Search is not available for this dataset
query
stringlengths 1
13.4k
| pos
stringlengths 1
61k
| neg
stringlengths 1
63.9k
| query_lang
stringclasses 147
values | __index_level_0__
int64 0
3.11M
|
|---|---|---|---|---|
what is the recommended temperature setting for a tankless water heater
|
For a tankless heater, this means that there is a smaller draw of hot water at 125 degrees and a larger draw of cold water. Since the draw of hot water is reduced, the amount of gas to heat the smaller flow is also reduced.For washing dishes or laundry, the higher temperature will cost you more money as the temperature may not be offset with cold water.ince the draw of hot water is reduced, the amount of gas to heat the smaller flow is also reduced. For washing dishes or laundry, the higher temperature will cost you more money as the temperature may not be offset with cold water.
|
The Eccotemp iE-11 11kW Electric Tankless Water Heater The Eccotemp iE-11 11kW Electric Tankless Water Heater is the perfect fit for 1 to 2 single use applications such as a single shower sink washer dishwasher located in warmer climates averaging incoming water temperatures above 65°F.
|
eng_Latn
| 35,400 |
cost of an immersion heater per hour
|
A typical electric immersion heater for you hot water tank is 3kW (Kilowatt). With a typical daytime electric tarriff of 15p per kWh (kilowatt hour), it costs 45p per hour to heat your hot water with an immersion. Heating with gas will be significantly cheaper.Gas is currently 5p per kWh and assuming you have an old inefficient boiler running at 80% efficiency, it will be costing you 7p per kWh.ssuming you are paying 15p per kwh this equates to 15p per day or £54 per year. If the immersion is on just before you need the hot water rather than heating up hours before then the standing losses will be reduced. A simple way to save £54 is turn the immersion on 2 hour before you need the hot water.
|
If you leave your immersion always switched on, think about when you use hot water. If you have a well insultated cylinder it will lose about 1 kwh per day. That is it loses the heat equivalent to a 1 kw heater being on for 1 hour. Assuming you are paying 15p per kwh this equates to 15p per day or £54 per year.If the immersion is on just before you need the hot water rather than heating up hours before then the standing losses will be reduced.A simple way to save £54 is turn the immersion on 2 hour before you need the hot water.ssuming you are paying 15p per kwh this equates to 15p per day or £54 per year. If the immersion is on just before you need the hot water rather than heating up hours before then the standing losses will be reduced. A simple way to save £54 is turn the immersion on 2 hour before you need the hot water.
|
eng_Latn
| 35,401 |
how hot does taco pump motor get
|
Taco pumps maximum temperature is 240 F Taco 00 series cartridge circulators are designed to run at temperatures up to 240 degrees F continuously. That is one of the most frequently asked questions for Taco. The motor is cooled by the water being pumped (in most cases the water is 180 degrees) so the pump skin temperature can far exceed 200 degrees. This is normal, and not a detriment to the pump. If you have any additional questions about the Taco 007, please call me direct.
|
⢠engine-driven fuel pump ⢠fuel control unit (FCU) ⢠torque limiter ⢠flow divider and dump valve ⢠fuel manifold and nozzles. The engine's boost pump draws fuel from its nacelle tank and provides it under pressure to the oil-to-fuel heater where it is heated by warm engine oil. As fuel temperature increases toward 70°F (21°C), the heater's bypass valve admits less oil into the heater. Once fuel temperature reaches 90°F (32°C), the bypass valve closes completely. Fuel flows from the heater to the engine-driven fuel pump. Before entering the pump, fuel flows through a strainer. If the strainer clogs, a bypass valve routes fuel around the strainer. The pump pressurizes the fuel to approximately 800 PSI before it flows through a filter. Like the strainer, the filter also has a bypass valve. A transmitter between the fuel control unit and
|
eng_Latn
| 35,402 |
how long does a hot water tank last
|
Step 6 Check the tank's age Check the age of your hot water tank. Most hot water tanks are warrantied for 5 to 10 years. While many last for years beyond the warrantyâs expiration, if you notice inadequacies in your tankâs performance and the tank is beyond its warranty date, itâs probably time to get a new one.
|
Tankless water heaters also tend to last longer than the tank variety. They can last as long as 20 years, where tank style water heaters have a life of closer to 12 years. The drawback of a tankless water heater is that it can only heat so much water at any given time.
|
eng_Latn
| 35,403 |
water heater temperature savings temperature
|
Most households can have the temperature set between 120ºF and 130ºF on their water heaters. If you are concerned about energy savings and reducing your monthly energy bill then set your heater temp to 120ºF and see if that is sufficient for your needs.
