaces. It defines the oneM2M resources required to implement the functionalities. It specifies the ACT method in oneM2M, in terms of features, resources, parameters, API, considering modifications to the existing ones and/or definition of new ones. • Clause 6 presents the ACT oneM2M communication framework. • Annex A (normative) presents the ACT Messages Specification. • Annex B (informative) presents some JSON messages. • Annex C (informative) contains a bibliography. • Annex D (informative) contains the present document Change History.
103 756
Emergency Communications (EMTEL); PEMEA Instant Message Extension
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103756/01.01.01_60/ts_103756v010101p.pdf
The present document describes the PEMEA Instant Message capability for PEMEA and the need for this functionality. The required entities and actors are identified along with the protocol, specifying message exchanges between entities. The message formats are specified and procedural descriptions of expected behaviours under different conditions are detailed.
103 755
Emergency Communications (EMTEL); PEMEA ESInet Shared Services
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103755/01.01.01_60/ts_103755v010101p.pdf
The present document describes interoperability, re-use and enhancement of PEMEA and Emergency Services IP network (ESInet) components to ensure seamless integration of Internet Apps and traditional telecommunications service provider solutions and future emergency services offerings. An understanding of the PEMEA architecture is specified in ETSI TS 103 478 [1] and the Core elements for network independent access to emergency services in ETSI TS 103 479 [2], currently named Next Generation 112 (NG112) architecture.
103 754
Broadband Radio Access Networks (BRAN); Multiple Access Points Performance Testing
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103754/01.01.01_60/ts_103754v010101p.pdf
The present document provides a set of test cases to verify the performance (coverage, throughput, roaming time, etc.) of the multiple Access Point (multiple AP) networks in the home. Each test case consists of testing environment setup, device and equipment configuration, test procedures, and pass/fail metrics.
103 752-1
Digital Video Broadcasting (DVB); Dynamic substitution of content in linear broadcast; Part 1: Carriage and signalling of placement opportunity information in DVB Transport Streams
TS
1.2.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/10375201/01.02.01_60/ts_10375201v010201p.pdf
The present document specifies broadcast signalling for DVB Dynamic Advertisement Substitution.
103 745
Requirements for the shared use of spectrum between Urban Rail and Road Intelligent Transport Systems (ITS) operating in the 5 875 MHz to 5 925 MHz frequency range
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103745/01.01.01_60/ts_103745v010101p.pdf
The present document specifies sharing solutions for use of the frequency band 5 915 - 5 925 MHz (Band U) by Urban Rail and Road ITS considering that Urban Rail has priority in that band. In addition, it addresses the shared use of the band 5 875 - 5 915 MHz (Band R) by Urban Rail ITS, where Road ITS has priority.
103 744
CYBER; Quantum-Safe Cryptography (QSC); Quantum-safe Hybrid Key Establishment
TS
1.2.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103744/01.02.01_60/ts_103744v010201p.pdf
The present document specifies several methods for deriving cryptographic keys from multiple shared secrets. The shared secrets are established using existing traditional key establishment schemes, like Elliptic Curve Diffie-Hellman (ECDH) in NIST SP800-56Ar3 [1], and new quantum-safe Key Encapsulation Mechanisms (KEMs).
