query
stringlengths 20
2.05k
| pos
sequence |
---|---|
What are the dimensions of the tray? | [
"The interior measurement, litter space, is 14\" by 10\" approx. but the tray has a wide trim, total size is 19.5\" by 12\". The litter inside is not very deep so I add more on top. Hope that helps."
] |
my puppy is 8lb. will it work? | [
"Yes, but only use the vibrate mode. It will startle but not hurt. Give the command you want, then if no response push only once. The startle will go with the unwanted action. We tried both modes on ourselves.So we would know what our dog would feel. The shock was way to much. But the vibrate was fine. I wish there was a intensity level adjustment. Remember to check the batteries in both the collar and remote. We have a small dog who thinks he needs to bark all the time and usually at nothing. Now all we say is\" quiet or do you need your collar on\" and he's quiet. He no longer wears his collar all the time, and it only took about 20- 30 mins. for him to learn. Use the vibrate. Yes, but only use the vibrate mode. It will startle but not hurt. Give the command you want, then if no response push only once. The startle will go with the unwanted action. We tried both modes on ourselves.So we would know what our dog would feel. The shock was way to much. But the vibrate was fine. I wish there was a intensity level adjustment. Remember to check the batteries in both the collar and remote. We have a small dog who thinks he needs to bark all the time and usually at nothing. Now all we say is\" quiet or do you need your collar on\" and he's quiet. He no longer... » Read More Yes, but only use the vibrate mode. It will startle but not hurt. Give the command you want, then if no response push only once. The startle will go with the unwanted action. We tried both modes on ourselves.So we would know what our dog would feel. The shock was way to much. But the vibrate was fine. I wish there was a intensity level adjustment. Remember to check the batteries in both the collar and remote. We have a small dog who thinks he needs to bark all the time and usually at nothing. Now all we say is\" quiet or do you need your collar on\" and he's quiet. He no longer wears his collar all the time, and it only took about 20- 30 mins. for him to learn. Use the vibrate. « Show Less",
"The medium size collar will be too big for an 8 lb puppy. You may want to buy a size small or extra small.",
"No.... I sent the product back as it poorly made. I could not get the collar open to insert battery. I partially destroyed it with tools and could still not get it open.",
"Yes it will but you may want to pay a little more for better quality. Ours worked great until it was time to change the batteries, then the whole unit fell apart -both pieces.",
"Our dog was about 15lbs and we had to put it as tight as it would get, so I think it might be to big."
] |
Will this mobo support an i3 2130 cpu | [
"I checked the \"CPU support List\" on the Gigabyte site, and yes it will support the i3 2130",
"Yes it is supported.You can find the list of supported CPUs here http://www.gigabyte.us/support-downloads/cpu-support-popup.aspx?pid=4192"
] |
How much weight this product? | [
"I got them formy daughter as a gift, she likes using glass over plastic and she loves them, they are not that heavy and stack really well. They don't seem heavy even when stacked for easy storage."
] |
The only things I need:- 'Are spares readily available? What is the temperature range and has it a range of flat/chisel tips'? I don't see these?. | [
"Spares readily available. Hakko is large company been in business 50+ years. Temp range is 120° to 900°. Gazillion tips available. Search \"hakko t18 tip\" on amazon. Look at hakko website for complete list.",
"Spares readily available. Hakko is large company been in business 50+ years. Temp range is 120 to 900. Gazillion tips available. Search \"hakko t18 tip\" on amazon. Look at hakko website for complete list.",
"There are tons of high quality tips available, check the Hakko web site here: http://www.hakko.com/english/products/hakko_fx888d_tips.html#productNav As for temp range this unit is variable and will answer all your needs. The only units better cost hundreds more. I love my unit which I use for guitar mods from light heat wire solders to high heat soldering to the back of potentiometers. No worries and plenty of options with the Hakko fx-888."
] |
Will this fit a Men's Sierra 2? | [
"Since the Sierra 2 has a 26\" frame the rear folding rack should fit. It will attach to the rear wheel bolt and the adjustment for the seat height",
"I would think it will, it has a lot of adjustments to fit most bikes. It's a really nice rack, would definitely recommend it.",
"Not sure, but I would think so. Most bike parts are universal fit. It fit a Giant with some difficulty, and fit a Schwinn perfectly.",
"I am not familiar with the geometry of the Sierra 2, but this rack has so many adjustments, I would imagine it will fit practically any bike."
] |
How do you know which size you would need? | [
"I just googled it but couldn't find much information so I went with the average size and it worked.",
"Go to Medela website for more info. Honestly I have 3sizes and use them all. My son is 8months old and I've used it every day since he was a week old",
"My lactation consultant told me that almost everyone is 24mm. I tried going down a size and it was incredibly uncomfortable. Its always worth asking your lactation consultant if you're unsure.",
"It's hard to determine size without an actual shield. I would recommend buying the standard (24mm), and then checking it against this guide (that is what I did), and then see if you need to return it for a different size. http://www.medela.com/IW/en/breastfeeding/good-to-know/right-size-of-breastshield.html"
] |
Is the jar plastic or glass? | [
"A very high quality plastic. We have had ours for over a year and have no scratches or dulling. If you clean it right after use, per the instructions you have hardly any scrubbing to do. Just a warm water rinse and dry.",
"The container is a type of plastic. I will say this is the best blender I have ever had and I love it"
] |
Is this also a fax machine | [
"Yes, it can send and receive faxes, tho I only use it to send. I'm on my second MP830, the first one worked perfectly for 6 yrs, until a rubber band popped into the feed mechanism, unbeknownst.",
"It has fax capability (send/receive) though I wouldn't call it a \"fax machine.\" Dedicated fax machines typically have a lot more fax-specific features you won't find on any multi-function machine. If you want to occasionally send or receive a fax, this will do just fine.",
"Yes it's got a phone jack and works for sending or receiving faxes. I do think it wouldn't fax a double sided document (it only faxed it single sided skipping every other page) which really frustrated me at one point since it will scan double sided documents.",
"Yes, it is also a fax. I have never used the fax feature so I can't speak to it's utility as a fax, but the machine is a printer/scanner/copier/fax. It has always worked very well and I have no complaints except that it has a voracious appetite for ink.",
"It is also a fax machine. Bad product. Difficult to use Dont buy it. It gulps ink. Expensive ink you can only get from canon."
] |
Do this product has "+tax" at the end of price? | [
"Unfortunately this listing does not include a real Monarch part No. so it is a guess what you will receive. I sell these labelers and my default model I sell is the 1131-01 (Monarch part no. 113101) The 1131-01 does have a \"+tx\" option in the last print band. The Monarch 1131-01, 1131-02, 1131-03 and the 1131-09 all have the +tx in the last print band but all have different band configurations. I sell the 1131-01 because customers find it to be the most useful print band configuration for general pricing situations. I recommend you search for a listing for the Monarch 1131-01 which displays a picture of the print band configuration so you know exactly what you are getting. Unfortunately this listing does not include a real Monarch part No. so it is a guess what you will receive. I sell these labelers and my default model I sell is the 1131-01 (Monarch part no. 113101) The 1131-01 does have a \"+tx\" option in the last print band. The Monarch 1131-01, 1131-02, 1131-03 and the 1131-09 all have the +tx in the last print band but all have different band configurations. I sell the 1131-01 because customers find it to be the most useful print band configuration for general pricing situations. I recommend you search for a listing for the Monarch 1131-01... » Read More Unfortunately this listing does not include a real Monarch part No. so it is a guess what you will receive. I sell these labelers and my default model I sell is the 1131-01 (Monarch part no. 113101) The 1131-01 does have a \"+tx\" option in the last print band. The Monarch 1131-01, 1131-02, 1131-03 and the 1131-09 all have the +tx in the last print band but all have different band configurations. I sell the 1131-01 because customers find it to be the most useful print band configuration for general pricing situations. I recommend you search for a listing for the Monarch 1131-01 which displays a picture of the print band configuration so you know exactly what you are getting. « Show Less"
] |
This phone is unlocked friend | [
"The Sprint Evo is a wonderful phone. If you are having some problems please call Sprint! They can help you with any problems with the phone."