|
Save. Although manufacturerâs usually set water heaters at 140 degrees F, you can reduce your carbon footprint and save money by adjusting your water heater thermostat. According to the U.S. Department of Energy, for each 10 degree reduction in water temperature, you can save between 3 and 5 percent in energy costs.They also recommend setting water heater temperature to 120 degrees F at the faucet to reduce the danger of scalding. (Jupiterimages/liquidlibrary/Getty Images).ccording to the U.S. Department of Energy, for each 10 degree reduction in water temperature, you can save between 3 and 5 percent in energy costs. They also recommend setting water heater temperature to 120 degrees F at the faucet to reduce the danger of scalding. (Jupiterimages/liquidlibrary/Getty Images).
|
eng_Latn
| 35,404 |
how long does it take a water heater to heat water?
|
While this is not exact, it is typically based on heating 1 full tank from 45F to 120F. Most 40 and 50 gallon units require 40 minutes to 1 hour. Between 30 minutes and 1 hour. Depending on amount of water used before and age of heater. This depends on age and how many gallons it is heating. If it is new & just filled or you ran out of hot water, About an hour. 3kW electric on a 50 gal tank (US) = 10,236 BtuH on 400 lb water. Since 1 BtuH = 1 lb water/1 degree F/Hr then 10,236 BtuH will heat 400 lb by about 25 deg F. in one hour. If you fill the tank completely with cold water at 40 deg F and want it at 140 deg F, then it will take about 4 Hr. Same tank on natural gas at 50,000 BtuH will take about 45 min.
|
When the temperature of water inside the tank drops below 110 F. Once the water inside the tank is heated above 115 F condensation should stop. It takes up to 2 hours for water to heat up to the temperature where the condensation stops. During the cold start-up of the brand-new unit. An undersized gas heater. Temperature setting is too low. Large amount of hot water is used in a short time while the incoming water is very cold.
|
eng_Latn
| 35,405 |
what percentage of gas bill is typically hot water
|
In 2014 the average dual fuel reached an eye watering £1,344. The average electricity bill was £592 and the average gas bill was £752. But averages can be confusing. So to give you a better idea of how your own bill compares weâve estimated the total bill for small, medium and large users in the chart above.
|
Starting from an ambient temperature of 18°C (water at equilibrium), and heating to a boil, the gas meter reveals 1.09 MJ of energy was used on top of the steady burn from the hot water heater pilot light, at a rate of 4500 W (about 15,000 Btu/hr). measured the temperature of the water emerging from the (hot only) tap, and from a tap right at the inlet from the street (adjacent to water heater, too). I used the water meter by the street to gauge volumetric use to a precision of 0.01 cubic feet (0.3 ℓ).
|
eng_Latn
| 35,406 |
how much energy an ice absorb
|
1 The process involves the ice melting to water, the water heating from 0 °C to 100 °C, then the water boiling to steam. The energy absorbed will be the heat of fusion + the change in temperature of the liquid + the heat of vaporization, qfusion + qheating + qvaporization.
|
The specific enthalpy of fusion of water is 333.55 kJ/kg at 0 °C, i.e. melting ice absorbs the same energy as ice warming from -160 degrees Celsius up to its melting point. Similarly the heat needed to melt ice at 0°C, would heat the same amount of water by about 80°C.
|
eng_Latn
| 35,407 |
what is a steam oven
|
Steam ovens boil water from an inbuilt reservoir to create a cloud of steam within the oven chamber. This moist heating method is the reason why steam cooking offers significant benefits.
|
A steam engine is a machine that burns coal to release the heat energy it containsâso it's an example of what we call a heat engine. It's a bit like a giant kettle sitting on top of a coal fire. The heat from the fire boils the water in the kettle and turns it into steam.
|
eng_Latn
| 35,408 |
how many minutes to boil water
|
If drinking water is of questionable purity, boil the water for at least five minutes, and/or add bleach, and/or distill drinking water before using if a distiller and electrical power or an alternative heat source are available.
|
The water will quickly heat up as the hot rock transfers its heat to the water. You will need enough rocks in the fire to keep adding them to the container of water often enough that the water comes to a boil and stays boiling for the required time (5-20 minutes). Filtering. Commercially available water filters:
|
eng_Latn
| 35,409 |
how long is a hydrostatic test good for
|
(B) For a cylinder having a water capacity over 12 pounds-- (1) By hydrostatic test without determination of expansion (modified hydrostatic test method). A retest must be performed 12 years after the original test date and at 7-year intervals; or (2) By hydrostatic test using the water jacket method. A retest must be performed 12 years after the original test date and at 12-year intervals thereafter.