103 740
Speech and multimedia Transmission Quality (STQ); Transmission requirements for wideband mobile wireless terminals (hands-free) from a QoS perspective as perceived by the user
TS
1.4.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103740/01.04.01_60/ts_103740v010401p.pdf
The present document provides speech transmission performance requirements for wireless terminals; it addresses several types of mobile wireless terminals, including softphones. The present document addresses hands-free functionality of wideband wireless terminals. Test methods and performance requirements apply (but are not limited) to wireless terminals equipped with the following mobile network access functionalities: • Circuit-switched telephony in mobile networks like e.g. GSM/2G, 3G/UMTS. • Packet-switched mobile networks like e.g. LTE/4G, NR/5G, WLAN and WIMAX™ in conjunction with the associated telephony services like e.g. VoLTE, VoNR or VoWiFi. The terminal may include additional analogue (e.g. electrical headset connection) or digital (e.g. Bluetooth®) interfaces (wired or wireless) between POI and acoustic test equipment. Requirements and test methods only apply to the whole terminal, i.e. the full electro-acoustic path between talker/listener and network access. Specific requirements and test methods exclusively on such additional interfaces are for further study and out of scope for the present document. Terminals equipped with the following network access functionalities are out of scope: • DECT - corresponding tests and requirements can be found in ETSI EN 300 176-2 [i.4] • Wired VoIP telephony - corresponding tests and requirements can be found in ETSI ES 202 740 [i.5] • Wireless VoIP telephony like e.g. OTT applications - corresponding tests and requirements can be found in ETSI ES 202 740 [i.5]
103 739
Speech and multimedia Transmission Quality (STQ); Transmission requirements for wideband mobile wireless terminals (handset and headset) from a QoS perspective as perceived by the user
TS
1.4.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103739/01.04.01_60/ts_103739v010401p.pdf
The present document provides speech transmission performance requirements for wireless terminals; it addresses several types of mobile wireless terminals, including softphones. The present document addresses handset and headset functionality of wideband wireless terminals. Test methods and performance requirements apply (but are not limited) to wireless terminals equipped with the following mobile network access functionalities: • Circuit-switched telephony in mobile networks like e.g. GSM/2G, 3G/UMTS. • Packet-switched mobile networks like e.g. LTE/4G, NR/5G, WLAN and WIMAX™ in conjunction with the associated telephony services like e.g. VoLTE, VoNR or VoWiFi. The terminal may include additional analogue (e.g. electrical headset connection) or digital (e.g. Bluetooth®) interfaces (wired or wireless) between POI and acoustic test equipment. Requirements and test methods only apply to the whole terminal, i.e. the full electro-acoustic path between talker/listener and network access. Specific requirements and test methods exclusively on such additional interfaces are for further study and out of scope for the present document. Terminals equipped with the following network access functionalities are out of scope: • DECT - corresponding tests and requirements can be found in ETSI EN 300 176-2 [i.2] • Wired VoIP telephony - corresponding tests and requirements can be found in ETSI ES 202 739 [i.3] • Wireless VoIP telephony like e.g. OTT applications - corresponding tests and requirements can be found in ETSI ES 202 739 [i.3]
103 738
Speech and multimedia Transmission Quality (STQ); Transmission requirements for narrowband mobile wireless terminals (hands-free) from a QoS perspective as perceived by the user
TS
1.4.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103738/01.04.01_60/ts_103738v010401p.pdf
The present document provides speech transmission performance requirements for wireless terminals; it addresses several types of mobile wireless terminals, including softphones. The present document addresses hands-free functionality of narrowband wireless terminals. Test methods and performance requirements apply (but are not limited) to wireless terminals equipped with the following mobile network access functionalities: • Circuit-switched telephony in mobile networks like e.g. GSM/2G, 3G/UMTS. • Packet-switched mobile networks like e.g. LTE/4G, NR/5G, WLAN and WIMAX™ in conjunction with the associated telephony services like e.g. VoLTE, VoNR or VoWiFi. The terminal may include additional analogue (e.g. electrical headset connection) or digital (e.g. Bluetooth®) interfaces (wired or wireless) between POI and acoustic test equipment. Requirements and test methods only apply to the whole terminal, i.e. the full electro-acoustic path between talker/listener and network access. Specific requirements and test methods exclusively on such additional interfaces are for further study and out of scope for the present document. Terminals equipped with the following network access functionalities are out of scope: • DECT - corresponding tests and requirements can be found in ETSI EN 300 176-2 [i.8] • Wired VoIP telephony - corresponding tests and requirements can be found in ETSI ES 202 738 [i.9] • Wireless VoIP telephony like e.g. OTT applications - corresponding tests and requirements can be found in ETSI ES 202 738 [i.9]
103 737
Speech and multimedia Transmission Quality (STQ); Transmission requirements for narrowband mobile wireless terminals (handset and headset) from a QoS perspective as perceived by the user
TS
1.4.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103737/01.04.01_60/ts_103737v010401p.pdf
The present document provides speech transmission performance requirements for wireless terminals; it addresses several types of mobile wireless terminals, including softphones. The present document addresses handset and headset functionality of narrowband wireless terminals. Test methods and performance requirements apply (but are not limited) to wireless terminals equipped with the following mobile network access functionalities: • Circuit-switched telephony in mobile networks like e.g. GSM/2G, 3G/UMTS. • Packet-switched mobile networks like e.g. LTE/4G, NR/5G, WLAN and WIMAX™ in conjunction with the associated telephony services like e.g. VoLTE, VoNR or VoWiFi. The terminal may include additional analogue (e.g. electrical headset connection) or digital (e.g. Bluetooth®) interfaces (wired or wireless) between POI and acoustic test equipment. Requirements and test methods only apply to the whole terminal, i.e. the full electro-acoustic path between talker/listener and network access. Specific requirements and test methods exclusively on such additional interfaces are for further study and out of scope for the present document. Terminals equipped with the following network access functionalities are out of scope: • DECT - corresponding tests and requirements can be found in ETSI EN 300 176-2 [i.2]. • Wired VoIP telephony - corresponding tests and requirements can be found in ETSI ES 202 737 [i.3]. • Wireless VoIP telephony like e.g. OTT applications - corresponding tests and requirements can be found in ETSI ES 202 737 [i.3].
