Search is not available for this dataset
query
stringlengths 1
13.4k
| pos
stringlengths 1
61k
| neg
stringlengths 1
63.9k
| query_lang
stringclasses 147
values | __index_level_0__
int64 0
3.11M
|
|---|---|---|---|---|
I dont have access to a lathe. | 1. pay a workshop to do it for you\n2. put up an offer for a ready-drilled ball in eBay | Look online for your family name and see if you have one. Most coat of arms can also be found in the encyclopedia at the library. | eng_Latn | 25,200 |
This corkscrew is poorly made, consisting of low-grade stampings and flimsy plastic molded parts assembled with tinned rivets. It feels like it's going to come apart in your hand, and it requires considerable care to use it safely and effectively. It's outrageously overpriced, too. An unfortunate product offering from the company that brought us the legendary original Screwpull, perhaps the handiest corkscrew ever.I did manage to pull a cork with it, though - which is why it gets even two stars.
| It's awful. I bought it because I wanted a red corkscrew. However, the description does not state how cheaply it is made. Each time I use it I'm afraid it's going to break when I turn it. It's plastic. DO NOT BUY!
| This corkscrew is poorly made, consisting of low-grade stampings and flimsy plastic molded parts assembled with tinned rivets. It feels like it's going to come apart in your hand, and it requires considerable care to use it safely and effectively. It's outrageously overpriced, too. An unfortunate product offering from the company that brought us the legendary original Screwpull, perhaps the handiest corkscrew ever.I did manage to pull a cork with it, though - which is why it gets even two stars.
| eng_Latn | 25,201 |
Do not waste your money on this set! After an hour I had worn the smallest drill bit in the set down to a nub trying to drill through a small transmission bolt on my Pontiac Sunfire. I did get the screw extracted, however, the set was worthless by the time I got the screw out. Also, the extractors are weak. One will need a small torch to heat up the metal to loosen screws and bolts to keep from snapping the extractors.
| First time I tried the extractor, it busted off inside the bolt. Very hard metal, but so hard that it is quite brittle. Very little amount of free play, and doesn't let you put any torque on the bolt at all, so if it is rusted in there, forget about this set! Seems like a cheap knock off of the ever so popular "easy out" set.Now I have to figure a way out how to get the stupid thing out of my bolt so I can drill a new hole and tap some new threads in. Can't drill it out because the metal is so hard, it is chewing up my drill bits.
| Do not waste your money on this set! After an hour I had worn the smallest drill bit in the set down to a nub trying to drill through a small transmission bolt on my Pontiac Sunfire. I did get the screw extracted, however, the set was worthless by the time I got the screw out. Also, the extractors are weak. One will need a small torch to heat up the metal to loosen screws and bolts to keep from snapping the extractors.
| eng_Latn | 25,202 |
I was looking for a simple set of fireplace tools and this is just what I needed and fairly priced.
| I purchased these fireplace tools with great anticipation of beautiful, warming fires. The tools are cheaply made and if you don't put them into the holder the right way they get stuck and it's difficult to remove the handle. Do not recommend.
| I purchased these fireplace tools with great anticipation of beautiful, warming fires. The tools are cheaply made and if you don't put them into the holder the right way they get stuck and it's difficult to remove the handle. Do not recommend.
| eng_Latn | 25,203 |
I purchased these fireplace tools with great anticipation of beautiful, warming fires. The tools are cheaply made and if you don't put them into the holder the right way they get stuck and it's difficult to remove the handle. Do not recommend.
| This is by far the cheapest made fireplace tool set we've ever owned. It is flimsy and a 3 year old could hold it easily - by that I mean, it is so lightweight that it is actually difficult to use because it doesn't have enough backbone to do the job. If I hadn't already tossed the box, it would be returned. As it is, winter is almost over and as soon as we do the last fire, this item will be in the recycle bin. Very disappointed.
| I purchased these fireplace tools with great anticipation of beautiful, warming fires. The tools are cheaply made and if you don't put them into the holder the right way they get stuck and it's difficult to remove the handle. Do not recommend.
| eng_Latn | 25,204 |
This is by far the cheapest made fireplace tool set we've ever owned. It is flimsy and a 3 year old could hold it easily - by that I mean, it is so lightweight that it is actually difficult to use because it doesn't have enough backbone to do the job. If I hadn't already tossed the box, it would be returned. As it is, winter is almost over and as soon as we do the last fire, this item will be in the recycle bin. Very disappointed.
| I purchased these fireplace tools with great anticipation of beautiful, warming fires. The tools are cheaply made and if you don't put them into the holder the right way they get stuck and it's difficult to remove the handle. Do not recommend.
| This is by far the cheapest made fireplace tool set we've ever owned. It is flimsy and a 3 year old could hold it easily - by that I mean, it is so lightweight that it is actually difficult to use because it doesn't have enough backbone to do the job. If I hadn't already tossed the box, it would be returned. As it is, winter is almost over and as soon as we do the last fire, this item will be in the recycle bin. Very disappointed.
| eng_Latn | 25,205 |
I purchases this set for simple craft projects...mainly to cut card stock and cardboard. I tried hammering the punches with my 12 oz. hammer and it didn't go through the card stock. Got my husbands big beefy hammer...it still will not punch through thin card stock. I am very disappointed in this product. Glad I didn't pay a lot...complete waste of $
| This is by far the cheapest made fireplace tool set we've ever owned. It is flimsy and a 3 year old could hold it easily - by that I mean, it is so lightweight that it is actually difficult to use because it doesn't have enough backbone to do the job. If I hadn't already tossed the box, it would be returned. As it is, winter is almost over and as soon as we do the last fire, this item will be in the recycle bin. Very disappointed.
| I purchases this set for simple craft projects...mainly to cut card stock and cardboard. I tried hammering the punches with my 12 oz. hammer and it didn't go through the card stock. Got my husbands big beefy hammer...it still will not punch through thin card stock. I am very disappointed in this product. Glad I didn't pay a lot...complete waste of $
| eng_Latn | 25,206 |
What type of rivets do I use to bind 3 3/16 inches thick pieces of steel flat bar? | What rivets should I use to bind 3 3/16 inch thick pieces of steel flat bar? | What is a good glue for metal? | eng_Latn | 25,207 |
Do not waste your money on this set! After an hour I had worn the smallest drill bit in the set down to a nub trying to drill through a small transmission bolt on my Pontiac Sunfire. I did get the screw extracted, however, the set was worthless by the time I got the screw out. Also, the extractors are weak. One will need a small torch to heat up the metal to loosen screws and bolts to keep from snapping the extractors. | First time I tried the extractor, it busted off inside the bolt. Very hard metal, but so hard that it is quite brittle. Very little amount of free play, and doesn't let you put any torque on the bolt at all, so if it is rusted in there, forget about this set! Seems like a cheap knock off of the ever so popular "easy out" set.Now I have to figure a way out how to get the stupid thing out of my bolt so I can drill a new hole and tap some new threads in. Can't drill it out because the metal is so hard, it is chewing up my drill bits. | I use these at my automotive school, notorious for un-calibrated torque wrenches and people who don't like reading directions. I would go with professional grade set if your working on rusted bolts, or in awkward or tight situations. Otherwise, for light to medium duty work: Buy 2 of these sets to save on shipping. You will need the extra set. The slightest vibration can snap the bits, they are very brittle. Consider your first set a 'learning set'. If you use them to remove another bit that has broken off in a broken screw, they grind into dust (Doh!). These work great on bolts which have been over torqued or snapped on re-install. | eng_Latn | 25,208 |
how to bend small rod | Instructions. Clamp the stainless steel rod into the vise with the area you need to bend resting against the side of the vise. Put on your safety glasses and leather gloves.Light the oxy-acetylene torch with the striker and set the torch to a neutral flame that does not emit any soot and has a constant blue glow.oosen the vise to release the bent stainless steel rod and place the bend into the bucket of cold water to cool off the steel. Clean the area of the bend with the 400-grit sandpaper to remove any oxidation from the surface of the rod. | 1 To start the sheet bend knot, hold the thicker rope in one hand, and make a loop at the end with a long tail. 2 Pass the thinner rope through the loop. Wrap the thinner rope around the thick rope and tail of the loop. | eng_Latn | 25,209 |