|
Water or steam type fire extinguishers should be discharged, disassembled and inspected annually (NFPA 10, 4-4.1.1). Dry chemical extinguishers that require a 12-year hydrostatic test are required to be emptied and subjected to applicable maintenance procedures every six years.
|
eng_Latn
| 35,410 |
how tankless water heaters work
|
To accomplish the job, your boiler has a tankless water heater. In this system, a coil of pipe is connected at one end to the cold water supply, and at the other to your hot-water delivery piping. As the boiler heats the water that warms your home, that water heats the coil, creating hot water at your taps.
|
What They Do. Tankless water heaters provide hot water where you need it -- such as the kitchen sink -- by heating the water quickly when the faucet is turned on. This can save on water costs if you typically have to run water for some time to get it heated.
|
eng_Latn
| 35,411 |
how water brings pressure down
|
In contrast, the more water you drink, the more fluid your kidneys excrete as urine, explains physician Julian Whitaker. Because there's less need to conserve water, your small blood vessels open up, and blood pressure goes down.
|
What happens then is water displacement. The sandy partials that collect on the bottom of the tank displaces the water ever so slightly. This results in hot spots on the bottom of the tank. When this occurs the flames overheat the tank and begin to break down the steel.
|
eng_Latn
| 35,412 |
how many btus to raise water temp
|
You will still require 8.34 BTU to raise the temperature of a gallon of water one degree F. 1 I say approximately because the weight of water varies slightly with its temperature. 2 Water is at its densest at 4 degrees Celsius (39 degrees F). 3 A gallon of water at temperatures above and below that value will weigh less.
|
BTU = British Thermal Unit. A BTU is the amount of energy required to raise one pound of water one degree fahrenheit. On burners it refers to a rating and the number is a calculated value. The manufacturer determines what their rating is. Some burners are rated by the manufacturer to go to 23K BTUs.
|
eng_Latn
| 35,413 |
temperature of ground water
|
Geothermal heat pumps have been used for many years in Florida. In the North, where the heating cycle is crucial, ground water temperatures average about 52°F. There is less flexibility available in severe northern climates for lowering the ground water temperature before freezing occurs.
|
WATER TEMPERATURE. The water temperature is fairly constant throughout the year and is generally in the mid to high 70's F (23-26 C), but can reach the low 80's F (26-28 C. A lightweight lycra body suit, more for protection from coral abrasions than for warmth, is a good solution.
|
eng_Latn
| 35,414 |
minimum steam table temperature
|
Food that is reheated must reach a minimum internal temperature of at least 165°F for 15 seconds. Reheating must be done rapidly and the minimum temperature must be reached within two hours. Steam tables, warmers, or similar equipment do not heat food quickly enough and must not be used for reheating food.
|
Gentlemen, I am struggling to find a workable definition of the steam conditions supercritical and ultra supercritical power plant and would appreciate any assistance that can be offered. I tend to think of supercritical as generally steam conditions of 250bar/570C/570C with maximum conditions of 270bar/580C/580C.
|
eng_Latn
| 35,415 |
how long do gas water heaters last
|
Water heater replacement clue #1: Age. The older a water heater gets, the more likely itâs about to break down. Electric water heaters generally last 8-10 years, while gas water heaters may only be good for 6-8 years.If your water heater is any older than this, it may be time to check for some of the symptoms below.ater heater replacement clue #1: Age. The older a water heater gets, the more likely itâs about to break down. Electric water heaters generally last 8-10 years, while gas water heaters may only be good for 6-8 years.
|
The average lifespan of a traditional tank-style natural gas water heater or electric water heater is only eight to 12 years, which makes replacement one of the most common home improvement investments.
|
eng_Latn
| 35,416 |
how much oil does the furnace use a day to heat hot water
|
I have an old Crane Sunnyday 15 oil furnace with integral water heating coil for the household use. Based on my oil consumption during the Summer months, when the burner does not operate to heat the hot water cast iron baseboard radiators, I'm using ~1.25 gal/day to heat the water. I am the only one in the house, take one shower/day and wash a few dishes. I use the dishwasher for most stuff and run that every four or five days.
|
Heating oil produces 138,500 British thermal units per US gallon (38.6 MJ/l) and weighs 8.2 pounds per US gallon (0.95 kg/l). Number 2 fuel oil has a flash point of 52 °C (126 °F). Most heating oil products are chemically very similar to diesel fuel used as motor fuel.