] |
Is the item large size? last time by mistake i bought the same item in small size and have to return it. Can you please confirm? | [
"Hi, I bought this item. Make sure that the model is listed as CTH 661. If it is, the total size of the tablet is 9\"x13.5\". The drawing area is about 5.5\" x 9\". Big enough for my digital painting needs, and I have 2 monitors side-by-side. I hope this helps. Cheers!",
"My apologies that this took so long, if you're still interested in know, this item has a drawing surface roughly 8.5 by 11 inches in size (about the size of computer paper). and then it has an outside edge. It is not a small tablet by any means.",
"I would suggest to check the dimensions listed to see for yourself if it meets your needs. This particular tablet is a middle of the road \"medium size\" if you ask me. I can lay a sheet of copy paper over the entire surface and the drawing surface is, indeed, somewhat smaller. But a lot can still be done with it. I'd call it a good tablet at a fair price. I'd buy it again if the need should arise."
] |
Will this fit Singer 8780 Curvy sewing machine? | [
"I looked at your machine online, and it appears that it would fit based on the type of shank you have and the feet available for it. If it doesn't, Amazon is very good about returning an item that doesn't work."
] |
Editing Video with Windows Movie Maker Does anyone know if the video shot with this carmera can be edited with Windows Movie Maker? I would prefer to use Movie Maker versus buying editing software and I've seen way too many issues with various cameras shooting video that can't be edited in Movie Maker. Editing Video with Windows Movie Maker Does anyone know if the video shot with this carmera can be edited with Windows Movie Maker? I would prefer to use Movie Maker versus buying... » Read More Editing Video with Windows Movie Maker Does anyone know if the video shot with this carmera can be edited with Windows Movie Maker? I would prefer to use Movie Maker versus buying editing software and I've seen way too many issues with various cameras shooting video that can't be edited in Movie Maker. « Show Less | [
"Thanks - I'll try it (may be worth upgrading to their pro version if it really works).",
"I've been wondering the same thing. When i try to import videos from the camera to windows movie maker it says they are in the wrong format.",
"JVC MOD files open perfectly in Nero Vision. Renaming them to MPG for me caused them not to play correctly in WMP (and no sound), and they would not open in Quicktime Pro. Bad choice by JVC.",
"I have a JVC mg555, and I just changed a vid file ext to .mpg.WMM imports it, but is not reading the video part only audio. Weird. I am still working on it.",
"There is a free program called Prism Video conversion. Put the MOD file into it and out comes a MPG to play with.Here is the link to their site.http://www.nchsoftware.com/prism/index.html",
"I just read that the .MOD extension of the JVC can be changed to .MPG for recognition by Windows Media Player and should work with other software since it is a standard format. (You can do this by copying the file onto your PC, right clicking and renaming. With this extension you should be able to burn to a DVD. I am interested in purchasing this camcorder but will NOT do so if I have to purchase extra software. If someone tries this, please let me know if you are successful. JVC appears to receive much better reviews than Sony other than the burning issues. The article I read can be found at http://www.usatoday.com/tech/products/2006-12-06-camcorder-hard-drives_x.htm. I just read that the .MOD extension of the JVC can be changed to .MPG for recognition by Windows Media Player and should work with other software since it is a standard format. (You can do this by copying the file onto your PC, right clicking and renaming. With this extension you should be able to burn to a DVD. I am interested in purchasing this camcorder but will NOT do so if I have to purchase extra software. If someone tries this, please let me know if you are successful. JVC appears to receive much better reviews than Sony other than the burning issues. The article I read can be found... » Read More I just read that the .MOD extension of the JVC can be changed to .MPG for recognition by Windows Media Player and should work with other software since it is a standard format. (You can do this by copying the file onto your PC, right clicking and renaming. With this extension you should be able to burn to a DVD. I am interested in purchasing this camcorder but will NOT do so if I have to purchase extra software. If someone tries this, please let me know if you are successful. JVC appears to receive much better reviews than Sony other than the burning issues. The article I read can be found at http://www.usatoday.com/tech/products/2006-12-06-camcorder-hard-drives_x.htm. « Show Less",
"I use Windows Movie Maker exclusively with my camera, and have had NO issues whatsoever with importing the files, or editing of the files using this software. It may not show up in the folder as a \"media\" file, but if you check all files, then you are able to import the raw video and edit away. Took me maybe 15 minutes to edit my first video with this camera and software."
] |
entry level portable gps: Seems like MIO's ability to set multi waypoints is a distinguishing characteristic that others don't have.. and that's how most of us travel locally, right? | [
"I'm surprised no one has given you a suggestion. On the off chance you are still looking, I'll add a comment or two. Obviously, any of the units you have listed \"could\" do the job very well (I've heard good and bad things about each of them). Multiple routing (which my unit doesn't have) would be very nice to have if it's implemented properly. I originally wanted the Magellan because I liked its features better than the others (especially the AAA feature), but didn't want to take a chance (their customer support is terrible). And any unit that allows you to exclude/avoid a road is a good one to get. The Nuvi 200 really is a basic unit and has no Text-to-Speech (which I prefer even though some names are butchered). The 200 also comes with only the lower 48 states (adding Canada can get very expensive), so I would suggest the 250 or 260 (the 260 has TTS). The newer 260W (wide-screen) is probably priced too high right now. As far as ease of use, they all work similarly, but Garmins are probably the easiest and most logical (with Magellan a close second). TomTom will give you many more customizable options, plus has Mapshare (a really great idea). No matter what you decide to get, I'm sure you will be pleased. Just remember that they all have various quirks (even the big, expensive models)."
] |
Can this phone be used internationally, in Europe and Africa and is it tethered capable? | [
"The best way to check is to find out the band-width in those continents you mentioned. Since this phone is Quadband, so I would assume it should work anyplace. At least, it works in both Asia and America."
] |
Why is this Shea butter color yellow not Ivory?Is there any differences between yellow and ivory colored Shea butter? | [
"The yellow is at its purest and natural state. Where as the white has be altered which means its not at its purest or natural state."
] |
Is the mop pad reusable? | [
"The swiffer is reusable. The swiffer wifes must be discarded after each use.",
"There is a rubber mop head that the mop sheets attach to. The mop sheets are single use but the mop head doesn't need to be replaced (maybe it would with heavy use). However, you don't \"mop\" without the disposable part."
] |
Would this work as a piano light? | [
"Not sure what to say. My initial reaction would be that's it's too high. I don't see it working with an upright. If you're talking about a keyboard or a grand then perhaps. Take into account the size of the base. I would think it would be too bright. It's an excellent light. I use them constantly. But I don't think I would buy it to use with a piano. Sorry I can't be more definite. Does Softech have a website that could offer more info?"
] |
Should I seal this if I get it? TIA! | [
"I would! I've had mine for about a year and it gets wet every day. It is starting to show mildew. If yours will be getting wet every day, sealing it would be a good idea. It's a good product but I didn't think bamboo would mildew for some reason.",
"I didn't seal it and it's holding up just fine! No visible wear and tear. :)",
"You can it probably wouldn't hurt. I didn't and it is holding up just fine."
] |
i want to use this to extend a dazzle's usb cord to my pc,would this work? plz reply | [
"I believe it should, but I'm not too sure what a dazzle usb cord is. I use this to extend my xbox 360 controller pc dongle to the couch (about 5 feet away) and it works well. I can play pc games on my big screen television."