how to determine diameter of ring | an O-ring, a good fit is critical. O-rings are measured in millimetres. Place the O-ring on a clean, flat, level surface. Determine the inside diameter. Use a ruler to measure from one inner edge to another. To measure the outside diameter, use a ruler to measure from one outer corner of the O-ring to the other outer corner. Measure cross section. Place the O-ring into a vernier calliper. Lightly clamp the jaws of the calliper onto the O-ring, but do not compress it. Record the thickness of the ring (the cross section). If you only have 2 of the O-ring diameters then you can determine the third diameter with the following equations: Measurements: Outside Diameter (OD) = Inside Diameter + (2 x Cross Section). Inside Diameter (ID) = OD - (2 x CS). Cross Section (CS) = OD - ID, ÷ 2. If the o-ring is cut, measure the cross section (thickness) of the O-ring and the length. Converting Length to Inside Diameter: Length ÷ 3.142 = circumference. Circumference - CS = ID. | First lets talk about choosing the right rings and the correct size. Make sure you select a drapery ring that will fit over the size curtain rod you have. For instance, if your drapery rod is a 1 inch rod, the diameter of the rings should be 1 1/2 inch rings or something larger than 1 inch in diameter. | eng_Latn | 25,210 |
who makes metabo tools | Metabo headquarters in Nürtingen. Metabowerke GmbH with its headquarters in Nürtingen, Germany is a manufacturer of high quality power tools for professional users. The company was founded in the 1920s and got its name from a hand drill, the so-called Metallbohrdreher. Today, Metabo offers a wide range of power tools. | 1 Eklind Tool Co. (Franklin Park, IL): hex tools, including folding, L-keys, and T-keys, all made in USA. Electrical Safety Products (Woburn, MA): 1000v dielectric double-insulated electrical tools and safety equipment. | eng_Latn | 25,211 |
what tool for gxp bottom bracket | GXP Bottom Bracket Tool. My Truvativ gxp bottom bracket is totally shot, so its time to replace it. Looking to do it myself this time, so need the correct tool. Would someone be so kind as to point it out to me on crc, wiggle etc.. as I have been searching through and can't seem to work out which one it is. Cheers. | The most common bottom bracket issue is the bearing cups or bearing adaptors being poorly tightened into the frame. This results in a creaking noise. The solution is to remove the cranks and then tighten the bearing adaptor fully into the frame. | eng_Latn | 25,212 |
what is oes parts | It is believed by many that OES (Original Equipment Supplier) parts have to be purchased directly from the dealer. OES parts are made on the same assembly line as the OEM(Original Equipment Manufacturer) except it goes through a couple added steps. | Typical O-ring and application. An O-ring, also known as a packing, or a toric joint, is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a round cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface. The O-ring may be used in static applications or in dynamic applications where there is relative motion between the parts and the O-ring. Dynamic examples include rotating pump shafts and hydraulic cylinder pistons. O- | eng_Latn | 25,213 |
is 10 gauge screw bigger than 8 | A #10 screw is bigger than a #8 screw and both of them are smaller than a quarter inch.0 is bigger.... the second number is threads per inch... so 10/32 or 10/24, 24 is a coarse thread and the 32 is a fine thread.... the last number is the length of the screw... 10/32 - 1 1/2 is a #10 screw with 32 threads per inch and is an inch and a half long. Mr. E · 5 years ago. Thumbs up. 5. | Deduct from that measurement 1/16, and then count the number of 1/32 remaining. So a screw head with a diameter of 1/4 was a 6 gauge, 5/16 was an 8 gauge, 3/8 was a 10 gauge and so on. Answers 7. active oldest votes. up vote 46 down vote accepted. 6 is a #6-size screw. Screw gauges are a measure of the head size and shaft size, and are roughly linear but not quite a 1:1 relationship (a #8 screw is a little less than twice the diameter of a #4 screw). | eng_Latn | 25,214 |
is loctite needed for balisongs | This is completely normal and is seen on $300+ Benchmade custom balisongs (tang pins deform or pivot screws back out). On a balisong with screw construction, LocTite is used to hold the pins in place. On FHMs, I use industrial strength epoxy. | including yours. Loctite® Super Glue is a fast bonding, super strength, instant adhesive with specially engineered formulas and applicators to bond virtually any material.Loctite Super Glue is ideal for small bonds that are subject to daily use and occasional harsh conditions.ncluding yours. Loctite® Super Glue is a fast bonding, super strength, instant adhesive with specially engineered formulas and applicators to bond virtually any material. Loctite Super Glue is ideal for small bonds that are subject to daily use and occasional harsh conditions. | eng_Latn | 25,215 |
definition joist | In architecture and engineering, a joist is one of the horizontal supporting members that run between foundations, walls, or beams to support a ceiling or floor. Typically, a joist has the cross section of a plank. Joists are often supported by beams laid out in repetitive patterns. | Line up the rim joist at the edge or the room and butt it up against the sill plate. Measure the width of the rim joist and purchase a joist hanger that is a similar width. For a 2-by-10 rim joist, use a 2-by-10 joist hanger. Set the joist hanger up in the rim joist.Press it up against the sill plate so the rim joist is setting in the joist hanger and the pre-drilled holes are up against the sill plate. Drill the 1 1/2-inch wood screws through the joist hanger and into the sill plate.Insert a screw into each pre-drilled hole on both sides of the rim joist.et the joist hanger up in the rim joist. Press it up against the sill plate so the rim joist is setting in the joist hanger and the pre-drilled holes are up against the sill plate. Drill the 1 1/2-inch wood screws through the joist hanger and into the sill plate. | eng_Latn | 25,216 |
crescent wrench definition | ⢠CRESCENT WRENCH (noun) The noun CRESCENT WRENCH has 1 sense: 1. an adjustable wrench designed to fit hexagonal nuts with the adjusting screw built into the head of the wrench. Familiarity information: CRESCENT WRENCH used as a noun is very rare. | lug wrench - a wrench with jaws that have projecting lugs to engage the object that is to be rotated. open-end wrench, tappet wrench - a wrench having parallel jaws at fixed separation (often on both ends of the handle) pin wrench - a wrench that has a projecting pin that fits into a socket on the object to be turned. | eng_Latn | 25,217 |
what is the secur fit max hip stem made of | Stem Components. Press-Fit Stems: The press fit stems are available in three styles: straight flutes, bowed and long bowed. The press fit stems have an 11mm replacement length. The stems are made of titanium alloy with titanium plasma spray. The proximal 3cm of the stem is coated with Hydroxyapatite. Cemented Stems: | This is typically known as cope and stick joinery or 5-piece construction. MDF, because itâs made of processed wood fibers as panel stock allows for a different construction method. MDF can be milled by computer-operated machinery (CNC) in one-piece frames with the center cut out for a recessed panel. | eng_Latn | 25,218 |
pitch diameter bolt definition | 10 most extreme places on Earth. Pitch diameter is a term used to take measurements of the diameter of a gear or a screw using pitch points. Pitch points on a gear could be found if a straight line were drawn up from two of the gear's teeth located side by side and the two lines were connected by a curve. | In a screw, the pitch diameter, or thread pitch diameter, is found by measuring the tread's major and minor diameter. The pitch of a gear basically measures the distance between the teeth.View slideshow of images above.itch diameter measurement is used to help people find the right screws for a certain job. Pitch diameter is particularly useful if you are in need of replacement screws. Putting the wrong ones in could cause problems, so it's important to match them up with the old ones. | eng_Latn | 25,219 |
what is an o-ring | An O-ring, also known as a packing, or a toric joint, is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a round cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface. | of relative motion. In situations involving little or no. motion relative to the seal, the O-ring application is. STATIC. In situations involving reciprocating, rotating, or oscillating motion relative to the seal, the O-ring. application is DYNAMIC. | eng_Latn | 25,220 |