|
eng_Latn
| 35,417 |
what is the heat index of water
|
Lucky for me, you, and our fish in the pond, water does indeed have a very high specific heat capacity. The specific heat of water is the amount of heat needed to raise its temperature a certain amount. One of water's most significant properties is that it takes a lot of heat to it to make it get hot. Precisely, water has to absorb 4.184 Joules of heat for the temperature of one gram of water to increase 1 degree celsius (°C). For comparison sake, it only takes 0.385 Joules of heat to raise 1 gram of copper 1°C.
|
the specific heat of water is 1 calorie gram c 4 186 joule gram c which is higher than any other common substance as a result water plays a very important role in temperature regulation the specific heat per gram for water is much higher than that for a metal as described in the water metal example
|
eng_Latn
| 35,418 |
how hot should hot water be from the tap
|
To prevent tap water scalds, the hot water at your faucet should be no higher than 49 degrees C or 120 degrees F. Step 1: Find out how hot your water is at the faucet. Run the hot water for two minutes (wait a couple of hours before doing this test if youâve been using a lot of hot water). Fill a cup with hot water from the faucet and test the temperature with a thermometer that reads high temperatures. Wait 30 seconds and check the temperature.
|
The temperature of hot tap water varies from home to home, and it depends on the temperature at which the hot water heater is set. Typical home hot water heaters heat water to less than 120 degrees Fahrenheit.
|
eng_Latn
| 35,419 |
does tankless heater always work
|
How Tankless Water Heaters Work. ÂIt's the holiday season and your peaceful suburban domicile is overflowing with houseguests. You need a nice, hot shower to soothe your nerves, but you're in line behind your in-laws and cousins. In times like these, you'll be glad you installed that new tankless water heater in your garage. The idea behind a tankless system is that it heats the water as you need it instead of continually heating water stored in a tank.
|
Hot water is there when you need it with a tankless water heater. Whether you're taking a shower, cooking food or washing the car, a steady supply of hot water is a necessary part of your daily routine. A high-efficiency tankless water heater can help you meet all of your hot water needs. It's ideal for a small single family home or apartment where extra space is at a premium. A tankless water heater can also work with side by side with a natural gas water heater to provide an additional supply during times of day where hot water is in high demand. Sears has an array of tankless water heaters that are easy to install and even easier to use.
|
eng_Latn
| 35,420 |
at what pressure does water boil
|
The boiling point of water is 100°C or 212° F at 1 atmosphere of pressure (sea level), but water boils at a lower temperature as you gain altitude (e.g., on a mountain) and boils at a higher temperature if you increase atmospheric pressure (lived below sea level).
|
The boiling point of water is 100°C or 212° F at 1 atmosphere of pressure (sea level), but water boils at a lower temperature as you gain altitude (e.g., on a mountain) and boils at a higher temperature if you increase atmospheric pressure (lived below sea level).ere's the answer to this common question. Answer: Short Answer: The boiling point of water is 100°C or 212° F at 1 atmosphere of pressure (sea level).
|
eng_Latn
| 35,421 |
can a water heater be flushed
|
You can enhance the efficiency and prolong the life of your water heater by flushing it out. This is especially important if you do not have a water filter on the incoming line of your water supply to your house.
|
Remove the blockage by flushing the heater core with fresh water from a garden hose. Answer You can flush the heater core by removing the inlet and outlet hose connections and then using a garden hose to back-flush the core.nother more effective method involves flushing the entire cooling system, which is probably a good idea if the core is stopped up. Look for a flush kit that installs into the heater lines (Prestone makes a decent kit). Drain the cooling system, then attach a garden hose to the T installed in the heater line.
|
eng_Latn
| 35,422 |
why is refrigerator water hot
|
Water tank/reservoir is inside the fresh food section ( behind the lower crsipers ) and should be the same temp as inside ( water line does come out of the cabinet, runs underneath the refrigerator and up the freezer door to the dispensor so the first little bit of water is always warm(er) than the rest ).
|
Therefore, you want your refrigerator to be cold, but not so cold that it freezes things. The preferred temperature is somewhere between 35 and 38 degrees F (1.7 to 3.3 degrees C).Anything higher and foods will spoil too quickly (it also presents food poisoning problems, as described in several of the links below).If you have read How Food Preservation Works, then you know that the purpose of a refrigerator is to slow down the growth of bacteria. The purpose of a freezer is to stop bacteria completely by freezing them solid.
|
eng_Latn
| 35,423 |
how long to boil water for safe use
|
Most germs die quickly at high temperatures. Water that has been boiled for 1 minute is safe to drink after it has cooled. If no other method of water disinfection is available, very hot tap water may be safe to drink if it has been in the tank for a while. A variety of filters are available from camping stores.