] |
How do you fold the handle straight to use it? | [
"There's no button or release for folding the dryer. Your left hand grabs the side where the air comes out, and your right hand grabs the handle. Then, you just push the two sides toward each other. There's a fairly solid click in doing so.",
"Between the main head of the hairdryer and the handle with the cord, it folds and opens with a click. When folded, the handle rests on the underside of the main head (blower part) of the hairdryer. Very easy."
] |
is there a trick to getting the bulb out when it needs replacing? | [
"no trick really, you just have to be brave! with the lamp unplugged , pull straight out on the bulb, keeping it flat against the lamp shade there is not much clearance and I am always afraid the glass will shatter, but it never has. good luck!",
"Be sure to unplug lamp and let bulb cool down. I use one of those garden gloves with little plastic dots to get a better grip on bulb:-) The directions read like this. \"Grasp the tube firmly, angle it very slightly down, then pull it from socket.\" Mostly it is a matter of a firm grip.",
"Actually haven't had a problem with that. My bulb tends to fall out when you close it up, so I open it carefully",
"I remember just being very careful by holding the two bulbs securely and then pulling straight out (the pair of tubes are attached if I remember correctly.) I still have my old one, but I replaced it with the new model and haven't tried the old one again. It works fine though. It's a great light. I am very pleased with both of them. Good luck to you. You can do it!!! It's a great desk light -- BOTH of them are.",
"Umm, not really! You have to gently pull it out, then gently push it back in! If I could put my hand on my replacement build with instructions, I would tell you for sure! Now I've got to look for it! lol Make sure you unplug it first for safety! Hope this helps! Good luck!",
"Umm, not really! You have to gently pull it out, then gently push it back in!If I could put my hand on my replacement build with instructions, I would tell you for sure! Now I've got to look for it! lolMake sure you unplug it first for safety!Hope this helps!Good luck!",
"Not that I know of. I simply just pulled it out, but after it had cooled down."
] |
Is there much of a difference from this card to the GTX 650 Ti Boost 1gb superclocked? | [
"Are you trying to compare this EVGA with the MSI power edition??? If this is OK then choose MSI with eyes closed, it's better. If I'm wrong, I can't help you jejeje maybe this page can help you, but I think it will no answer your question. http://www.videocardbenchmark.net/high_end_gpus.html"
] |
the threads are on the inside of my faucet when I stick my finger up in it. will it work on my faucet? is a screen on other end? | [
"Yes threads on the faucet would need to be on the inside. Diameter of threads is around 3/4 of an inch. So if your faucet has a real small thread it won't fit. I bought this product a couple months ago it's pretty cool. Great for kids but it also works like a night light when you turn the water on its pretty bright",
"Making sure you realize, I am NOT the seller of this item. But faucet add-ons are all similar. Un-screw the old piece. Should only be half inch to inch max in height. There will be threads on the inside of the faucet (where the water comes out). There will be threads on the outside of the attachment. Simply screw it in once the original faucet piece is off.",
"yes. You have to remove the other tiny one- it's super small- and then it screws in. And yes- there is a screen on the end where the water comes out. :D I have the one that came as one single piece- I see there are a couple of 'versions'.",
"yes it has its own screen, but it is on the end that threads into ur faucet. This product comes with a rubber washer, so if the threads do not match perfectly, it should still work if you tighten it enough for the rubber washer to make contact.",
"It is designed for a faucet like yours with inside threads. However it only fits one size. Most American faucet sprays come with thread adapters to accommodate different size threads. I was lucky, it fit both of my faucets. If you get it and it fits your faucet, make sure you use some pipe dope on the threads and tighten securely to prevent small drips. It works as advertized and my grandchildren think that they are \"neat\".",
"Yes it should work with yours then. Yes it has a screen close to the top where it screws into the faucet."
] |
Description mentions Tilt locking head, however it dies not say if the head is detachable, can you please let me know? | [
"I have never detached the tilt locking head and I will be afraid that I will not be able to put it back together. It happened prior to this new mixture. So, I suggest that you get the hand mixture. Thank you.",
"http://www.sunbeam.com/kitchen-appliances/mixers/stand-mixers/002591-000-000.html#start=16&sz;=12",
"Yes, Gustavo, the head is detachable. Sorry for the delay in responding to you."
] |
Is the random setting truly random? | [
"not really. Every time you turn the frame on, the random setting follows the same order which is different from the normal order but it always stays the same.",
"It appears random to me. We put in a bunch of \"special events and holiday\" photos and they will show a kindergarten graduation followed by Santa Claus and then a child's play."
] |
how long do the batteries last at a decent high volume? | [
"Not sure. I used it on/off for 4 hours. It last longer than my cell phone battery used as the music source."
] |
Where are these made? | [
"Can not tell ya, I can't find out the information about \"where they are made\" on Vortex website. They are in south central Wisconsin. Call them and ask (800) 426-0048 I have used there products for a long time and they are one of the best; especially with their absolute no-hassle warranty policy--it breaks they fix it or replace it.",
"China I believe. I can tell you that I was happy happy with the mount and would buy it again. Some people think it's over priced.",
"It depends on the item. Vortex makes some things in Japan, China, and Philippines. All the designing, engineering and quality control are done in Wisconsin. They are a small company and they will answer the phone and answer questions too (800-426-0048). I bought a scope and a ring mount from them. The scope was made in Japan and the ring mount was made in China. I've not had to tighten the mount a single time after 7 months and about 400 rounds through my AR.",
"They are made in China but like other reviewers advise they are good quality, good value for money and wont break the bank! sure there are better options out there but hey that's with pretty much everything else in life, if your on the fence pull the trigger you would no be disappointed unless your a tear one operator! :)",
"Sad but true China, states it right on the box. If it were USA, you would pay 50% more. The quality is good. This is my second unit. Good luck.",
"Can not tell ya, I can't find out the information about \"where they are made\" on Vortex website. They are in south central Wisconsin. Call them and ask (800) 426-0048I have used there products for a long time and they are one of the best; especially with their absolute no-hassle warranty policy--it breaks they fix it or replace it."
] |
Hi, how is the mattress supported - are there slats, and if yes, how many? THANK you all! | [
"There are two solid boards that run the full length and width of the mattress - it is as if it sits on a raised platform, above the drawers.",
"The mattress is supported by flat boards. I think they call them bunk boards. these boards are attached to the frame with wood screws and for the most part keeps movement on the bed quiet. There are still some movement noises, but attaching the boards does quiet it a lot.",
"Trying to remember. But I do believe there is a compressed board that is in sections but does completely cover the mattress base. The drawers are cheaply made and didn't last though :-("
] |
does the Greenway filtration system fit on a Clover dispenser? | [
"I don't own the Clover dispenser, so I am not sure. From my opinion, the would be fine, the dispenser top loader should be standard. I am using the Aquverse dispense I bought at Costco. Having using Greenway filtration for 2 years now. I am very happy with it.",
"I don't know if it will or not I use it with a Greenway Water Dispenser Filtration System and the water is out of this world.",
"If a 5 gallon jug fits it, if its open. Not sure about cabinet type, but it's the size of a five gallon jug Check (the height mine is 15\" TALL). I love mine."
] |
Why does this cost more than the Browning BR-1030-UHF 3-5/8 NMO mag mount? Is there a difference between them? | [
"There doesn't appear to be much difference besides the finish, I would by the cheaper of the two. I have used these bases for VHF-low, VHF and UHF Ham Radio with no complaints!"
] |
Platform - XP - what about Vista: Just bought new computer with Vista...will this program work with it? | [
"I have VISTA and downloaded the trial version from Microsoft and it works fine."