can i use roofing nails for hurricane ties | Hello, For just Florida Hurricane only discussion: what screw is equivalent to whatever nail (#8 - 1.5 nail) is used in the Hurricane Mitigation roof truss to wall single clip (just the 90 deg simple clip). ; I would think it would be just the same #8 - 1.5: screw. Thanks. | Framing your deck will allow you to build a solid base for your deck. Assembling the frame on the beams is the next step when installing your deck.For this project you will need joists, a tape measure, pencil, a square, drill with bits, nails and screws, a hammer, joist hangers, corner brackets, hurricane ties and a saw.ssembling the frame on the beams is the next step when installing your deck. For this project you will need joists, a tape measure, pencil, a square, drill with bits, nails and screws, a hammer, joist hangers, corner brackets, hurricane ties and a saw. | eng_Latn | 25,221 |
what does forged fasteners mean | Definition. Manufacturing process in which a piece of (usually hot) metal is formed into the desired shape by hammering, pressing, rolling, squeezing, and other such operations in one or more forging equipment.anufacturing process in which a piece of (usually hot) metal is formed into the desired shape by hammering, pressing, rolling, squeezing, and other such operations in one or more forging equipment. | The two halves of a riveted leather snap fastener. The male half (top) has a groove which snaps in place when pressed into the female half (bottom). A snap fastener (also called press stud, popper, snap or tich) is a pair of interlocking discs, made out of a metal or plastic, commonly used in place of buttons to fasten clothing and for similar purposes. | eng_Latn | 25,222 |
how to repair old plaster cornice | What you will need for the jobHow to repair an old plaster ceiling Safety First-Organise an Electrician Have an electrician isolate electric light fittings. Prop up and re-nail or screw fasten any badlysagging parts of the ceiling (screw fasteningcreates less vibration). Fixing battens 1 Attach metal battens at right angles to existing ceiling joists. 2 Fix battens to each joist with flathead nails orappropriately sized nails to suit batten type andceiling construction. | 7. Cornice adhesive can now be applied to the top and bottom edges of the cornice with a 10mm bleed of adhesive along the full length. 8. Place the cornice on top of the nails and forcefully press the top to the ceiling so as to maintain pressure along the edge.9.See that the next length is placed up to the first and carefully push into place using the adhesive with care to form the joint. 10.lace the cornice on top of the nails and forcefully press the top to the ceiling so as to maintain pressure along the edge. 9. See that the next length is placed up to the first and carefully push into place using the adhesive with care to form the joint. 10. | eng_Latn | 25,223 |
what is unf unc threads | Answer Wiki. UNF and UNC are the two main categories of the Unified Thread Standard used in the United States. For a given nominal outside diameter of a screw, there are Fine and Coarse thread densities (thread pitches), measured in Threads Per Inch (TPI). | Stud bolts can be precision machined to have different types of threads, including UNC, UNF, 5HF, NPT, and Metric 6g. Our custom milling, turning, thread rolling, and threading capabilities enable us to manufacture fully threaded studs or studs threaded only at the ends. | eng_Latn | 25,224 |
is the tie rod ends apart of a wheel alignment | They connect the center link to the steering knuckle on cars with ordinary suspension systems and recirculating ball steering gears. Together with the ball joints, tie rod ends make sure the car steers left and right at the same time it is hitting bumps and potholes that might cause the wheel to travel up and down. The sleeve joins the inner and outer tie rod ends together and allows for adjustment when the front wheels are aligned. | A belt may be used to ensure the wheel isnât moved during the repair. The front tires will be removed, and the universal joint coupler will be removed from the pinion shaft. The power steering lines will be disconnected from the rack, and the tie rod ends will be separated. | eng_Latn | 25,225 |
what is the purpose of spherical washers? | They are used in the same applications as fender washers. A spherical washer is part of a self-aligning nut; it is a washer with one radiused surface, which is designed to be used in conjunction with a mating nut in order to correct for up to several degrees of misalignment between parts. | Washers are used for multiple purposes when mechanical parts are assembled using bolts and nuts. Here are some usages and as you can see it is not likely that a generalized answer can be devised to directly answer your question! Some washers have a special design that attempts to help keep the nut and/or bolt from coming loose. Known as a lock washer these may be a split ring type, star type, wavy or any one of a number of other designs. A lock washer will be used with the part of the assembly that most likely could turn such as the nut. It could be used under the bolt head in instances where the bolt screws into threads in one part of the assembly. A washer is sometimes used to protect the surface of the assembled parts. A nut or bolt head being turned during the tightening process can mar the part surface around the hole and a washer can be used to take the abuse as opposed to the part. | eng_Latn | 25,226 |
what tool counter sinks a bolt | Click to Enlarge. Reverse Countersinks and Spotfacers are used in those areas where the back side of a part has limited access and requires the hole to be countersunk or a flat cut for a bolt/nut/ washer. The pilot is inserted through the hole and the Reverse Countersink or Spotfacer is mounted on the pilot. | Coarse Thread. This plow bolt features a flat, round, countersunk head with a single reverse key. that prevents the head from turning. Also, when replacing bolts, the key insures that the bolt is. placed in its original position. No. 7 Bucket Tooth Plow Bolts are often used on heavy equipment. such as snow plows and road graders. | eng_Latn | 25,227 |
what tool is called dolly | 1 Dolly (tool), a portable anvil. 2 Dolly (trailer), for towing behind a vehicle. 3 Boat dolly or launching dolly, a device for launching small boats into the water. 4 Camera dolly, platform that enables a movie or video camera to move during shots. Hand truck, sometimes called a dolly. | Instructions. Remove any plastic trim from the metal that requires straightening. Any paint on the surface of the metal will crack and flake off when it is bent, but plastic trim may make straightening the metal more difficult. Place the dolly on the concave side of the dent or bend. You will be using the metalworking hammer on the convex side. | eng_Latn | 25,228 |
does this have a 7/8 inch opening | I am using mine on a pair of Drive forearm style crutches, and the lower shaft is 7/8 inch. It took a little to force the tips on, but they did go on, and I have been walking on the same pair of Tornado tips since last fall. Oct. 2012 I think. | That is correct minus it doesn't come with a ⅝" guard. It also comes with a blending guard that works very nice for fade haircuts. | eng_Latn | 25,229 |
Great item, made installing the APEX trigger and Enhancement ... | Great item, made installing the APEX trigger and Enhancement Kit very easy. Set the adjustments dials and it will hold the components perfectly. I also bought the tray <a data-hook="product-link-linked" class="a-link-normal" href="/APEX-Armorer-s-Tray-Gun-Stock-Accessories/dp/B00PL5CW4G/ref=cm_cr_arp_d_rvw_txt?ie=UTF8">APEX Armorer's Tray Gun Stock Accessories</a> in conjunction with this. Along with being a 'shade tree' gunsmith I am also a 'shade tree' woodworker and mechanic, so my work bench is not exactly perfect for gunsmithing, this and the tray allowed for a perfect work place and not worrying about losing pins. | No issues or complaints whatsoever. I can't imagine getting stamped steel springs wrong, but if anyone has, it wasn't Acco. | eng_Latn | 25,230 |
Exciting - but not durable | I searched the world for this toy last month so I could give it to my 5 yr old son for Christmas. It was listed as one of the top 10 toys for 2011, so I assumed it would be great. Well, it was easy to set up, really cool, and awesome fun for about 15 minutes. Then it started to fall apart. Literally.
My biggest complaint is the yellow fasteners for the wall. While the 3M strip holds to the wall perfectly fine, the yellow clip that is suppose to secure itself into the wall mount constantly falls out. When this happens, the entire track section detaches from the wall. Eventually, with one track derailed, the entire set up starts to detach from the wall. Pretty soon, everything is in a heep on the floor and my son is asking me to set it all back up. A few car races later and the track is on the floor in a pile again.
I've also found that the cross piece that is suppose to snap into the yellow fastener pops out every now and then. This, again, causes the entire system to separate from the wall and come crashing to the ground.
This toy has so much potential! I just wish it was put together a little bit better. I feel like my only option is to bust out the super glue and secure the fasteners to the wall mounts for good! | I bought this as a gift for a one year old first birthday. It completely fell apart the second time he used it. | eng_Latn | 25,231 |
One of the worst purchases I've ever made | Total piece of junk. If you need to put fasteners on cotton candy then this will work. If you need to put fasteners on real material don't get this one.