|
NOTE: Caveats regarding Safe Water Boil Times: Boiling water will NOT remove chemical toxins that may be present. Very dirty water should be filtered first with a cloth or other material to remove sediments, and/or let stand for awhile to allow sediments to settle â then pour off clearer water on top. Stop wasting fuel.oâ¦a rolling boil for 3 minutes is about as LONG as you need to boil, for security. But fact is..water cools slower then it heats up (since we apply energy to boil it, pressurized stove, fire, electricity).
|
eng_Latn
| 35,424 |
what is celsius boiling point of water
|
The boiling point of water is 100 degrees Celsius or 212 degrees Fahrenheit at 1 atmosphere of pressure (sea level). Jody Dole, Getty Images. Anne Marie Helmenstine, Ph.D.
|
100 degrees Celsius or 212 degrees Fahrenheit after that it is steam. The nominal boiling point for pure water is 212 F, 100 C. This point is changed by ambient pressure variations, which are mainly caused by changes in altitude and weather (Highs and Lows). Contaminants (e.g. salt in sea water) can also have an effect.
|
eng_Latn
| 35,425 |
how to measure btu on a hot water storage tank
|
It takes one Btu per pound of water to raise the temperature by one degree Fahrenheit. The standard size of American hot water heaters is 40 gallons, and each gallon of water weighs 8.33 pounds. Calculate the Btu. If you have a 40-gallon water heater, that is 40 multiplied by 8.33, or 333.2 pounds of water. So you need 333.2 Btu to raise the water 1 degree Fahrenheit. However, most areas need more than one degree of heat added to the water to make it warm enough for showering or washing clothes or dishes.
|
The water heater is rated at 11,000 to 199,000 Btu/hour gas input, has a maximum hot water delivery (at a 45°F temperature rise) of 8.4 gpm, and has a minimum flow rate of 0.26 gpm. There are two primary types of water heaters: storage and tankless.n the case of electric storage tank water heaters the wall loss is less than 10% of total water heater energy use. Conventional gas fired storage water heaters DO have very high standby losses, but that has little to do with tank wall insulation but LOTS to do with convective loss up the central flue.
|
eng_Latn
| 35,426 |
temperature water boils at sea level
|
The lower the pressure the lower will be the temperature at which water boils. At sea level water boils at 212 degrees Fahrenheit; At 12,087ft in Tibet, water boils at 188.6 degrees Fahrenheit; At the top of Mt. Everest water boils at 159.8 degrees Fahrenheit.
|
1 While most people know that water boils at 100 °C (212 °F), this is at the normal conditions of sea level. 2 Water expands as it cools from 4 °C to 0 °C (above 4 °C it does the opposite). 3 Water can move up narrow tubes against the force of gravity in what is known as capillary action.
|
eng_Latn
| 35,427 |
what is a chilled water system make up tank for
|
Lochinvar Chilled Water Buffer Tanks are designed to. create volume in a chilled water system when the system. and associated piping can not provide the chiller with. the volume required for efficient operation. To meet this. criteria, Lochinvar has designed a Chilled Water Buffer. Tank that is an ASME certified vessel and is available in.
|
DHW tank. The heat pump version of the hydrobox can reverse the cycle and provide chill water for. cooling through fan coil units. Daikin Altherma can heat spaces, produces domestic hot water and with the. heat pump version hydrobox or monobloc can cool spaces.
|
eng_Latn
| 35,428 |
what temperature should my water heater be set at
|
Whether you have a gas or electric water heater, the default temperature set from the factory will be between 120ºF to 140ºF.It is estimated that the average water heater temperature is set to 130ºF in the United States.ncreasing your water heater temperature by just 10ºF from 130ºF to 140ºF may increase heat loss resulting in a larger electric bill from $30 to $75 dollars annually. Setting the temperature to 140ºF can also increase demand losses resulting in an annual expense of up to $500 dollars.
|
At 120 degreesFahrenheit / 48 degrees Celsius, the recommended temperature setting for home water heaters,skin requires five minutes of exposure for a full thickness burn to occur. When the temperatureof a hot liquid is increased to 140 o F / 60 o C. it takes only five seconds or less for a serious burnto occur 1.
|
eng_Latn
| 35,429 |
what happens to water in a vacuum
|
a water filled balloon in the chamber and to their surprise, nothing happens. Water does not have the same expansion properties of a gas and the skin of the balloon exerts enough pressure
|
The way this relates to your question is this: if the pressure of the vacuum into which you place your water is lower than the vapor pressure of water at the temperature in the sample, the water will boil. You can boil water at room temperature if you reduce the ambient pressure to below the vapor pressure of water.