] |
is it easy to clean? how long does it take to clean (in minutes)? | [
"Some people on here are saying clean up is a 2 minute rinse and that is simply not true, unless they don't care about cleanliness. If you actually want to scrub your filter to be free of food particles (my definition of clean), it's going to take 5 minutes minimum, and that includes cleaning the auger, the restrictor, and the screen, as well as any food that was pushed out the wrong end up against the base of the motor.",
"About 2 to 3 minutes..Really very easy to take apart and put back together.Great machine..",
"I use it EVERY day. It takes me under 3-4 min to disassemble, rinse and reassemble for next use. Easy. No trouble. Love this machine.",
"Clean up is simple, easy and takes less than five minutes. Just pop off the attachments, rinse, place in soap and water, drain and they are ready for the next juicing.",
"Cleaning is really kind of a pain with most juicers. I tend to make a lot and freeze some in individual servings because the clean up is kind of a pain.",
"very easy to clean just soak in cold soapy water, rinse with cold water clean the screen with a dishcloth.",
"It doesn't take long. I would say 2 minutes. Parts come off very easily and just wash them under lukewarm water. Brush the screen/filter for 15 seconds. We use this machine almost everyday.",
"It is very easy to clean and disassemble and assemble back. It takes about 3-4 minutes to disassemble and clean. I would totally recommend buying this juicer.",
"I would not recommend this for any green juices. I had a Green Power Twin Gear Juicer that was lost in our move and it was much better. It is ok for fruit juicing only - even with the Greens attatchment it is not as good as the Green Power."
] |
i didnt get a user manual. is there a user manual online? | [
"You can use any android Manual because all it talks about is basic stuff nothing indept."
] |
Will it worth with mighty mite 1342053770 | [
"Honestly, I don't know. My vacuum model was called \"the Boss\" and it fit perfectly. It is a better hose than the original that came with my vacuum. The Mighty Mite looks like my Boss. If your vacuum uses the MM bags, it should fit."
] |
Will these fit over the regular floor mats? Or do you have to remove the regular floor mats to install these? | [
"I put them over the regular floor mats with no problem. The front mats are a little tight to clip in, but they stay in place. I bought these for my wife's G35 and she loves them...even though they have the G37 emblem on them. Do not attempt to clean these with a pressure washer. Since they scuffed up fairly easy from black heeled shoes, i thought using a pressure washer with a 40 degree head would clean them quickly. It did, and unless you are extremely careful, the water pressure will leave cut marks. Use a brush and a little elbow grease instead. They clean nicely.",
"The front ones can fit over the regular floor mats but they are so thick that you can't really have them clip in. The back ones obviously aren't a problem. The color also isnt as off as others have said. These mats are currently saving my cars lighy interior!",
"You would remove the original rug type mats. These are more wet, sloppy weather mats. Very heavy duty/thick mats that use the same snap holes as the original. The rubber mats have a slight satin texture that is somewhat difficult to clean dirt off. I changed out the mats during the rainy season or when I take the car to the shop for work so the nice rug mats don't get trashed.",
"The manuf. SUGGESTS that they NOT be placed over the regular \"carpet\" mats. But I have them installed right over the regular mats and they fit. It's a hair \"tight\" to get the floor posts through all of the holes -- but you can do it with a minimum of effort. I think it's safe enough. I really LIKE these rubber mats.Good luck!"
] |
sizing - how is it done | [
"Palm width(7-8) SIZE M Palm width(8-9) SIZE L Palm width(9-10) SIZE XL Palm width(10-11) SIZE XXL HOPE IT IS HELPFUL",
"Before my purchase of these gloves I read the reviews, particularly the review that mentioned the size issue. With that in mind, I ordered XL instead of L and they fit perfectly! What you must keep in mind is that these gloves ARE made in CHINA, so you never know what you will receive. I must say that the retailer gets the product out to you as though he were in the states. Take the chance, you will not regret it. Hope this helps. Johnny D"
] |
mine keeps freezing. am i doing something wrong? maybe in settings? i have to take the battery off to reset it. any other way to reset it? | [
"I do the same thing... and then it is fine! I quess will. Check for soft ware update?? You could try. Factory restore. Also... in case.. you picked up a virus... Sorry... I'm. Not much help.",
"Mine is having the same problems as well, ialong with other problems.. Thats why I am returning it and getting my money back",
"No cause mines does it sometimes I just reset mines but I still like the phone"
] |
How is the battery life? | [
"I have had it for a few months. Use it a few hours a week. Haven't had to replace the batteries yet.",
"l just used it for two months before it stopped being compatible to my surface rt & it was fine",
"I can't say over the long-term, but I have had mine for three months, I use it everyday for hours at a time, and I have not yet had to replace the battery."
] |
Can you easily open the bucket if you need to get to the storage inside? | [
"I use my bucket cover on my gardening bucket. Very easy to stand up and grab what you need to work on the job. Makes very nice to carry a seat and all your needed equipment in one trip. I LOVE IT.",
"If you mean open the lid, then yes, it is easy to open. But because of the design, it takes a slightly different pull on the lid. Instead of just lifting the lid straight up, I find it easier to lift at a slight angle.",
"Yes, no problem, it does not actually lock on the bucket. I use mine when fishing.",
"Yes, the lid does not lock/snap/seal the bucket. It just sits on top of it."
] |
220V Can this be used with 220V? | [
"This Pandigital PAN7000DW digital frame uses a 5V 2A adapter with barrel plug output. The AC input is 100-240V (universal voltage range).",
"I was wondering about that too. What sort of power input does this thing have? Most of these frames have 5V/1A DC input. That means the AC adapter converts 110V into that required input for the device. Does this device come with an adapter like that?"
] |
I have a silver plated bronze piece, where the the bronze has patinated through the silver. Will this work on that patinated bronze area? | [
"It did for my piece. was small very old cranberry dish, 1/2 of bottom had copper showing, after using, can not see copper",
"I don't know. I would read the product information on Amazon. If that doesn't answer your question, maybe you can contact the seller and ask them. Sorry."
] |
is it plastic or metal | [
"It's metal, with a rigid, frosted plastic ring around the mirror, which looks pretty sturdy. There's either rubber of plastic around the neck piece, for comfort. I bought this one because the last two plastic ones I had both broke. I'm very satisfied with this one. It's worth the price.",
"Hi, it's metal . I had a plastic one once it didn't last long before it broke off from tightening it. This one is metal and has that long bar at the bottom so it stabilizes the mirror and doesn't lean over or fall forward. I really like it . The best one I 've had.",
"It is metal. It really is nice. It's much bigger than I thought it would be. The part that goes around your neck has a cover over the metal so it will be comfortable on your neck. That piece feels like plastic but it is plastic over the metal. I had another cheaper mirror before and it broke quickly. You won't be disappointed with this one. I love mine and I use it every day."