Also be aware this only fits these fasteners. If you buy this and then buy other heavy duty fasteners, not only will they not work with this crimp, but this crimp will break and bend under pressure. One of the worst purchases I've ever made. Not recommended. | Fit like skinny jeans......Grown men don't wear skinny jeans!!! I returned them and got full refund. | eng_Latn | 25,232 |
Received a damaged part | Received a damaged item. I ordered 11 levers. One of the lever locks looks to be used see photos. | This mat split in two before I even got it out of the packaging. Cheap, cheap, cheap. Proof that you get what you pay for. | eng_Latn | 25,233 |
I purchased several sets of these and most worked fine but one did not | I purchased several sets of these and most worked fine but one did not. The elastic snapped when I attempted to install. I had to return it. Other than that flaw, they work fine. | As others have noted in the comments, the inner sharpener part broke right off. In my case, it happened the first time I tried to use it. No extreme force was used...it just broke.
Find a different sharpener. | eng_Latn | 25,234 |
NO Quality control / not recommending this to anyone. | Two pieces fit so tight we ended up having to put heat to them and grinding off metal so they would move. Expanded one using threaded rod and putting nuts inside so as to widen the fit. On the welded on piece we needed to put threaded rod 3/4 inch threw holes and thightened nuts until sides went in enough so that thumb moved loose enough to operate without using a hammer. Have not yet used this but will this weekend. Took a welder and owner 5 hours to install. | El producto es de muy buena calidad! La entrega se realiz dentro del lapso de tiempo esperado. Lstima que me qued pequea... | eng_Latn | 25,235 |
Very nice product at a good price. | I was a bit surprised at the negative review. This product is a good item that does what it's intended to do, and it's clearly not sold as a high-end product. As with any rattan tipper, it's hard to keep all the individual rattan rods from rotating a bit with continued use, but there are many cheap and simple ways to fix the problem. When I buy a tipper like this, I just coat the non-playing end in epoxy or sealer (see photo). I typically use a product called "Shoe-Goo," which is meant for repairing shoes. It's a flexible adhesive that locks all the rods together quite well. I really like this tipper when I'm playing with a microphone, as it softens the tone and provides a more mellow beat. I think it's a quite good product at a very good price, and if you have any issues with the rods rotating, just cap the end with some epoxy. I did it as soon as I bought it to avoid any issues from the start. | Love the color assortment, ease of use and portability of this item! I would purchase additional items of this brand in the future! | eng_Latn | 25,236 |
It's really nice for the amount I mean not all of us ... | It's really nice for the amount I mean not all of us can afford a Critter Nation. I don't really like the floor cause the my rats can get bumble foot or get it caught in between so I put some fleece on it. The instructions were hard to follow. | Only thread chaser I could find in this thread size and you need them with an aluminum block for my head studs. | eng_Latn | 25,237 |
Wheels wobble, bolts hard to assemble | I agree with some of the reviewers that the engineer who designed this product probably did not try to assemble it together before it goes to production line. It is hard to use any tool to get the bolts on correctly. Also, the wheel wobble and make noise like some of the grocery store carts. I tried to make it better by tighten some of the bolts around wheels, but I made it worse. I am going to bring it to work tomorrow and see if our engineers can help me solve this problem. Otherwise, it's a good looking platform truck. It's a bit heavy for my standard though and I believe it probably won't stand for 660 lbs like some reviewers said by looking at the quality of it. I bought this to help move my daughter into college dorm, I hope it work. | Purchased to replace a melted socket on our '99 Miata - If I could give this zero stars, I would. Terrible quality. The contacts wiggle, and it's impossible to make the headlight go in because they won't align, even with half an hour spent on what should be a 2-minute max repair. It's so irritating it's not even worth the $3 & the time to ship it back. | eng_Latn | 25,238 |
Great price, but connectors won't fit | A TOSLink cable for cheap with prime shipping, that sounded promising.
Some people complained the connectors are too loose, I seem to have the reverse issue: the connectors won't fit, either on the Panasonic TV or in the expensive audio receiver.
I tried an old Sony TOSLink cable and it snaps in just fine (it's unfortunately too short for my setup), so it's not the TV or the receiver. By looking carefully, I see that this cable's connectors are just half a millimeter wider on one side than the Sony's.
And yes I removed the little rubber protections on both ends of the cable ;-)
Well let's see if the <a data-hook="product-link-linked" class="a-link-normal" href="/AmazonBasics-Toslink-Cable/dp/B001TH7GSW/ref=cm_cr_arp_d_rvw_txt?ie=UTF8">AmazonBasics Toslink Cable</a> connectors fit correctly. (Update: just received it; it fits perfectly. The connectors snap in place with no effort and are not loose.) | <div id="video-block-R32YISZ2XR2P93" class="a-section a-spacing-small a-spacing-top-mini video-block"></div><input type="hidden" name="" value="https://images-na.ssl-images-amazon.com/images/I/E1HziNDBrPS.mp4" class="video-url"><input type="hidden" name="" value="https://images-na.ssl-images-amazon.com/images/I/910aO02qklS.png" class="video-slate-img-url"> Higher quality video here: https://youtu.be/jgYHj3m7Y14
Pros:
Wide variety in kit, almost all you need.
High Quality
Durable
Affordable (around $14 at time of purchase)
Cons:
Would have preferred a 1.5 screw driver instead of 1.2
Anti Static tools are a little too big
Metal Slim tool could use a longer plastic sleeve. Easy to dig into your palm.
I was offered this product at a discounted rate in exchange for my honest opinion. | eng_Latn | 25,239 |
(I recommend using red thread locker and torquing the bolts to ... | If you own a Chevy Express, make this investment; especially if you live in deer country.
One man can mount this in less than 90 minutes start to finish - probably faster if you read the directions first & limit the Jim Beam Black and Coke to three... or was it five???
No drilling, no altering, no fabricating for my '09 AWD Express - truly bolt on fit.
(I recommend using red thread locker and torquing the bolts to at least 45ftlbs) | <div id="video-block-R1QIGV6S5LWJRM" class="a-section a-spacing-small a-spacing-top-mini video-block"></div><input type="hidden" name="" value="https://images-na.ssl-images-amazon.com/images/I/B1a2gxydZyS.mp4" class="video-url"><input type="hidden" name="" value="https://images-na.ssl-images-amazon.com/images/I/81UYOPW2d%2BS.png" class="video-slate-img-url">I own dozens of these in my shop and they are simply the best. They are built extremely well. We use them every single day and they get dropped and banged around yet still work well. The heads need adjusting sometimes via the Allen screws but they work great. After a year of constant abuse sometimes the trigger igniter begins to fail but you can still fire it up with a striker. The adjustable knob and higher output is a nice step up from the TS4000 models. I would recommend to anyone whether they are a professional or hobbyist. | eng_Latn | 25,240 |
Worst piece of kaka I have bought in many many ... | Bought to grate fresh parmesan daily, but the grater falls off the rotary handle in less than one revolution, regardless of speed or pressure. Worst piece of kaka I have bought in many many years! | Ok rings. You get what you pay for on these ones. Dicolored after a few days of wearing them. I also found them all large. I have to wear them as regular rings. Not above the knuckle | eng_Latn | 25,241 |
Good, but quality issues | This is a common product with not much apparent differentiation. This product comes as "tightened at the factory." I needed it in the flip position vs. the drop, so I had to remove it. In trying to loosen the nut, the lock washer was so bad it distorted to an oblong without a lot of effort. I had to replace the lock washer. It makes one wonder how good the rest of the medal really is and will it fail, which could be fatal. I have experience these nuts coming loose during normal operation, which is why they recommend checking it frequently. Fortunately, i had removed the slider and noticed the loose nut before it came off completely. | Garbage. Didn't even last 6 months. Will not be buying from this brand again! | eng_Latn | 25,242 |
Racks fell apart quickly | I wrote the review below before I actually used these BUT I have used them about 5 times in the 2 months I have had them and the bar that has the rounded spots for legs has come apart at the solder point on both racks. This could be a dangerous thing if you were putting a hot liquid on them. For me it was a pan of brownies and the rack collapsed and it slid down. Beware!