|
eng_Latn
| 35,430 |
what causes a water heater to stop working
|
A heater can stop working for a number of reasons, including: â¢A low antifreeze/water level in the radiator due to a leak in the cooling system. â¢A bad thermostat that isnât allowing the engine to properly warm up. â¢A blower fan that isnât working properly.
|
Like most parts, water heater elements have a finite working life. Continual cycling to satisfy hot water demand eventually wears out the element. Mineral deposits in the water hasten an elementâs demise. The heating cycle causes dissolved minerals to solidify. They can coat an element, acting like a jacket of insulative material. In some cases, mineral sediment collects at the bottom of the water heater tank, encasing the lower element. Forced to work harder, the element eventually fails.
|
eng_Latn
| 35,431 |
what process do heat pumps use to produce heat
|
water heating is a thermodynamic process that uses an energy source to heat water above its initial temperature typical domestic uses of hot water include cooking cleaning bathing and space heating in industry hot water and water heated to steam have many uses domestically water is traditionally heated in vessels known as water heaters kettles cauldrons pots or coppers these metal vessels that heat a batch of water do not produce a continual supply of heated water at a preset temperature rarely hot water occurs naturally usually from natural hot springs the temperature varies with the consumption rate becoming cooler as flow increases
|
A Ground Source Heat Pump is a central building heating and/or cooling system that takes advantage of the relatively constant year-round ground temperature to pump heat to or from the ground.eat pumps can transfer heat from a cool space to a warm space, against the natural direction of flow, or they can enhance the natural flow of heat from a warm area to a cool one. The core of the heat pump is a loop of refrigerant pumped through a vapor-compression refrigeration cycle that moves heat.
|
eng_Latn
| 35,432 |
how often should a water heater be flushed
|
Two Parts:Flushing the HeaterFinishing UpCommunity Q&A. Water heaters should be flushed every one to three years depending on the model and water source. This helps to control the buildup of mineral deposits. Your water heater will operate more efficiently and this will usually extend the life of the heater. Use this guide to flush your water heater.
|
Typical filtration cycles are four hours, twice per day (for hot tubs operating a single or two speed pump). Reducing the cycles to 3 hours twice per day will save water pumping energy. These circulation times should be set for off-peak hours. (Some hot tubs have small, low wattage circulating pumps that run 24 hours a day. Typically these draw less energy than a 100 watt light bulb.
|
eng_Latn
| 35,433 |
what is rankine cycle superheat
|
Rankine cycle. The Rankine cycle is a model that is used to predict the performance of steam turbine systems, though the theoretical principle also applies to reciprocating engines such as steam locomotives. The Rankine cycle is an idealized thermodynamic cycle of a heat engine that converts heat into mechanical work while undergoing phase change. The heat is supplied externally to a closed loop, which usually uses water as the working fluid.
|
Scale information. The Rankine scale is a thermodynamic (absolute) scale named after the Scottish engineer and physicist William John Macquom Rankine (1820-1872), who proposed it in 1859. The freezing point of water is set at 491.67°R and the boiling point at 671.64102°R.
|
eng_Latn
| 35,434 |
sparge water temperature
|
This is easy to translate to gallons and degrees F. (for example, suggested sparge water temperature is 167° F., which is 75° C.). It also features a stay warm feature - after the target water temperature is hit, it will keep it at the desired temperature as long as it is on.
|
Temperature gradients should be provided for the water, ambient air and basking area. Water should be maintained within the range of 75 to 80 degrees Fahrenheit; ambient air between 80 and 85 degrees, and the basking area should be kept between 85 and 95 degrees.
|
eng_Latn
| 35,435 |
water heater takes how long to heat
|
Take the electric hot-water heater recovery times and divide them in half to get the recovery time for a gas unit. Water coming into a 50-gallon tank at 40 degrees takes just 53 1/2 minutes to reach 120 degrees. For 60-degree water entering the tank, calculate about 40 minutes needed for the water to reach the 120-degree temperature. For 70-degree water, it would take 33 minutes.
|
A water heaterâs useful life varies, depending on the type of water heater, the quality of the unit, and how well itâs been maintained. A traditional tank-type water heater lasts an average of eight to 12 years.
|
eng_Latn
| 35,436 |
what is the boiling temperature of water
|
The boiling point of water is 100°C, 212°F or 373.15 Kelvin under standard conditions at sea level (at one atmosphere of pressure). The boiling point of water and any other substance depends on the atmospheric pressure, which changes with elevation. At higher altitudes, the pressure is lower, and so water boils at a lower temperature. If the barometric pressure is not at the standard value, the boiling point will be different. For example, water boils at 72 degrees Celsius on Mount Everest. Under a partial vacuum water boils at room temperature.