103 736-2
Hybrid Broadcast Broadband TV; Targeted Advertising; Part 2: Non-functional requirements
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/10373602/01.01.01_60/ts_10373602v010101p.pdf
The present document contains non-functional requirements for the replacement of advertisements in the broadcast with ones targeted at the consumer that accompany the functional requirements in ETSI TS 103 736-1[1]. The requirements in the present document apply to terminals.
103 736-1
Hybrid Broadcast Broadband TV; Targeted Advertising; Part 1: Functional requirements
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/10373601/01.01.01_60/ts_10373601v010101p.pdf
The present document extends ETSI TS 102 796 [1] to enable the replacement of advertisements in the broadcast with ones targeted at the consumer including defining how adverts are to be preloaded, defining an API for switching from broadcast to an advert and vice-versa and defining how reporting of advert playback can be done.
103 735
SmartM2M; Smart Lifts IoT System
TS
1.1.2
http://www.etsi.org/deliver/etsi_ts/103700_103799/103735/01.01.02_60/ts_103735v010102p.pdf
The present document specifies the IoT communication aspects for Smart Lifts (i.e. the Smart Lift System). It defines the elements involved in such communications and their relations, from the central cloud level to the Smart Lift installations, including the integration with administrative information, the integration of smart lift systems not conformant to the present document (non-standard and legacy installations), and the integration of application targeting human users. The present document is intended to enable the use cases in [i.3] and more in general aiming to support all the major use cases and requirements in the context of Smart Lift. It deals with the architectural aspect of the communication and the set of information that is needed to assure interoperability across installations and platforms but is not specifying the specific applications that are using this information. These applications are left to the market together with the extended set of information that are specific of each technology and may differ across providers. The Smart Lift System communication rely on existing specification that are referenced in the present document (i.e. the oneM2M standard suite), but the definition of the element and the information to be exchanged is kept independent from underlaying communication framework and technology, to minimize the impact of the evolution of the communication framework on the information managed by the smart lift. This approach allows also the delegation of basic important functionality (e.g. security, management, use of different IT and telecommunication means, platforms and semantic interoperability support) to the underlaying communication framework, to evolve and adapt to the technology evolution without impacting directly the present document.
103 732-5
Cyber Security (CYBER); Consumer Mobile Device; Part 5: Bootloader & Root of Trust Protection Profile Module
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/10373205/01.01.01_60/ts_10373205v010101p.pdf
The present document defines a PP-Module for Consumer Mobile Device (CMD) which adds additional security requirements focused on the bootloader and storage configuration. The present document identifies key security requirements for how the bootloader should be configured to protect the integrity of the CMD. The present document is intended for CMD manufacturers implementing those security requirements for device certification and for third parties looking to assess the security functions on CMD such as evaluators. The Target Of Evaluation (TOE) described by the present document is the bootloader and the storage configuration included on a CMD.
103 732-4
CYBER; Consumer Mobile Device; Part 4: Preloaded Applications Protection Profile Module
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/10373204/01.01.01_60/ts_10373204v010101p.pdf
The present document defines a PP-Module for Consumer Mobile Device (CMD) which adds additional security requirements on preloaded applications and the functional capabilities (objectives and security functional requirements) that are required to mitigate threats from poor programming of those applications. The present document is intended for CMD manufacturers implementing those security requirements for device certification and for third parties looking to assess the security functions on CMD such as evaluators. The Target Of Evaluation (TOE) described by the present document is the set of preloaded applications included on a CMD.