There the review below is no longer valid!
(Wow, I am impressed, these are a heavy duty metal and I am thrilled. My old ones (I mean old, old) are a thin metal and bent too easily. There are fantastic so this was a great purchase!) | Switches work great for what they are, but there's some quality control issues. My problem is that one of the tabs on one of the switches was never tapped and wouldn't hold a screw. The other 4 switches are all solid. | eng_Latn | 25,243 |
The head was loose the moment I received it | The head on the hammer was loose the moment I received it and it would rattle around enough that you could easily feel it with your hand. This hammer should have never left the factory. Since there is no indication where it's manufactured, I'd say it's probably Made in China and it isn't worth the nine dollars I paid for it.
I have returned it to Amazon promptly.
A much better four ounce ball pein hammer is made by JH Williams and is available at Amazon.
Here is a link:
<a data-hook="product-link-linked" class="a-link-normal" href="/JH-Williams-HBP-5-0-4-Ounce-Ball-Pein-Hammer/dp/B005VN202M/ref=cm_cr_arp_d_rvw_txt?ie=UTF8">JH Williams HBP-5-0 4 Ounce Ball Pein Hammer</a> | Good price. Extremely slow shipping. Decent product. It works better if you don't tighten down the top screw too hard. | eng_Latn | 25,244 |
Nothing spectacular but works for what I purchased it for | The plate showing positions 1, 0, and 2 is loose, nothing that a little super glue won't fix.
The switch has 12 contacts and 3 positions:
When in position "1"
contact 9 is connected to contact 10
contact 11 is connected to contact 12
All other contacts are not connected to anything
When in position "0"
contact 5 is connected to contact 6
contact 7 is connected to contact 8
All other contacts are not connected to anything
When in position "2"
contact 1 is connected to contact 2
contact 3 is connected to contact 4
All other contacts are not connected to anything | Charges things fast. Can't say more, cause does the job right. So I just use it and take it for granted. | eng_Latn | 25,245 |
Very nice but gold bar has imperfections | Nice set but the gold tie bar has two imperfections right on the front of the bar which makes it unwearable for me. It seems to be a blemish where the color isn't quite the same. I love the set, the size and the box but i think i'll be returning it because i can't wear the gold one. I will however be reordering the same set hoping for a set without any imperfections. | Mounted on my 12 ga Remington with the Truglo Red-Dot sight. Bar bent after shooting my 3" - #5 Turkey loads a few times. Returned and got a prompt refund. | eng_Latn | 25,246 |
Nice value at this price point | They work first time and great there after. Need to use a heavy hammer as the brass is hard. An improvement would be providing more grommets in the kit. Good instructions.
Great item for someone who needs to insert a grommet infrequently. | Arrived late, but that was my fault and hurricane Irma. I'm happy with the purchase. | eng_Latn | 25,247 |
Nice looking frame made of actual metal | This is a nice looking frame made out of actual metal. It looks pretty great, and hopefully it holds up. The warning about salt and needing to spray it down concerns me a little during the winter months as we have snow and salt on the roads where I live.
So the frame does what it is supposed to, and looks good. There are a couple of down sides I think could be addressed. The main one is that there are no real instructions or diagrams with how to use it included in the packaging. I wasn't exactly sure how the screw covers worked.
That was the other thing that I don't know if I like. I put the screws through the ones with a hole in them (I couldn't see how else they would even work), and then the caps seem to fit nicely inside. The issue I have is that I have no idea how you remove them once they are in like that. Maybe you can put a screwdriver in and pry it off. It doesn't seem convenient.
The other thing about the screws is that even though it comes with a set of 4 covers it only includes 2 screws. So if you need to mount all 4 you have to provide at least 2 of your own. That seems like a strange oversight. Why include 4 screw caps and 2 screws? | Wanted a set to hang up at my gunsmith station. This works great | eng_Latn | 25,248 |
This is not necessary but I would recommend it to avoid frustration | Very straight forward removal and replacement to install. Used on Viking VGRT5366BSS: Viking 6 burner gas range top. Burners would not ignite even thought the burner sparkers were "clicking". Turn off electricity to the unit at the breaker box. Then remove a total of 10 screws to access the module. Simple removal of the range top front bar and front face plate after pulling knobs off and you have access to the module. I chose to unscrew the module from its mounting plate to make swapping of the spade connectors a little easier. This is not necessary but I would recommend it to avoid frustration. Net/Net - this is easy fix for almost any novice. | <div id="video-block-R1D7TOT5C0IM5H" class="a-section a-spacing-small a-spacing-top-mini video-block"></div><input type="hidden" name="" value="https://images-na.ssl-images-amazon.com/images/I/C1tY2N6-rPS.mp4" class="video-url"><input type="hidden" name="" value="https://images-na.ssl-images-amazon.com/images/I/91q-%2BvSjE9S.png" class="video-slate-img-url"> My purpose was to build up my forearm and grip. some say that this product is excellent for guitar players and I can see how this product assists in playing a guitar | eng_Latn | 25,249 |
A Live saver for reloaders. | This worked like a champ!
Drill the hole in the primer pocket.
Thread that hole
Put the spacer on the hole.
Turn Screw
Go back to reloading! | I purchased this for some long cold nights on the range up in the Sierra Nevada's, and it did exactly what it was supposed to do. It's not super bulky at all, but it could be a bit fragile. I usually wear it underneath a light jacket to keep the material safe. | eng_Latn | 25,250 |
Will not hold power bits securely. | This driver will not hold magnetic or power bits. I like the quality of this tool but to be useful for me I needed to adapt (file) a Make-It-Snappy power bit chuck which I drove it into the barrel of this driver. Now I can use any combination of magnetic or power bits securely without them falling out. | Used it to remove the back panel and replace my RAM. Did the job, and did it well. Just watch that you don't scratch that pretty silver! | eng_Latn | 25,251 |
Instructions Should Be Updated | I had ordered a different cage, but they were out of stock and sent me this cage instead. I'll start by saying its a beautiful cage once built. However the instructions were terrible. They fail to list the items included or the sizes of the screws, so it wasn't until I had already put a hole in the cage by using the wrong screw that I realized there were 2 sizes almost exactly the same but one being a bit shorter than the other. Also if you tighten the screws too much, even using the right ones, you will go through the cage, so now my birds have sharp metal inside their cage that I was unable to grind off without ruining the whole cage. Overall I love the look of the cage, its definitely larger than I expected, but it works beautifully and the birds love it. | Bought for my daughter for Xmas 2018. Dated graphics that are not appealing. As a result, not being used. | eng_Latn | 25,252 |
Worthless piece of junk | This is just a piece of scrap metal bent on a brake... it is not a replacement for the grills as advertised... it is squared ends, not angled like the original so it does not sit down on the holders properly and it half the width of the original part... I tried to use it anyway, but as soon as I lit the grill and it started to heat up, this piece of scrap twisted from the heat and that was the end of it being any kind of useful. Save your money. For the cost of this product I got absolutely zero service life. I rated it one star, simply because you can't rate something zero stars. Shame on Music City Metals for even selling this. | Who would want to be seen wearing these things. No sense of style at all. They are not even close to worth the price that they want for them. | eng_Latn | 25,253 |
Help! My DM4-3055dx does not have the same screw configuration as seen in online videos. Are there different configurations? | I wish I could help. I watched a video to learn to replace mine too but my screw holes were like in the video. | The one that I bought was 1 1/4" long. Also, the bottom piece is aluminum and the thin top piece is steel, not aluminum as advertised.I bought mine for a bipod mount and it worked perfectly, stayed ontight. I decided to go with a quad rail and took it off. I'll sendyou the one I have for free if you can find a way to get me youraddress without pissing off Amazon. | eng_Latn | 25,254 |
I bought it from amazon and the base has cracked. Is there a way I can order another base? | To my awareness, individual parts are not sold to customers. If the base arrived cracked, your best path is working with the seller in obtaining a replacement. If the base crack was caused by the shipper, please advise the seller. | I'm not positive, but I don't think so. Unless you used some kind of glue for the bottom, like Gorilla Glue. And then you would never get it loose from the TV stand or whatever you were using it on. But you couldn't attach it with nails or screws. Actually, if you knew you didn't want to change the size of it.. you could glue it.. as it does tend to move a little. I do have to adjust mine from time to time. Also, I used WD40 inside it to make it move smoother. | eng_Latn | 25,255 |