] |
What is the hilt wrapped with? | [
"A leather like fabric. It's rather nice, but the glue isn't. After a month the wrapping came off, so I just used electrical tape to stick it back on.",
"It's wrapped with a cheap plastic ribbon that, on mine, was barely glued in place. Under that is a black plastic ribbon that holds the \"scales\" on the sides on. I removed the white plastic and wrapped the whole thing in paracord, and it's really comfortable.",
"Wood slabs taped with imitation leather over wrap. It does come loose so glue it or remove it tape the wood back down and wrap in para cord it's a great handle wrap done that way and won't slip or come loose if done right"
] |
Will this fit my Ipod Touch 5th Gen.? | [
"I bought the 60x viewer for my iPhone 5 which is a perfect fit to this item. The iPod touch which I also own is thinner than the iPhone. Since the 60x viewer comes with a case that fits the Iphone 5 it may not be completely compatible with the 60x viewer. I say compatible because the touch and the iPhone are the same length and width but not the same thickness. Because of that the lense in the touch will be in a slightly different position than the iPhone. Performance of the 60x viewer I would only rate as marginal because of the distortion over all but the inner one third of the viewing area. I bought the 60x viewer for my iPhone 5 which is a perfect fit to this item. The iPod touch which I also own is thinner than the iPhone. Since the 60x viewer comes with a case that fits the Iphone 5 it may not be completely compatible with the 60x viewer. I say compatible because the touch and the iPhone are the same length and width but not the same thickness. Because of that the lense in the touch will be in a slightly different position than the iPhone. Performance of the 60x viewer I would only rate as marginal because of the distortion over all but the inner one third of... » Read More I bought the 60x viewer for my iPhone 5 which is a perfect fit to this item. The iPod touch which I also own is thinner than the iPhone. Since the 60x viewer comes with a case that fits the Iphone 5 it may not be completely compatible with the 60x viewer. I say compatible because the touch and the iPhone are the same length and width but not the same thickness. Because of that the lense in the touch will be in a slightly different position than the iPhone. Performance of the 60x viewer I would only rate as marginal because of the distortion over all but the inner one third of the viewing area. « Show Less",
"Oohh, i dont really think so. Cuz the casing is fitted to the iphone 5, 5s... But i dont know, you could try this on the iPod touch of the same generation",
"I don't think so , because it fits only iPhone 5 /5s, anyway the pic is not good as I expected especially most of picture covered by frame of the lens .",
"I would not recommend this product. I think I threw mine away. Could not get it to focus and it was not well made. Sorry for the poor report."
] |
where on line can I get the user manual for A1100IS | [
"I got my PDF from Canon.... it's a digital copy of the original manual... Very complete and exceptionally helpful.",
"I would contact the Canon company . I have used them in the past and they were very helpful. Good luck, Fran",
"http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a1100_is#BrochuresAndManuals"
] |
Could we fold it for smaller baking pan?eg.half the size of this mat? | [
"Dear I. Hadianto, the mat is most effective when laid flat on a half sheet tray. The mat would still work but it doesn't fold like paper does so a quarter sized mat would probably your best option.I hope this helps.Kind regards,BrightSpring",
"Dear I. Hadianto, the mat is most effective when laid flat on a half sheet tray. The mat would still work but it doesn't fold like paper does so a quarter sized mat would probably your best option. I hope this helps. Kind regards, BrightSpring",
"I don't really know the answer to that question, but the mat is quite flexible and I imagine you could fit it into the smaller baking pan and just allow the extra length to hang over the edges of your pan. The seller seemed really helpful--they even followed up with some recipes by email, so I suggest you contact the seller. I bet they can answer your question. We've really enjoyed the product--it's been fun to use and works great. It's so easy and I'm glad I got it.",
"I have not tried to fold mine to use it to bake on as it doesn't really fold in half. Its made of silicone so is not really designed to be folded but it depends upon what you are baking you might not need to put it in a baking pan maybe just place it on a baking tray or similar."
] |
can this be used for baking bread? | [
"Yes you just make sure you buy the bread flour. I use the white bread one and I have found it is pretty good and better than any I have bought. I have read review on the Artisian one is also good and I plan to try that also. Everything I have purchased of Pamela products have been very good. If you have any further questions feel free to ask.",
"Pamela's does a great job of combining GF flours and starches for the best baking flavors. I have never used the pancake mix for anything other than sweet quick breads. It's fantastic for anything with a hint of sweet but I think you'd be better off with Pamela's GF Bread Mix.",
"The bag has recipes for:muffins, scones, banana loaf cake, and ways to make bread. Cake, cookies and biscuits are also included."
] |
will this fit my verizon g3 I535? | [
"this is for samsung s3 not sure put it in amazon.com to see what coes up these are cheap and great fit i bought 5 colors"
] |
does it use a REAL laser? | [
"Yes, a low-power one that can be somewhat mishandled without any problems. My grandson, age 11, loves it."
] |
The transmitter failed to activate the shutter. The antenna can be spinning all round. Is it possible that the antenna broken inside from other parts? | [
"Hello Sean,Yes, the antenna does spin freely. Make sure the cable is well connected to both camera and transmitterand make sure both devices are in the same channel.Please contact us for tech help if you continue having problems, thank you! 847.201.4623",
"Its possible the setting also could be the problem also the battery in how you insert them."
] |
So my hubby got these as a gift for Christmas this year. Problem being we don't do Apple products. Will these work on an android phone? | [
"They should with out a problem. They are designed as normal headphones not for a specific device.",
"It will still work on an Android device, however, the OE2i version allows you to answer calls on your iPhone. Therefore, if you purchase the OE2i version versus the OE2, then you won't be able to answer calls."
] |
Why does the product description say: Batteries 2 Lithium ion batteries required. (included) | [
"It's a mistake. Hard to fathom that there's a mistake on an Internet site as tiny as Amazon. �",
"Hi Bob, sorry for the confusion. Sony MDREX100IP Earphones doesn't require nor have any way to insert batteries. -Vincent",
"Bob, my product was ready to use right out of the box. I don't remember dealing with batteries."
] |
Can it display the clock constantly when AUX is in use with ipod or XM receiver? | [
"I've only had the clock display for a couple seconds after pressing the button."
] |
is the mocking jay pin a real pin | [
"Yes- it's a real pin - but NOT the kind w/ the horiz. \"pin\" that has to go thru something twice ( in, then out) & into the little circular closure. It's a single prong w/ a separate \"squeeze\" closure that goes on the underside of object U pin it to. It's very sturdy as it has been moved regularly since Xmas (gave to 12 yr.old gr.daughter) from purse to winter jacket to bookbag & back!",
"Yes. The official licensing is on the back. I get many complements on it. Mostly from 40+ men. It's awesome. Worth the buy."
] |
Will you please give measurement of base, my cup holder will fit a 2.5 inch base | [
"I'm sorry, I cannot answer your question. I gave it as a gift, so I never used it. Good luck.",
"The very bottom of the cup is exactly 2.5\", but then it bows out. I would say it would not fit in a 2.5\" base"
] |
Which size should I choose? My feet are 8.5 long, but my legs are kind of short... | [
"I would get a SM/MD. My shoe size is 8 and that is the size I went with and it worked for me. I am 5'5\" and the socks came up just below my knee.",
"Unfortunately, they do not come in length sizes and they will be a little bit long. You order by shoe size or calf measurement."
] |
Is the black barrel also steel, or is it plastic? | [
"The black part is plastic with two metal disc/blades in the bottom that revolve to get different size extractions.",
"The black barrel of the OXO Good Grips Potato Masher is a type of very sturdy plastic...same for the depressor."
] |
This bluetooth car code scanner will not pair with my phone, a Windows phone, using the 0000, 1234, or 6789. How do I get it to pair? | [
"I use the Kyocera Hydro Boost Mobile and sometimes it takes a couple times to get mine to pair, after a few attempts it finally pairs with 1234, i upgraded to the pro version much better"
] |
is compatible for lenovo think pad type 0301 | [
"If you go to crucial.com and type in the type of laptop you have. It will display the types of RAM best suited for your laptop."
] |
I want to know if this item contain metallic part (back) and crystal part (front)? | [
"No, it does not. It's one solid piece of clear plastic...personally I love it! It fit my iPad mini like a glove.",
"Is just plastic but looks like glass very nice I got this and a screen cover and has worked great. No metal parts. There is no front. It protects the back and sides just screen is left open. Screen cover does the job."