103 732-3
CYBER; Consumer Mobile Device; Part 3: Multi-user Protection Profile Module
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/10373203/01.01.01_60/ts_10373203v010101p.pdf
The present document defines a PP-Module for Consumer Mobile Device (CMD) Multi-user, which adds support for multiple unique users to the CMD each with separate authentication and (shared, but isolated) storage. The PP-Module identifies the key aspects needed to support multi-user capabilities on the CMD platform and identifies the threads associated to them and the functional capabilities (objectives and security functional requirements) that are required to mitigate those threats. The Target Of Evaluation (TOE) described by the present document is a consumer mobile device as enhanced by support for multiple users.
103 732-2
CYBER; Consumer Mobile Device; Part 2: Biometric Authentication Protection Profile Module
TS
1.1.2
http://www.etsi.org/deliver/etsi_ts/103700_103799/10373202/01.01.02_60/ts_10373202v010102p.pdf
The present document defines a PP-Module for Consumer Mobile Device (CMD) which adds the capability to use biometric characteristics for authentication. The present document identifies key assets of the biometric system of the CMD to be protected and identifies the threats associated to them and the functional capabilities (objectives and security functional requirements) that are required to mitigate those threats. The present document is intended for CMD manufacturers implementing those security requirements for device certification and for third parties looking to assess the security functions on CMD such as evaluators. The Target Of Evaluation (TOE) described by the present document is a biometric system incorporated into a CMD. Presentation Attack Detection is excluded from the scope of this TOE.
103 732-1
CYBER; Consumer Mobile Device; Part 1: Base Protection Profile
TS
2.1.2
http://www.etsi.org/deliver/etsi_ts/103700_103799/10373201/02.01.02_60/ts_10373201v020102p.pdf
The present document defines a PP for Consumer Mobile Device (CMD), which is typically a user-customizable device utilizing an operating system, supporting installation and maintenance of applications, with wireless internet connectivity, high computation power and rich user interface, such as smartphones or tablets, used for various purposes by the individual owner. The present document identifies key assets of the CMD to be protected and identifies the threats associated to them and the functional capabilities (objectives and security functional requirements) that are required to mitigate those threats. Finally, the present document specifies the security assurance requirements against which the CMD security can be assessed in a CC security evaluation. The present document is intended for CMD manufacturers implementing those security requirements for device certification and for third parties looking to assess the security functions on CMD such as evaluators. The Target Of Evaluation (TOE) described by the present document is a consumer mobile device. The following items are excluded from the scope: • all applications (apps) downloaded by a user; • all peripheral devices, including any data residing on these devices and any services associated with these devices, for example memory card; • CMD features related to cellular mobile communication, including secure element which stores user credentials for cellular mobile communication, for example UICC [i.5]; • features related to multiple authenticated users using the same CMD.
103 732
CYBER; Consumer Mobile Device Protection Profile
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103732/01.01.01_60/ts_103732v010101p.pdf
The present document defines a PP for Consumer Mobile Device (CMD), which is typically a user-customisable device utilising an operating system, supporting installation and maintenance of applications, with wireless internet connectivity, high computation power and rich user interface, such as smartphones or tablets, used for various purposes by the individual owner. The present document identifies key assets of the CMD to be protected and identifies the threats associated to them and the functional capabilities (objectives and security functional requirements) that are required to mitigate those threats. Finally, the present document specifies the security assurance requirements against which the CMD security can be assessed in a CC security evaluation. The present document is intended for CMD manufacturers implementing those security requirements for device certification and for third parties looking to assess the security functions on CMD such as evaluators. The Target Of Evaluation (TOE) described by the present document is a consumer mobile device. The following items are excluded from the scope: • all applications (apps) downloaded by a human user and pre-installed non-system permission apps which can be uninstalled by the human user; • all peripheral devices, including any data residing on these devices and any services associated with these devices, for example memory card; • CMD features related to cellular mobile communication, including secure element which stores user credentials for cellular mobile communication, for example UICC [i.6]; • features related to multiple authenticated human users using the same CMD.
103 724
Intelligent Transport Systems (ITS); Facilities layer function; Interference Management Zone Message (IMZM); Release 2
TS
2.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103724/02.01.01_60/ts_103724v020101p.pdf
The present document defines the "Interference Management Zone Message" (IMZM) that is used to identify an interference management area with the aim to optimize the spectrum sharing between road ITS and other services/applications. The objective is to support the dynamic band sharing in co-channel and adjacent channel scenarios between ITS stations and other services and applications. The message structure will be based on the existing CAM ProtectedCommunicationZones structure.