can you bolt the scrubber down | Yes, the scrubber can be bolted down and I reccomend that you do bolt it down as it will not work as good unbolted. I bought the base that can be attached to the scrubber so we would not have to bolt it down and we could move it to other places to be of use and I love it and it works perfectly. | Don't know, I use it on a honda foreman, I attach it with bungee cords and they work great. | eng_Latn | 25,256 |
I have a pretty heavy mic Shure PG58. Will this stand hold it? I think I have a standard Horseshoe grasp but I'm not sure. | LMFAO the PG58 is not heavy, it is 3/4 of a pound, a heavy mic is 5+ times that. Any cheap stand will handle a cheapo like a PG58 | The screw holes should line up. Blackhawk's stuff usually fits everything. If not, there's nothing a drill wont fix. | eng_Latn | 25,257 |
I bought this item a month ago, but now the sliding plate has a terrible wobble. tightened the bearing as much as I can, but the plate still wobbles. | I had a similar issue, and I wouldn't call it terrible, but there was definitely a wobble perpendicular to the track/rail. Tightening the bearing to the point that sliding movement is slower solved the issue though. Have you checked the bearings themselves? Is there a rust spot forming that might be making this movement? | You could try checking the tension using the instructions in the manual. If it's too loose it will come off. | eng_Latn | 25,258 |
How do you adjust the "Dial-A-Slice" feature? | Hold in both hands and pull opposite directions and and rotate to get either the 8 cut or the 16 cut. Now push together to lock in place. | I wish I could help you but I never tried to do so with mine and I sent it to Squaretrade under the warranty I had for it as it stopped working on the third time I used it. You could try the Saachi website: http://www.saachi.ae/ Other than that, I wouldn't have a clue. Sorry. | eng_Latn | 25,259 |
The left hand break lever broke...can I buy a replacement | That is a flaw in the design. I had two go on me. Depending on the age of the machine, you can contact Amazon.com for a defective unit and they will arrange for a replacement cable to be sent to you. With the second defective cable, they sent me a whole new scooter and had me return the defective to them (Amazon). Excellent customer service and better than trying to get anywhere with Drive, the manufacturer. | This is form fitted for the Ruger LCR, I doubt that it would fit. They might make one fitted for the Taurus 85, it is ambidextrous which is nice. | eng_Latn | 25,260 |
WHERE DO YOU GET SPARE ATTCHMENTS | There is absolutely ZERO support from the factory in China, and I wonder if they still exist. So, I wish you luck! | Yes buy the atlas QR-2 quick release and u won't have to worry about threads when detaching. | yue_Hant | 25,261 |
How large of bit can this Wolfcraftr table handle, I need to be able to use a 3.5 inch raised panel bit with it. | Don't use that bit with this table. The table itself is excellent, but doesn't have enought mass to use that bit safely. Buy the table, but use a vertical profile panel raising bit instead. Much safer bit in all respects, with a cleaner cut and way less vibration. | Thank you for your question. I am not sure if this laser specifically does what you are asking. However, you may be able to try the reset process; back the screws out for both the elevation and windage until there is a thread or two showing on each screw. Then let the laser sit turned off for at least one hour at room temperature then follow steps 1-6. Here are the specs from the dealer. Below are the specs from the manufacturer. - Compatible Firearms: Taurus 738 TCP, Taurus 709/740 Slim models - Power Output: 650NM, 5MW, Class IIIA - Programmable: Dual mode constant on and pulse, auto-off in 6 minutes - Batteries: 3 x 392 - Battery Life: Actual usage 5 hours constant on, 10 hours pulse mode - Material: 55% Glass Filled Nylon and Aircraft Grade 6061 aluminum - Length: 1.52" - Width: .76" - Height: 1.70" - Weight: .75 oz I hope this helps. [email protected] | eng_Latn | 25,262 |
Does this have a round or hex bar? | This has a round bar. When I got mine in 2006 I think Jet was changing design, since my saw had a 19mm hole and the guide bar in the ext block kit was 22mm diameter. I hope you will not have this problem unless your saw is older, since it took several tries for me to get the 19mm bar from Jet to fit my saw. I think the hex bar dates from an even older version. | Barnett part # 306-90-10072 has Kevlar friction plates and Steel plates. Important! measure your current clutch thickness (all the plates) and install NEW clutch plates so it is approximately the same thickness. You might not need to use one of the steel plates that is what I encountered. I have been using mine for several months and I love it! No more factory slipping when I let the ponys out!!! | eng_Latn | 25,263 |
Do these adapters fit with IKEA Lillibo tracks? | IKEA tracks are a weird duck, because they use longer pegs than most wooden track pieces from other companies (Thomas, Chuggington, Melissa & Doug), but they're still perfectly compatible. You'll find that the male slots from the IKEA pieces have a bit of a tighter fit into the female slots of these pieces, but that just makes them sturdier (though maybe a little more difficult for less developed toddler hands to manage). I have M&D;, Thomas, and IKEA track pieces in my son's train set, and they've rarely had any major issues with connectivity. | The bar has to be tightened to a smooth flat surface, but as I recall from many years ago, there is a "lip" and what the bar would have to be tightened to would not be wide enough. If there is a phone number or email address, call/write & ask. Of course, if it doesn't work, you can return it. | eng_Latn | 25,264 |
Can and where can you buy replacement pieces? I need the metal piece above the grate and under the stack. | Take measurements... i actually replaced mine at a local lawn and garden store... usually if you ask they have broken ones in the back or floor models that you can pick from for cheap... good luck :) | I wasn't able to find the unlock mechanism either. It was very frustrating! I sold the stupid thing at a garage sale for what I paid for it and went to Bed, Bath and Beyond where the store manager helped me find what I was looking for. So much for trying to go the cheap route. : ( | eng_Latn | 25,265 |
What is the size of the center hole? I need this for something not related to wine/beer making.... | It's about 5 mm. I don't have one in front of me right now, so that's just an estimate. | One of the tool holders it comes with is a parting tool holder. It is a screw clamp type: an allen head screw in the back of the holder tightens or loosens and angled wedge anchor at the front of the holder. Not sure of the height dimension of the parting tool slot on the holder, off the top of my head. I also purchased a 1/2" parting tool that works just fine. | eng_Latn | 25,266 |
Where can I get a replacement o-ring? | O-rings are the same between the Sportsman and the LEM They are available online from several websites. | Why do you think its an after market part? The one i received seems to be a Kohler part. | eng_Latn | 25,267 |
do these have metal or plastic screws? | These have metal screws. I was pleasantly surprised by the quality of these hoops...they are almost identical to my original Brother hoops that came with my machine. I've been using them for several months now, and have had absolutely no problems with them. I would definitely recommend these for the price! | It comes with a thin cheap piece of plywood/particle board that you're supposed to nail to the back but I didn't really see any reason to | eng_Latn | 25,268 |
I am trying to connect the keyboard pull-outs to the black metal but the screws dont seem to fit. Help? | I had to switch the screws with the rounded heads that are listed for the set of flat head screws that are needed in the last step. Then used those on the bottom of the keyboard tray at the end. | I actually returned this because the space bar is placed behind the tab that holds the two pieces together. So when you type you have to go behind the clip to use space bar. | eng_Latn | 25,269 |
The opening in our tile is 4x6. Other dishes I've seen have an area to adhere to the wall as 4x4. Is the back flat against the wall so the whole dish adheres to the wall? | no theres about a 4x3 abutment on the back of the dish that must be glued to the adhering inside wall | If you are talking about the screw that holds the convex mirror to the convex mirror housing, it is not an exotic screw. I didn't measure it, but I think it is a #8 x 1" pan head sheet metal screw. I'd suggest testing different screws until you find the right one so you don't cross thread the bore for this screw. I don't suggest glueing these two pieces together for two reasons. One is you can't remove the entire mirror unless you destroy the housing. The other is that the ball joint that allows adjustment is nicely tight. I found that removing the mirror from the housing, nudging the ball joint, then refitting and checking for view, was more successful than just pushing on one side or the other with my thumb as is suggested in the instructions. If you are referring to the pair of screws that are part of the clamping mechanism, I tried to get extras that were a little shorter than as supplied and couldn't find them. They are a metric size, I think a #7. The hardware store I go to has a pretty complete stock, but not that size. It wasn't worth going to a specialty screw supply to find them. | eng_Latn | 25,270 |