|
The boiling point of water is always 100 C (212 F). The differences in the boiling point of water depends on the: altitude, extra ingredients in the water (salt, sugar, alcohol), and water hardness (due to the mineral contents). LdatM · 7 years ago.
|
eng_Latn
| 35,437 |
when water turns to vapor or steam meaning
|
It also is odorless. First though, lets define what steam is. Steam is water. that has been boiled into a vapor. It takes very little heat. energy to raise the temperature of water to reach its boiling. point. Say you put a pint of 320F water in a pan on the stove. A. pint of water weighs approximately 1 pound.
|
This conversion of liquid water to water vapor (steam) is what you see when you're looking at a pot of boiling water. As we all know, for pure water at standard pressure (the air pressure that exists at sea level), the temperature at which this occurs is 212°F (100°C).
|
eng_Latn
| 35,438 |
how does solar geyser work
|
Domestic Solar Geysers. Solar Geyser Direct relies on warm water rising, a phenomenon known as natural convection, to circulate water through the flat plate collector and to the tank.The hot water storage tank is located above the flat plate or in the roof.omestic Solar Geysers. Solar Geyser Direct relies on warm water rising, a phenomenon known as natural convection, to circulate water through the flat plate collector and to the tank.
|
A typical geyser timer installation takes about 20-30 minutes and our installers will test the timer to ensure that you have hot water from your geyser before they leave. With more than 200 successful installations already done and with the Annual Electricity Price increases on their way, there is a solution.aximise your geyser efficiency by adding a geyser blanket. This combination of the geyser timer installation and the geyser blanket has proved itself the most effective way of cutting down the energy use on your geyser.
|
eng_Latn
| 35,439 |
hot steam temperature
|
steam condensing rate is known. In the application section of this Handbook, there are several references to the use of the steam table. Total Heat of Steam (Column 6). The sum of the Heat of the Liquid (Column 4) and Latent Heat (Column 5) in Btu. It is the total heat in steam above 32°F. Specific Volume of Liquid (Column 7). The volume per unit of mass in cubic feet per pound. Specific Volume of Steam (Column 8). The volume per unit of mass in cubic feet per pound.
|
However, if heat is added to the saturated steam (shown. in Image 2), the steamâs temperature risesâand in the case. of this illustration, superheats the temperature of the steam. from 212°F to 232°F. The amount of superheat in a vapor is determined by sub-. tracting the saturation temperature from the actual vapor.
|
eng_Latn
| 35,440 |
what do you look for to see if your water heater needs to be replaced
|
You will know when to replace your water heater when you find it has rust and corrosion, it produces cold or luke-warm water, it is older than 10 years, you are constantly finding leaks, or you are not able to drain water through the valve. Look for these signs when determining when your water heater needs to be replaced: Rust and Corrosion: This is the most important factor to identify as the rust will cause the tank to be weak and eventually burst to cause a flood in your home. One of the most common ways to find rust is to see it in your tap water. You can also find it by the pressure relief and temperature valve or the water inlet and outlet connections. If you have not noticed a leak yet, be sure to inspect all around the ...
|
If water is leaking from hot or cold water lines your water heater should be okay. If the water heater is dry on the top, check the hose bib (place where hose can be hooked up) at the bottom side of water heater. If the hose bib is dry the water heater needs replaced. Before turning water off to a gas water heater.
|
eng_Latn
| 35,441 |
does water heaters drain thru the pressure valve
|
Determine whether or not the valve is actually clogged. Turn off the water heater at the breaker panel. Alternatively, turn the gas valve until the valve sits perpendicular along the gas pipe. Attach a drain hose if the drain valve is not within close proximity to a drain. Open the drain valve and begin to drain the tank. Open the pressure-relief valve on top of the water heater. Alternatively, turn on a hot water faucet. This will eliminate the negative pressure in the tank and allow it to drain. If the drain begins to run clean and clear, the problem is solved. If the water still trickles out, the valve is clogged.
|
Page 17 If a pressure limiting valve is installed on the cold water line to the water heater and the cold water line to a temperature limiting device branches off before this... Page 18 A RheemPlus water heater cannot be installed as part of a circulated hot water flow and return system in a building.
|
eng_Latn
| 35,442 |
can water heater temperature increase electric bill
|
Increasing your water heater temperature by just 10ºF from 130ºF to 140ºF may increase heat loss resulting in a larger electric bill from $30 to $75 dollars annually. Setting the temperature to 140ºF can also increase demand losses resulting in an annual expense of up to $500 dollars.
|
Electric water heater. 1 Make sure that the power is connected. 2 Flush the heater to remove sediment from the tank. 3 Insulate the hot water pipes. Replace the heating element or 1 thermostat. Raise the temperature setting on the thermostat.