103 723
Intelligent Transport Systems (ITS); Profile for LTE-V2X Direct Communication
TS
1.2.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103723/01.02.01_60/ts_103723v010201p.pdf
The scope of the present document is to identify a common set of standards and specify configuration parameter values and references required for the implementation of direct communication between ITS stations, to achieve interoperable deployment of ITS services via V2V and V2I links. The scope is limited to communication aspects of ITS stations using the single access layer technology LTE-V2X PC5 mode 4. Additional requirements like triggering conditions, position accuracy, security, and functional safety aspects are out of scope of the present document. Descriptions, definitions and rules for all layers (Applications, Facilities, Networking & Transport and Access) of the ETSI ITS station reference architecture are considered as needed.
103 720
5G Broadcast System for linear TV and radio services; LTE-based 5G terrestrial broadcast system
TS
1.2.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103720/01.02.01_60/ts_103720v010201p.pdf
The present document introduces the 5G Broadcast System along with the associated features of such a system. A concrete instantiation of a 5G Broadcast System is specified, referred to as LTE-based 5G Broadcast. LTE-based 5G Broadcast is a profile of existing 3GPP specifications that addresses all requirements of a 5G Broadcast System. Several functions and reference points are defined. Receiver categories are defined that address implementation profiles to deploy, among others, linear television and radio services.
103 718
CYBER; External encodings for the Advanced Encryption Standard
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103718/01.01.01_60/ts_103718v010101p.pdf
The present document specifies external encodings for AES. The external encodings specified in the present document can also be applied to other block ciphers; in particular, they can be applied to any block cipher with a block size of either 64 or 128 bits. The present document does not define clear-box transformations that are applied to obfuscate the implementation of the block cipher and the external encodings. Requirements related to the clear-box implementation of the external encodings are also outside the scope of the present document.
103 713
Smart Secure Platform (SSP); SPI interface (Release 18)
TS
18.0.0
http://www.etsi.org/deliver/etsi_ts/103700_103799/103713/18.00.00_60/ts_103713v180000p.pdf
The present document describes the SPI interface for the communication of an SSP, as defined in ETSI TS 103 666-1 [1] using the SCL protocol.
103 713
Smart Secure Platform (SSP); SPI interface (Release 17)
TS
17.1.0
http://www.etsi.org/deliver/etsi_ts/103700_103799/103713/17.01.00_60/ts_103713v170100p.pdf
The present document describes the SPI interface for the communication of an SSP, as defined in ETSI TS 103 666-1 [1] using the SCL protocol.
103 713
Smart Secure Platform (SSP); SPI interface (Release 16)
TS
16.0.0
http://www.etsi.org/deliver/etsi_ts/103700_103799/103713/16.00.00_60/ts_103713v160000p.pdf
The present document describes the SPI interface for the communication of an SSP, as defined in ETSI TS 103 666-1 [1] using the SCL protocol.
103 713
Smart Secure Platform (SSP); SPI interface (Release 15)
TS
15.6.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103713/15.06.01_60/ts_103713v150601p.pdf
The present document describes the SPI interface for the communication of an SSP, as defined in ETSI TS 103 666-1 [1] using the SCL protocol.
103 707
Lawful Interception (LI); Handover Interface for HTTP delivery
TS
1.11.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103707/01.11.01_60/ts_103707v011101p.pdf
The present document provides the handover details for HTTP delivery of LI and LD. The present document applies in particular to messaging services, but is not limited to messaging services. The delivery of streaming content is not in the scope of the present document.
103 706
Digital Enhanced Cordless Telecommunications (DECT); Advanced Audio Profile;
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103706/01.01.01_60/ts_103706v010101p.pdf
The present document specifies a set of functionalities for the support of advanced audio services over the DECT air interface. All DECT devices claiming to be compliant with this application profile will offer at least the services defined as mandatory. In addition to these, optional features can be implemented to offer additional DECT services. The aim of the present document is to guarantee a sufficient level of interoperability and to provide an easy route for development of DECT advanced audio applications.