How do I mount this on my 610? no hardware came with the top.???? | Michael, the mounting hardware should have been in the box taped to the top. Both tops I ordered included the bolts, nuts, clamps and spacers. Contact the seller and they will send them to you. | you may need to get an adaptor that has the correct thread size ...google your question please..I wish I could be more help | eng_Latn | 25,271 |
How do you know it is tight enough? | It's a matter of personal comfort. I make it tight enough to feel the effect, but not too tight where it begins to open when I bend over | I was able to slide the bolts inside the channels made for them to become a secure fit. | eng_Latn | 25,272 |
Did yours come with the hardware ie screws etc to attach the jig to the grinder platform? If not what did you use to attach it? | I don't remember if it came with hardware. I mounted on steel and used #12 FH machine screws drilled and tapped into steel. works great. | I actually filed my down to fit. it turned out pretty good. Be sure to measure you tripod carefully. If you have a file, its plastic and it files pretty fast.. So in the end I was happy. | eng_Latn | 25,273 |
I have installed this item but the mast will not retract fully. Should I trim the plastic track or is there another problem I should be looking for? | It was installed for me by my mechanic. I don't know what he did but it is working well. sorry I am of no help. | Make sure you use only 1 line clear through head. Make sure the arrow on the inner spool is in the right direction according to rotation of head. I fought mine until the light bulb came on and I realized I only needed 1 long piece of twine and needed to put inner spool in right and wind correctly. Works great now. Directions in manual not real clear. | eng_Latn | 25,274 |
can you resuse the plastic? I saved some from last year and would just need to buy the tape or will it not work again? | If you heated it to shrink it then it probably won't shrink more. But you can tape it up again. | I had to rig it onto mine. There wasn't enough room for me, to use that loop. The loop at the bottom of the stap, ties back through its self | eng_Latn | 25,275 |
what is the thread size for the mounting screw | The mounting screw for the pistol grip ball head is 3/8" 16 threads per inch. This is the standard for most larger capacity ball/pan/tilt heads. | Fit is perfect and install easy. I think I needed some longer than standard metric sockets. | eng_Latn | 25,276 |
Can the pivoting arm be fixed in place? I want this as a wall mount for a video projector and it is important that the arm not move once installed | I believe if you tighten the bolts securely, the arm will not move freely. But suggest you check with the manufacturer to be certain | As long as it is hanged at the same height and distance from one hook to another it won't lean that much, but of course, like any other things that is hanged there is still prone to leaning at one side if you hanged heavier stuff on only on one side. A tip of advice, I put the screws far apart from each other using 2 very durable hooks. | eng_Latn | 25,277 |
I have stone counter top how i mount this to that? | mount the piteba to a block of wood / 2x6 or 2x12. Then use Irwin quick clamps, they have soft feet, to hold it on. This is what I have always done. | Just the two screws that you see in the picture. Ther are 2 nuts that hold it down. Be carefull not to damage the brass spacers that the screws go through. They are covered with rubber surrounds. | eng_Latn | 25,278 |
Would it be ok to use these on a walmart mountain bike rear wheel that originally came with loose bearings? | I used them on a Mongoose mountain bike. They seemed to work fine for about a month until a broken spoke caused severe damage (unrelated to the bearings). | You need to set up the automotive search engine through your Amazon account by writing in your year, make and model of vehicle. then, when you choose something, It will tell you if it fits. My advice regarding this product, is to choose a different manufacturer. On top of the cap, it's printed in very small type, to tighten three clicks. I can tell you, if you tighten four or more, then the lock will not work again. This product is not worth it at any price. | eng_Latn | 25,279 |
My sofa recliner is by natuzzi #163955819 vend t:n cc:f with a handle on it | Handle broke off recliner. My son -in-law replaced it with no problem with the part we ordered through amazon. | I had a question in my email: "what is the rough?".Answer: Not having a "clue" about this product, I hired a plumber to install the tap for me. Having said that, connect w/the MOEN manufacturers on their toll free number. The number can be accessed by opening their web-site: www.moen.com. Hope this helps. | eng_Latn | 25,280 |
is this the comfort curve claw clips that have been discontinued by Goody | I'm sorry... I don't know. You might be able to call the Goody company with the model number (82778), and ask them. Hope that helps a little :-) | Ours broke, too. The batteries are just too heavy to be sitting upside down in a plastic compartment. We ended up trashing it, and decided to wait till they come up with one that uses smaller batteriesw, or is electric. | eng_Latn | 25,281 |
Are bolts made by metal reuired by airline? | Yes, the bolts/screws are metal and this kennel is accepted by the airlines. I travelled with 2 dogs in separate crates via airline smoothly. | I'm not sure. It fit great in my 2009 Chevy Silverado, but we used a noodle to level the seat in my wife's 2009 Jetta. | eng_Latn | 25,282 |
I need a side support for my snow rake. where can I get one? | I do not know; but try going to a hardware store and buying a flexible metal strap to use. You may need to drill a couple of holes and buy some nuts, washers, and bolts | Drains were not included. I bought these http://www.amazon.com/gp/product/B000RZVPCU/ref=oh_details_o09_s00_i00?ie=UTF8&psc=1 and they worked perfectly. | eng_Latn | 25,283 |
How many tips accompany this D650 soldering gun? | Do not know at this time I only used the one that was on it when I got it, it is a good soldering gun all I did was replace it with the same basic one I had for about 40 years... | It came with a plate that covered the 3 holes. I was surprised it was chromed plastic but has been ok. I got a soap dispenser for the spray hose hole | eng_Latn | 25,284 |
Do you feed the existing rod inside these, or do you snap these over ? I am looking for the kind that has a slit all the way down them and they snap | Yes, no need to remove the rod from the wall on either end... this has a slit that runs the entire length of the cover. | When I got mind the bolt only went in 1/3 the way. I called in about it not being long enough, they told me that was enough for it to work. I put it on and it works. a bag of bolts and a bag of nuts should have come with it. Just remove the 2 line cup first, then install the Grass Gator head, it should work fine. I use my same line cut 16" pieces from my sears brand once I used up the Gator line. works better to me. | eng_Latn | 25,285 |
Can this lock be welded onto a metal frame gate? How long is the shank? | I don't know if it can be welded, since it is metal, I think it would work. The shank is an inch or so. I am really not a DIY person, so I may not be the best person to answer your questions. | I am not sure if it would fit those devices, it fit my Kindle HD 7" perfect, so the Galaxy Tab 10.1 may be too big. The clamps and loops are definitely secure enough. They are very tight. | eng_Latn | 25,286 |