] |
Are they stainless-steel beaters and whisk? How much weight on the Mixer? Is it noisy when the motor is on? Thanks in advance! | [
"Yes, the beaters and whisk are both stainless steel and very well made. Weight is slightly more than an average hand mixer. Mixer is no louder than any other mixer dependent upon the setting.",
"Yes they are stainless-steel beaters and whisk. I would say it weighs about 1 1/2 to 2 lbs. and no it is not noisy just very powerful.",
"I'm 63 yrs old, very active - just moved again, after 21 mo.- & my son & I move all our belongings, as usual. This mixer is heavy for me. First thing I noticed. My 25-30 yr old Robeson was light. It had 175 watts & mixed 2 cream cheeses better than this one. I'm returning mine to the store.",
"Yes they are stainless-steel. The information on the website says the product is 1lb, and the box is 5 lbs. I'd agree with the others who have responded and say it weighs no more than a pound or two at the most. I know there was one reviewer who said they were 26 y/o and found it too heavy, but they probably used horrible body mechanics or something. I think if they tried to make it lighter, they'd end up sacrificing quality. As for the noise, I'd say it is typical of a hand blender.",
"Yes they are stainless steel beaters & whisk. Not sure on exactly the weight on mixer but it's not that heavy. The motor is no louder than most other mixers I have ever used. Its a nicemixer and gets the job done. Been very happy with this purchase."
] |
We have the U640, not the 660 will it work? | [
"I'm not sure, but I think yes, as it is more of a generic cover than a specific one."
] |
I bought my Cali. King in 2013 and one controller just died. Any ideas on finding a replacement? | [
"If I was you, I would call Serta and ask them that question. I haven't had any problems so I never had to call them",
"You need to call Serta for the correct company that makes that fitted sheet. In my case for a queen size it was Perfect Fit Industries. But you may have a different one. (Think sub-contractor)"
] |
On Screen Display necessary to set up receiver? The OSD via component cable-only for this receiver is putting me off - the last thing I want is ANOTHER cable running to my TV. So, here's my question: do you NEED the OSD to set up the receiver? Or can you do the same functions just via the LED display on the front of the receiver itself? On Screen Display necessary to set up receiver? The OSD via component cable-only for this receiver is putting me off - the last thing I want is ANOTHER cable running to my TV. So, here's my... » Read More On Screen Display necessary to set up receiver? The OSD via component cable-only for this receiver is putting me off - the last thing I want is ANOTHER cable running to my TV. So, here's my question: do you NEED the OSD to set up the receiver? Or can you do the same functions just via the LED display on the front of the receiver itself? « Show Less | [
"I thought the same thing, but after setting up the OSD I'm glad I did. It is so much simpler to use the included mic to have the receiver automatically set up the receiver. So, no, you don't HAVE to use the OSD. But to use the mic the answer is YES, you must have the OSD set up.",
"Following along with the manual (to know what all the abbreviations are), you can run through the speaker setup just on the receiver's display"
] |
How close to your face does the mirror need to be to see well? Arms length or closer? Thanks. | [
"I am in my fifties, so I would say closer than arm length ..... It is really great for putting on makeup!!",
"I sit at a desk or table when using. I have 20/20 vision I can see the small peach fuzz on face at arms length with the 10x magnification side. I use it to tweeze unwanted hairs on face and to apply makeup. I hope this helps.",
"I think it's different for each person. For me I have to be pretty close. Just keep trying & you'll get the right distance for you."
] |
How long is the cord ? | [
"According to the product's official website is is 3 meters. I measured my own and it was close to 12 feet, but I'll admit it was not a super accurate measurement.",
"8 feet to 9 feet but I did not unplug it from computer. I used 1 foot x 1 foot floor tiles to measure it. I say more 9 feet but its definitely not 12 feet. plenty log enough for my setup."
] |
These cables vs. Component cables: Any ideas? | [
"I purchased 1.3a category 2 certified 28AWG 6 ft hdmi cables through monoprice that work equally well with the Steren gold-tipped video cables provided by my cable company. The cable guy told me they are equivalent, and I would agree with that after having compared them myself. However the cable guy did also tell me that optical audio cables would be needed to match the quality that hdmi cables would provide. I do not have a surround sound system so can't judge the difference on that. Ultimately I went with the hdmi cables because there is only one plug on each end and so simpler to disconnect and reconnect if need be. PS I also compared top of the line Monster Cable HDMI (over $100 each!) to the monoprice $5 cables and couldn't tell any difference. This is on a Sony 1080p xbr4 120hz tv with a Playstation 3 for Blu Ray/dvd player. I say if component cables work better for you, go with them."
] |
What exactly do you grow from the seeds? | [
"I have grown herbs and flowers in my AeroGarden. I agree with the other participant, leafy plants grow better. Leafy basil was a hit. I am going to grown grass (not marijuana) for our cats and maybe 2 pods with some bright flowers. Works very well, a pain clean.",
"we start just about everything in our areogarden, But we have found mostly Leafy vegetables work the greatest...",
"No seeds come with it. You provide your own seeds, hence the name. I grew my own selection of herbs, but you can do flowers or whatever you'd like.",
"I went out and purchased salad seeds from a local store and used the growing medium supplied in the kit called \"Grow Anything\" and am having tremendous success. So choose the salad you like and grow it. I have not tried tomatoes but might in the future.",
"I am currently growing 2 marijuana plants which are about ready to harvest! It is legal to grow in Colorado."
] |
I have a Nikon D3200 with a 18-300 lens. this case fit my camera? | [
"It fits Nikon D5200 with attached lens Nikon 28-300mm f/3.5-5.6G ED VR AF-S Nikkor Zoom Lens (http://www.amazon.com/gp/product/B003ZSHNEA/ref=oh_details_o03_s00_i00?ie=UTF8&psc=1) including filter and lens cap. So I guess you need to compare your lens length to figure out.",
"It fits Nikon D5200 with attached lens Nikon 28-300mm f/3.5-5.6G ED VR AF-S Nikkor Zoom Lens (http://www.amazon.com/gp/product/B003ZSHNEA/ref=oh_details_o03_s00_i00?ie=UTF8&ps;c=1) including filter and lens cap. So I guess you need to compare your lens length to figure out.",
"I have several camera cases for my various equipment and they are big and hard to travel with. By buying this lens and case, they fit snuggly and take up less space. If the 18-300 lens is not much longer than the 70-300 it should fit with no problem. The camera and lens is about .25 to .50 inch from the bottom of the case. There is also about an inch of spare room at the top once the camera is inserted.",
"I would think so. I also have a 55-300 lens and the length difference to a 18-105 is onlt 1.8 inches - not much",
"I am not familiar with your camera. My Sony is about the same size as a small DSLR.If the D3200 is small, then, yes.",
"A Nikon 5200 with a Nikon 18-300 lens, plus UV filter, plus polarizer, plus lens cap fits nicely with strap included."
] |
Will this webcam record my sons online gaming? He's wanting something that does along this line...trying to figure it out for his birthday. | [
"unless he has it pointing at the screen, no it wont. its a camera, it will take pictures or video of what it is pointing at.",
"Online gaming is normally recorded within the system itself using programs such as Fraps. There are other ways of doing it as well, though in all honesty I am not extremely familiar with it as I only use Fraps myself. What is he using, is he playing PC games or something on a console? The recording methods differ for each. http://www.wikihow.com/Record-Video-Games"
] |
are these rear or front pads? or both? | [
"These are the rear pads only... at least for my car (Audi Q7). And like the picture shows, I only got one of the sensors... even though my car uses two.",
"Rears with sensors. But you still need new clips and pins. Those are avail as a parts kit from Porsche."