103 705
Lawful Interception (LI); Data Structures for Lawful Disclosure
TS
1.4.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103705/01.04.01_60/ts_103705v010401p.pdf
The present document specifies flexible and extensible data structures for Lawful Disclosure for use in combination with existing handover interface standards, e.g. ETSI TS 103 120 [i.1] or ETSI TS 103 462 [i.2]. Data structures are not limited to telecommunication-specific data.
103 701
Cyber Security (CYBER); Cyber Security for Consumer Internet of Things:Conformance Assessment of Baseline Requirements
TS
2.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103701/02.01.01_60/ts_103701v020101p.pdf
The present document specifies a conformance assessment methodology for consumer IoT devices, their relation to associated services and corresponding relevant processes against ETSI TS 103 645 [1]/ETSI EN 303 645 [2], addressing the mandatory and recommended provisions as well as conditions and complements of ETSI TS 103 645 [1]/ETSI EN 303 645 [2] by defining test cases and assessment criteria for each provision. The present document intends to support suppliers or implementers of consumer IoT products in first-party assessment (self-assessment), user organizations in second party assessment, independent testing organizations in third party assessment and certification and conformance declaration scheme owners in operating harmonized schemes. Defining a certification or conformance declaration scheme is out of scope of the present document. The present document intends to contribute to the protection of consumer IoT products against the most common cybersecurity threats. Multi-medium or highly targeted/sophisticated attacks and thus the invasive analysis of hard- and software modules is out of scope of the present document. The Test Scenarios (TSOs) are targeting basic effort regarding test depth and test circumference in accordance to ETSI TS 103 645 [1]/ETSI EN 303 645 [2] which addresses a baseline security level. Due to the heterogeneity of consumer IoT devices, ETSI TS 103 645 [1]/ETSI EN 303 645 [2] and therefore the associated test groups in the present document are formulated in a generic manner. Thus, the present document does not describe specific tools or detailed step-by-step instructions. The test cases are intended to be performed by competent bodies that have the expertise to derive a suitable test plan.
103 701
CYBER; Cyber Security for Consumer Internet of Things: Conformance Assessment of Baseline Requirements
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103700_103799/103701/01.01.01_60/ts_103701v010101p.pdf
The present document specifies a conformance assessment methodology for consumer IoT devices, their relation to associated services and corresponding relevant processes against ETSI TS 103 645 [1]/ETSI EN 303 645 [2], addressing the mandatory and recommended provisions as well as conditions and complements of ETSI TS 103 645 [1]/ETSI EN 303 645 [2] by defining test cases and assessment criteria for each provision. The present document intends to support suppliers or implementers of consumer IoT products in first-party assessment (self-assessment), user organizations in second party assessment, independent testing organizations in third party assessment and certification and conformance declaration scheme owners in operating harmonized schemes. Defining a certification or conformance declaration scheme is out of scope of the present document. The present document intends to contribute to the protection of consumer IoT products against the most common cybersecurity threats. Multi-medium or highly targeted/sophisticated attacks and thus the invasive analysis of hard- and software modules is out of scope of the present document. The Test Scenarios (TSOs) are targeting basic effort regarding test depth and test circumference in accordance to ETSI TS 103 645 [1]/ETSI EN 303 645 [2] which addresses a baseline security level. Due to the heterogeneity of consumer IoT devices, ETSI TS 103 645 [1]/ETSI EN 303 645 [2] and therefore the associated test groups in the present document are formulated in a generic manner. Thus, the present document does not describe specific tools or detailed step-by-step instructions. The test cases are intended to be performed by competent bodies that have the expertise to derive a suitable test plan.
103 698
Emergency Communications (EMTEL); Lightweight Messaging Protocol for Emergency Service Accessibility (LMPE)
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103600_103699/103698/01.01.01_60/ts_103698v010101p.pdf
The purpose of the present document is to describe a lightweight session based emergency chat protocol that extends the base messaging functionality as defined in ETSI TS 103 479 [1]. The messaging service is based only on methods of the SIP signalling plane and interworks with Border Control Function, Emergency Service Routing Proxy, Emergency Call Routing Function, Public Safety Answering Point, the Location Information Server. It is important to emphasize that the introduced feature is an alternative to MSRP, real-time text or, in general, total conversation and not a replacement.
103 697
Intelligent Transport Systems (ITS); Architecture; Multi-Channel Operation (MCO) for Cooperative ITS (C-ITS); Release 2
TS
2.1.1
http://www.etsi.org/deliver/etsi_ts/103600_103699/103697/02.01.01_60/ts_103697v020101p.pdf
The present document provides the C-ITS Multi-Channel Operations functional architectural of the C-ITS architecture including the definition of requirements to the MCO entities, MCO mechanisms, MCO interfaces and MCO related application requirements.