It doesn't seem like the one mounting spot (middle of the handle at the top) is enough to hold the weight of the paper. Would I be able to put a screw at each of the top corners through the material into the wall, or it is hard plastic? Thanks. It doesn't seem like the one mounting spot (middle of the handle at the top) is enough to hold the weight of the paper. Would I be able to put a screw at each of the top corners through the... » Read More It doesn't seem like the one mounting spot (middle of the handle at the top) is enough to hold the weight of the paper. Would I be able to put a screw at each of the top corners through the material into the wall, or it is hard plastic? Thanks. « Show Less | Actually, the top mount is more than enough to hold a heavier weight. The failure point is actually how the folders hang as they start to bend and can eventually fall off if you add a large amount of items into them. I am not sure if this is due to weight or the bulging of the folders that causes the problem, though I suspect the bulging is the real issue. This has only happened to me once in practice and was more to the fact that I had avoided my inbox for months... | Is the door actually broken or is it the plastic retainer? I had 3 of 4 plastic retainers break on my popper. It is the heat, I think. I replaced all the plastic hardware with metal hardware. It took a little effort to find/modify screws and retainers but I haven't had issues since. Also, buy some threadlocker and put it on the 7 screws that are in the kettle. I've lost a couple of nuts and washers over the years and wonder who ate them... They were never found. Anyway, a little threadlocker (Blue won't harden and allows removing hardware later. Red becomes hard and requires a lot of heat to remove hardware. I use blue) goes a long way for piece of mind. Is the door actually broken or is it the plastic retainer? I had 3 of 4 plastic retainers break on my popper. It is the heat, I think. I replaced all the plastic hardware with metal hardware. It took a little effort to find/modify screws and retainers but I haven't had issues since. Also, buy some threadlocker and put it on the 7 screws that are in the kettle. I've lost a couple of nuts and washers over the years and wonder who ate them... They were never found. Anyway, a little threadlocker (Blue won't harden and allows removing hardware later. Red becomes hard and requires a lot of heat... » Read More Is the door actually broken or is it the plastic retainer? I had 3 of 4 plastic retainers break on my popper. It is the heat, I think. I replaced all the plastic hardware with metal hardware. It took a little effort to find/modify screws and retainers but I haven't had issues since. Also, buy some threadlocker and put it on the 7 screws that are in the kettle. I've lost a couple of nuts and washers over the years and wonder who ate them... They were never found. Anyway, a little threadlocker (Blue won't harden and allows removing hardware later. Red becomes hard and requires a lot of heat to remove hardware. I use blue) goes a long way for piece of mind. « Show Less | eng_Latn | 25,287 |
The screws on my hinges pulled out making the hole bigger than the screw. Will this fiix this problem? | This will not fix your issue. I would suggest buying a product called JB WELD and filling the holes with the syrup. once it hardens, predrill small holes with a drill bit then the screws you have left will catch their threads on the solid JB WELD | I hope you bought it from a place where you can return it without extra cost to you... because the alternative is to pack it up and ship it to manufacture for fixing... You pay the shipping cost both way... Lousy Company Guarantee policy... | eng_Latn | 25,288 |
I purchased this but how do you mount it on the axle. Single screw doesn't seem to hold up the flag vertically. Is there an attachment for this? | On a bike you remove the nut that holds the axle to the frame (opposite of the gear cogs), put the mount on the thread and then put the nut back on and tighten it down. It will not move if you do it right. | This monopod comes as a kit. It's got a fluid-like friction head and a fluid swivel base as well. I believe the plate included is a 501 which is the standard issue for the 577 RC Adaptor. You're good to go with this monopod. It's a great rig. Top of the line. | eng_Latn | 25,289 |
is a 1/4 inch wrench in this set? M.D. | No, it is a set of metric sizes for use on GM or foreign cars. 6mm is close to 1/4" and might fit. | It did not come with tools. Other iPhone 4 parts do come with tools. It usually states that in the product description. | eng_Latn | 25,290 |
how to replaced string | First of all, the string (line) goes on opposite of the arrows. The arrows on the bobbin point the way you turn the bobbin. Secondly, you cut the length recommended, thread through the bobbin and wind both sides at the same time. No doubt it's awkward and hard to keep the line from unwinding as you attempt to thread it through the cup holes, but it can be done with a little practice. | Not my knowledge Ive only been able to have it the way it came in the image | eng_Latn | 25,291 |
would like a hook for my new hitachi frming nailer. is there one for the NR 90AD(S) | Lyndsey I have 6 of these guns and the 60605X nail gun hanger works perfectly go to amazon and look up nail gun hangers for hitachi guns pops right up hope that helps | I don't know, but do an internet search for Huck's Products, email the owner Randy, and he will be able to tell you. If it isn't a perfect fit out of the box, Randy will have a way to modify it very inexpensively. He has kept my Total Gym Elite, from 2005, in great working order -- very inexpensively. He sent me plastic shims to make the ab attachment work on my Elite. The shims worked great and I haven't had any problems with them and I use the ab attachment daily. | eng_Latn | 25,292 |
Will these work for most 'toys' that seem to have the world's smallest screws? | Yes, without a doubt. Not just this case, but any case of any brand that looks similar to these do. That's mostly what these are for anymore, haha. | Theoretically. I say that because the unit I got was completely non-functional, so it wouldn't spin anything. Seemed like very poor quality control, and I opted not to waste my time on trying another one. | eng_Latn | 25,293 |
What is the mounting hole diameter required for this lock? | 3/4" from its widest threads. The threaded portion actually has two flat sides, presumably, so you can clock it if you had a double-d punched hole. | If you are talking about the screw that holds the convex mirror to the convex mirror housing, it is not an exotic screw. I didn't measure it, but I think it is a #8 x 1" pan head sheet metal screw. I'd suggest testing different screws until you find the right one so you don't cross thread the bore for this screw. I don't suggest glueing these two pieces together for two reasons. One is you can't remove the entire mirror unless you destroy the housing. The other is that the ball joint that allows adjustment is nicely tight. I found that removing the mirror from the housing, nudging the ball joint, then refitting and checking for view, was more successful than just pushing on one side or the other with my thumb as is suggested in the instructions. If you are referring to the pair of screws that are part of the clamping mechanism, I tried to get extras that were a little shorter than as supplied and couldn't find them. They are a metric size, I think a #7. The hardware store I go to has a pretty complete stock, but not that size. It wasn't worth going to a specialty screw supply to find them. | eng_Latn | 25,294 |
How can I lower the tripod to the minimum hight and mount the Camera on the center without putting the center column in horizontal position? | The trípod has a gray push-on secure at the beginning of each leg, you just push it and change the angle of them. | I purchased three stands as well, and my pots are about 8" in diameter at the very bottom and the pots are angled. As long as your pot is tapered and smaller at the bottom, they shouldn't be cock-eyed. I haven't had a problem with that at all, and I've had them for a year now. I also got this one that another pot sits directly on top of, and it looks nice as well. Panacea 89164 Olde World Forged Pot Trivet, Black, 12-Inch | eng_Latn | 25,295 |
will this holder work with the 12 hole Hohner Chromatic model? | With a tape measurer the harmonica holder will fit a harmonica that is 4.25 inches comfortably. My golden melody has less than 3/8 room to adjust from left to right when i set it in. Hopefully this was helpful. Height wise i can open it 1.5 inches when i really try to open it. I have a hohner chromatica at home, i will update when i get home. | Mine did not. I also doesn't have a way to close the irons when not in use. What you see if what you get. I returned mine. Didn't work well for me. | eng_Latn | 25,296 |
Are you able to purchase replacement screws? | To purchase them from the owner, I'm not sure, but yeah I'm pretty sure the screws are replacable they are very common on other knives. I wouldn't worry about it too much. I have used this knife every day for like 5 months and used it plenty, it's actually worth it, I don't think you'll have to be replacing it anytime soon or ever. | Thank you for contacting Parts Express. The item is sold individually, not as a pair. Sincerely, Customer Service Team | eng_Latn | 25,297 |
The feed lines require a wrench to tighten, how does one get the wrench in there? | This is the problem I ran into, there was no way that I had found. I ended up getting something different due to continues leaks. Sorry you were taken as well. | Best way to get the right answer is to visit the manufactures web sight. The have a fitting guide that was helpful in selecting the proper size for your gun. I was able to select the proper size for my gun and it was the proper fit. | eng_Latn | 25,298 |
Has anyone actually had one of these Stens pins do what it is supposed to do and shear when the auger was obstructed? | I replaced the OEM Aries shear pins with these. All of the dimensions of the pins were the same when measured. Since replacing I haven't sheared one. Sorry I couldn't be of more help. | I use only clipper 70001 undulated staples with my Ace model 702 staplers. The combination has worked flawlessly. Best stapler ever made. Never jams. Staples hold better than any other type. | eng_Latn | 25,299 |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.