] |
Can you connect this to another obit system to get more misting nozzles? | [
"I believe you can BUT it wouldn't be worth the time or trouble. Mine didn't even last one season before all nozzles were nonworking or only spitting a stream and that was with very light usage.",
"Yes you can. Very easily. I just went to the garage to double check. Just disconnect the capped tube at the end of the first line from the last nozzle, cut off the faucet connection to the new mister line and slide it onto where the end cap went. Viola! To remove the tube, just pull back a little plastic ring that clamps it on. Add that to your new line after you remove the faucet attachment thing. So basically, you're taking off the end cap that blocks the water from coming out the far end and sticking on the new mister line where that went. In order to do that you have to cut off the thing that attaches it to your faucet. They don't need a lot of pressure to work so don't worry about the nay-sayers. A half a turn of my faucet gives me plenty of mist so a few more lines won't make any difference.",
"I don't think so; I connected two of the 3/8 inch systems for use on my rabbit hutches, and those state that you can connect them. The 1/4\" does not. I gave the 1/4\" system to a friend, so don't have it to look at. Sorry. I did get some questions answered last year by going to the Orbit web site and reading some of their stuff.",
"I don't think you can extend it. I wish I could have because it didn't go around the whole umbrella we had over our table. But there are different ones you can get other than this that do connect. The longer it is the less pressure. These clog very quick in hard water areas so buy the softener filter to attach it to! Would be worth it, makes it last longer."
] |
What size cushion fits on the seat? | [
"We purchased a Greendale Home Fashions 46-Inch Indoor/Outdoor Swing/Bench Cushion. It fits just right for us. A little thick in the seat, but comfortable."
] |
hi,can i change the guitar's color,i would like to a pink and a black | [
"If you order from us, Socaldailydeals, we would always provide you options to change. Contact us via Amazon messages and we can further assist you."
] |
will this work on my 1994 740il e32 bmw | [
"Yes it will, great tool a must have if doing your own work or just to check for problems"
] |
what is the difference between the professional detailer and the 5 star detailer | [
"Honestly I don't know. The detailer trims and groom very well. I have had it for approx. two years.",
"The 8290 Detailer has the 1062-600 Adjustable T-Blade and the Pro Set Tool.The 8081 5-Star Detailer has the 2215 Extra Wide T-Blade (by an additional 1/4 inch) but without the Pro Set Tool. I have seen in blogs where it is also adjustable and the Pro Set Tool can be obtained free from Wahl.So it depends on your initial needs.",
"Only thing I know is when the chrome ones had metal inside where you screw in the blade,,,, that was awhile ago because now they both are made the same other than that nothing different",
"The only deifference between the two honestly is a \"Paint-job\", same blade, same motor, different finish!! They both perform outstanding!!! Because of these trimmers I changed all my main trimmers from Andis to Wahl..."
] |
Does this shaver require a special cleaner like the Braun? | [
"Deep clean is not necessary regularly, if cleaned under running water aftereach wet shave",
"No special cleaner required.I run mine under tap water for three months of use. Then I clean it with the included deep cleaner module and I'm good for another three months.",
"The jet clean system uses a special cleaner that is included. But you can clean the shaver with out using the jet clean system as well.",
"Norelco has a Jet Clean solution that comes with the razor . It is suppose to last up to one month. However, after a wet shave, you rinse the head with hot water and let air dry. The razor is very clean after each shave. I can seey bottle of solution lasting at least twice that long. The bottle is 10 oz.s.",
"Yes, the unit ships with a small amount.Replacement is not too high of a cost. I clean mine under running water with the heads open, then deep clean once each 5 or 6 weeks."
] |
How do I get sales tax taken off? I am ordering from a tax exempt institution. | [
"You need to contact Amazon directly, either via e-mail or phone (look for the contact pull down on your account.) Amazon represenatives don't typically respond to questions posted here. Good Luck!",
"I am a customer, so your message was sent to me in error. I suggest contacting Amazon's customer service."
] |
Does the jacket not come completely unzipped? | [
"unzipped? Unzipped?, no, the delivered good. The product is very good and the time to delivered were on time. Thanks"
] |
Can you holster the knife on a belt comfortably? | [
"Yes it can. It can also be secured further by looping something (550 cord) through the holes at the bottom and then tying around a leg. This will keep it more stable.",
"The sheath fits belts easily and the knife can be drawn and placed back easily. The snap loop to secure the knife on my knife is loose enough that I can snap it together easily with one hand. The leather handle is not smooth but more ragged, I smoothed mine out.",
"Sure. The sheath has two holes to thread a belt through. The holes at the bottom can be used to run paracord through for keeping close to the body. That keeps it from flopping around.",
"Yes you can. It's styled very similar to a military-type knife. Would make a good survival tool. Strong blade. I collect and use knives and found this one to be surprisingly well made and durable. Sheath is quality and well reinforced. Well made also."
] |
Can anybody provide measurements of the glass portion? The seemingly identical piece, (only non-tinted), is listed with smaller dimensions and I'm working with a very tight space! | [
"15 7/8\" deep and 14 3/8\" wide. This is on the tinted glass. Also, the one I have does not match the picture provided. I wish I could post a picture here for you to compare it to."
] |
Does this jacket pack well? Going to LA soon, and I want something I can carry in my purse and pull out when necessary. | [
"Yes it's very lightweight so you can fold to make it fit nicely in a purse, bit a big purse though.",
"Very light, could pack in a \"travel-purse\" friendly roll without any issues..",
"The Columbia Women's Splash a Little Jacket is thin, comfortable, and stylish. However, you will need a medium size purse (not very small) to fully accommodate it. Living in Houston, TX, wear this jacket almost constantly. If you decide to buy it, you should be happy.",
"Jacket packs very well; non-wrinkle, not heavy, great hood. a bit bulky for a purse, unless you have a big satchel and will roll the jacket."
] |
What age group is this appropriate for? | [
"I gave it to my 2 1/2 yr old grandson...he is scared of the roar, but loves the toy anyway...I'd say 3 1/2 and up...with an adult to show how all parts work. It is huge, and very sturdy. It will be around for him as he gets older. One extra thing about these Imaginex toys is they are good for small motor movement, and are like a puzzle.",
"I bought this toy for my grandson last Christmas and he was 3 1/2. he loved it"
] |
What type are the cables? Are they the black ribbon type or just sleeved colored wires? | [
"They are black ribbon type. The power supply is excellent and had mine since January 2014.",
"They are mostly black ribboned and some are sleeved like the motherboard cable.",
"First understand that the cables are all modular. The power supply has plugs on it to connect the wires into. The package comes with a nice fabric bag which keeps all the wires. When i purchased mine the wires were black braided sleeved, but when i look around the internet is seems that these days Seasonic has gone to black ribbon style wires."
] |
these spark plugs will fit in my Audi A3 1.8 T? | [
"Suggest you check other sites like Rock Auto with your year, make, model and engine info to compare if they will fit. Pay attention to the photos/pictures to determine if the thread depth (3/4\" or 1\") is the same."
] |
Does this item come in it's original box inside of a brown amazon box or does it just arrive in the standard brown amazon box with packing materials? | [
"It came wrapped up and in a brown amazon box. I ordered 3 though so that could be why. They are beautiful.",
"It comes in its original packaging inside of an amazon box. They can gift wrap it as well of you like. If you say it's a gift there won't be any details as to what it is on the package slip just in case someone else gets the package first."