103 696
Intelligent Transport Systems (ITS); Communication Architecture for Multi-Channel Operation (MCO); Release 2
TS
2.1.1
http://www.etsi.org/deliver/etsi_ts/103600_103699/103696/02.01.01_60/ts_103696v020101p.pdf
The present document specifies Multi-Channel Operation (MCO) related requirements which are applied on the Release 2 C-ITS communication architecture. It extends the Release 1 communication architecture as defined in the ETSI EN 302 665 [i.1] for MCO. The present document is based on the Release 1 specifications as specified in the ETSI TR 101 607 [i.2], as well as the Release 2 ETSI EN 302 890-1 [i.3], ETSI TR 103 439 [i.6], and other ITS standards as the ISO CALM architecture ISO 21217:2014 [i.9], the IEEE WAVE architecture IEEE 1609.3 [i.11] and the LTE architecture ETSI TS 136 300 [i.10].
103 695
Intelligent Transport Systems (ITS); Access layer specification in the 5 GHz frequency band; Multi-Channel Operation (MCO) for Cooperative ITS (C-ITS); Release 2
TS
2.1.1
http://www.etsi.org/deliver/etsi_ts/103600_103699/103695/02.01.01_60/ts_103695v020101p.pdf
The present document specifies Release 2 C-ITS access layer MCO extensions based on Release 1 backward compatibility.
103 689
Digital Audio Broadcasting (DAB); Filtered Information Service (FIS); Application specification
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103600_103699/103689/01.01.01_60/ts_103689v010101p.pdf
The present document establishes an optional extension to the broadcast standard for Digital Audio Broadcasting (DAB) system. The Filtered Information Service (FIS) is a data application that allows service providers to deliver information to groups of receivers with configurable filters, for example, text language, model number, date of registration, etc. The XML framework and transport specification are defined.
103 683
Mobile Standards Group (MSG); Testing; Next Generation eCall High Level Application Protocol (HLAP) Interoperability Testing
TS
2.1.1
http://www.etsi.org/deliver/etsi_ts/103600_103699/103683/02.01.01_60/ts_103683v020101p.pdf
The present document defines Interoperability Test Descriptions for the NG eCall High Level Application Protocol (HLAP).
103 683
Mobile Standards Group (MSG); Testing; Next Generation eCall High Level Application Protocol (HLAP) Interoperability Testing
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103600_103699/103683/01.01.01_60/ts_103683v010101p.pdf
The present document defines Interoperability Test Descriptions for the NG eCall High Level Application Protocol (HLAP).
103 681-4
Reconfigurable Radio Systems (RRS); Radio Equipment (RE) information models and protocols for generalized software reconfiguration architecture; Part 4: generalized Radio Programming Interface (gRPI)
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103600_103699/10368104/01.01.01_60/ts_10368104v010101p.pdf
The scope of the present document is to define the generalized Radio Programming Interface (gRPI) for radio equipment reconfiguration. The work is based on the Use Cases defined in ETSI TR 103 585 [i.1], on the system requirements defined in ETSI TS 103 641 [1] and on the radio reconfiguration related architecture for radio equipment defined in ETSI TS 103 648 [i.2]. The present document will be based on ETSI EN 303 146-4 [i.4] and provide a generalized interface definition for the generalized Radio Programming Interface (gRPI).
103 681-3
Reconfigurable Radio Systems (RRS); Radio Equipment (RE) information models and protocols for generalized software reconfiguration architecture; Part 3: generalized Unified Radio Application Interface (gURAI)
TS
1.1.1
http://www.etsi.org/deliver/etsi_ts/103600_103699/10368103/01.01.01_60/ts_10368103v010101p.pdf
The scope of the present document is to define an information model and protocol for unified radio application interface for radio equipment reconfiguration. The work is based on the Use Cases defined in ETSI TR 103 585 [i.1], on the system requirements defined in ETSI TS 103 641 [1] and on the radio reconfiguration related architecture for reconfigurable RE defined in ETSI TS 103 648 [i.2]. The present document will be based on ETSI EN 303 146-3 [i.6] and provide a generalized interface definition for the generalized Unified Radio Application Interface.