] |
I have an old sharp adding machine el-16305 that I bough from a garage sale. Will this work with that model? Thanks. | [
"Wish I could help out, but I have no idea. I recently bought a casio and this ink to go with it. I wouldn't see that it wouldn't work with your sharp unless it is the wrong size for your machine. Check with sharp manufactures"
] |
What is the lifting capasity of this motor ? is it more than the atwood 75367? | [
"5500 lb Landing Gear replacement motor. Suitable for Lippert and Venture Landing gear systems. Thank you Carl' S RV"
] |
Why are some of these adapter "without glass" and this one is "with" glass? Is there a reason to buy one adapter over the other? Thanks! | [
"For minolta lenses on Nikon bodies it is necessery to have a glass lens on the adapter",
"The adaptor I own enables me to use my Minolta, manual-focus, Rokkor lenses on a Nikon camera; and, with telephoto lenses, it works very well. The main difference between an SLR and a compact camera, is that the SLR's use a mirror, at 45-degrees, between the lens and the film, to enable the viewer to see an actual optical-image of what the film will 'see.' Some adaptors, without-glass, will enable Rokkor lenses to be used on cameras that do not have this 45-degree mirror, because these cameras are much slimmer. The Sony Nex series are an example.",
"These adaptors are designed to allow lenses produced by one manufacturer to be used with the cameras made by another manufacturer. They overcome the physical incompatibility of the means of mechanical attachment. However, different manufacturers's lenses differ, in addition to their means of physical attachment, also in the distance from the light-sensitive-film that each manufacturer intends his lenses to be mounted. Some distances ('lens register') are longer, some shorter. When a lens requiring a long 'register' is mounted on a camera requiring a longer one, then all that is required is an adaptor of the correct thickness. When a lens requiring a short 'register' is to be used with a camera requiring a longer one; then, in this case, it is the camera itself that is too 'thick;' the lens cannot then be mounted sufficiently closely to the film, and for an adaptor to work it, will need an additional lens to persuade the transmitted-light to be sharply-focused some distance further away than would normally be the case."
] |
Are there some types of DVDs that are incompatible with this product? I'm getting an error message saying my brand new blank DVD is unsupported. | [
"Hi Christopher, this Sony DVDirect express only supports DVD+R and DVD-R. DVD+RW and DVD-RW discs are not supported. Double/dual layer discs and 8cm discs are also not supported. Hope this helps. -Ely",
"I don't remember. I lost the manual some time back at a party. I have been using Windata DVD-R brand for years at Micro Center. It's both affordable and has over a 90 % success rate every time. Before that I have been using Verbatim."
] |
Conclusive Anwser needed - Does it have a memory? Will it stay in the same mode after I turn it off? | [
"If you press the button softly, it stays in the same mode, if you press it hard the mode advances.",
"Yes. But it's sensitive to your pushing the button so if it's done carelessly it will move it away from where it was last.",
"Hell if I know. It worked for about 30 seconds and never worked again. Yes the batteries were good."
] |
Better earphones? I don't know about anyone else but the earphones that came with this hurt. I'm wondering if anyone can recommend some that are more comfortable? Maybe smaller? | [
"The question above is the critical one - you can alwys spend more and get better. BUT let me add this: for an immediate, and mind-blowing upgrade at less than 15 bucks, go out and get yourself a pair of Koss KSC75s. They are light on the ears, small, and easy to transport. However, they sound incredible not only \"at this price range\" but in their own right. Get that purchase over with and then you can think about whether you want to spend more or not. But trust me on this, for most folks the Koss's are fantastic. You won't be disappointed. No I don't work for Koss, but I'd be willing to.Koss KSC75 Portable Stereophone Headphones The question above is the critical one - you can alwys spend more and get better. BUT let me add this: for an immediate, and mind-blowing upgrade at less than 15 bucks, go out and get yourself a pair of Koss KSC75s. They are light on the ears, small, and easy to transport. However, they sound incredible not only \"at this price range\" but in their own right. Get that purchase over with and then you can think about whether you want to spend more or not. But trust me on this, for most folks the Koss's are fantastic. You won't be disappointed. No I don't work... » Read More The question above is the critical one - you can alwys spend more and get better. BUT let me add this: for an immediate, and mind-blowing upgrade at less than 15 bucks, go out and get yourself a pair of Koss KSC75s. They are light on the ears, small, and easy to transport. However, they sound incredible not only \"at this price range\" but in their own right. Get that purchase over with and then you can think about whether you want to spend more or not. But trust me on this, for most folks the Koss's are fantastic. You won't be disappointed. No I don't work for Koss, but I'd be willing to.Koss KSC75 Portable Stereophone Headphones « Show Less",
"I second that I am a loyal Skullcandy customer and these are the best headphones I've found yet, and there cheap too.",
"I was able to purchase skull candy earphones for $12 at Marshalls. Check the store out they sell good quality earphones at cheap prices.",
"I love my Klipsh S4 earbuds. Far superior comfort and sound compared to ipod stock earphones. Cost about $80, but you wont believe the difference in sound. Especially bass.",
"I have little ears so the ipod earbuds never fit in my ears. To add to this, my ear canals are different sizes. I have had good luck with the Skullcandy brand (approx $22). They come with 3 different ear pieces so you can customize your fit. They are also pretty noise-canceling, but not to the point where you can't hear what's going on around you (if you are biking or running). Also, some versions come with a volume control on the cord, so you don't have to fiddle around with the dial."
] |
Which model of Brother sewing machine can be used with this feet? Kind regards | [
"As long as your BROTHER sewing machine accepts snap on feet, you are good to go."
] |
Has anybody used these blades in a wooded lawn type of environment? How robust are they? | [
"I have hills, trees, and lots of twigs/sticks on four acres. Blades do get nicks but filed out to new edge.",
"They are more heavy than stock blades...almost 1/16\" thicker. I cut 5 acres with some maples and oaks four times know and they are still doing well. Hope that helps",
"They are more heavy than stock blades...almost 1/16\" thicker.I cut 5 acres with some maples and oaks four times know and they are still doing well.Hope that helps",
"We live in South Central Missouri with a lot of trees in our yard. After a storm, there are too many branches to pick up so we just mow and mulch most of them and these blades hold up very well."
] |
I need to use something like this with an Iphone "4", not 4s or any other version. Will it work for me? | [
"I agree with the answer from Francis. Also, I don't use my tag anymore because it goes off periodically when not used. Jennifer MO",
"I don't think it will work with any other product, its an option feature made for Panasonic kx-tg7871 land line phone."
] |
I have a H Sytle track will this work with my track? | [
"It will work, but be sure you install it per the track manufacturer's instructions; there's only one correct way to orient it before you lock it in."
] |
I'm looking to buy a small amp to power two 8-ohm speakers. Will this be powerful enough to give decent volume or will it be too quiet? | [
"Depends on what u use it for@ 4 watts a channel with 4 ohm speakers it will do nicely,some claim its 100 watts a channel no way....I recommend reading the reviews on it,i bought 1 but gave it to my dad,i use the lepai 2020A plus,its a little more but sounds great,i use them for my pc with AR satilite speakers and a 70 watt powered infinity amp that was added to a 10 inch speaker and it thumps like a log. z-2300 setup...."
] |
Will this rack wobble a lot with a 2 inch hitch? Can it be locked to the hitch? | [
"Not even a little - I use it that way and it is rock solid. Yes it can be locked to the hitch quite easily as well - its right in the handle where you tighten it down - you just lock it up and your good to go. Best Rack I ve ever owned - cant go wrong on this one.",
"You would need a 2 inch receiver adapter. I have a 1 1/4\" receiver for this model and it is solid.",
"In my experience, the rack wobbles very little. A well-designed knob tightens the shaft of the rack against the inside of the receiver. Then, a safety pin inserts into a hole through the receiver and into one side of the rack shaft. The locking mechanism is pretty clever. After the rack is installed and the knob tightened to your satisfaction, a key is used to disengage the tightening knob such that it rotates freely. That way, while the system is quite easy to install and to remove, it is not easy to steal because the knob simply rotates freely until the key is used to re-engage it with the tightening mechanism. Very simple design, very effective. My only concern with the design had been that the shaft doesn't sit very deep into the receiver at all. I was really worried that it almost seemed as it if couldn't possibly hold. Nonetheless, in use, it has worked very well and it never loosens or slips, even after long trips. I'm thoroughly satisfied. It's are superior to the previous system that I had been using.",
"No, it will not. It\"wedges\" itself into the 2\" receiver when you turn the adjusting knob, and then fis snugly."
] |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.