|
eng_Latn
| 35,443 |
About how many 8fl oz hot drinks can you get out of the 3lb bag?
|
We love frappes and get about 18 to 20 pitchers of frappes...quick guess would say 50 or so hot...but that is s guess. It goes a long way.
|
The SB800 holds enough power for 3 auto TTL flashes. However final recycling can be 3 seconds once it has used up stored energy after 3 shots. Add the 5th battery with extended compartment or hook up to external power source and fires and recycles faster. Find specifications on Nikon site, or google the specifications of this flash. If you are taking photos at higher iso like 1200 or 1600 iso, it will not use as much flash power.
|
eng_Latn
| 35,444 |
Lack of Efficacy of Fadrozole in Treating Precocious Puberty in Girls with the McCune-Albright Syndrome
|
Management of precocious puberty in girls with McCune – Albright syndrome using letrozole
|
Increase in insulin response after treatment of overt maturity-onset diabetes is independent of the mode of treatment
|
eng_Latn
| 35,445 |
What does it look like when a boy has a boner?
|
Is it normal to get a boner when your nine?
|
Why do boys get on hard everyday?
|
eng_Latn
| 35,446 |
Is it normal to be 13 and have no armpit hair?
|
Im 13 and have pubic hair but not armpit hair when will i get armpit hair?
|
Im 13 and have pubic hair but not armpit hair when will i get armpit hair?
|
eng_Latn
| 35,447 |
What do 13 yr old boys like in 13 yr old girls?
|
Do 13 year old boys like bib boobs?
|
What if you never masturbate and never have a wet dream at age 13?
|
eng_Latn
| 35,448 |
How big is 12 year old boobs?
|
How big should a 14 year old's breasts be?
|
How can a 11 year old get big breast?
|
eng_Latn
| 35,449 |
What part of human body does not grow?
|
What is the only part of the body that does not grow?
|
What is the only part of the body that does not grow?
|
eng_Latn
| 35,450 |
What dose age range mean?
|
Do boy's grow abbs at 13 years of age?
|
I really want to dump this boy but i don't know what to say?
|
eng_Latn
| 35,451 |
Are spots on your penis normal in puberty?
|
Is it normal to have spots on your penis if your going through puberty?
|
What are these tiny spots on your penis?
|
eng_Latn
| 35,452 |
Fat toddlers 'risk early puberty'
|
Girls who are overweight as toddlers risk reaching puberty as early as nine years old, a study suggests.
|
There's more bad news for those pudgy couch potatoes, junk food junkies and TV devotees -- and this time it really hits them where it hurts.
|
eng_Latn
| 35,453 |
At what age do boys' height stop increasing?
|
Until what age does a boy's height increase?
|
When do various bones stop growing?
|
eng_Latn
| 35,454 |
How do I gain weight in three weeks?
|
How do I gain weight in 2-3 weeks?
|
How do I make my arms bigger?
|
eng_Latn
| 35,455 |
What is the best weight gain treatment for gaining weight?
|
What is the best way for underweight to gain weight?
|
How do I increase my weigh?
|
eng_Latn
| 35,456 |
What should I do to gain some weight?
|
How can I gain weight naturally?
|
How do I gain big chest?
|
eng_Latn
| 35,457 |
How do I Gain Breast Fat Without Gaining Weight?
|
How can you gain breast weight?
|
How do I make my arms bigger?
|
eng_Latn
| 35,458 |
What is the ratio between muscle and fat among post-pubertal boys?
|
Another set of significant physical changes during puberty happen in bodily distribution of fat and muscle. This process is different for females and males. Before puberty, there are nearly no sex differences in fat and muscle distribution; during puberty, boys grow muscle much faster than girls, although both sexes experience rapid muscle development. In contrast, though both sexes experience an increase in body fat, the increase is much more significant for girls. Frequently, the increase in fat for girls happens in their years just before puberty. The ratio between muscle and fat among post-pubertal boys is around three to one, while for girls it is about five to four. This may help explain sex differences in athletic performance.
|
Even though proportionality is confined to the proportional seats to prevent a part from being overrepresented, several restrictions apply in the assignation of the seats; namely, that no party can have more than 63% of all seats, both uninominal and plurinominal. In the 2006 elections leftist PRD got the absolute majority in the direct uninominal elections, securing 34 of the 40 FPP seats. As such, the PRD was not assigned any plurinominal seat to comply with the law that prevents over-representation. The overall composition of the Legislative Assembly is:
|
eng_Latn
| 35,459 |
how come guys usually have bigger muscles than girls? and why is it so easy for them to gain muscles?
|
Shortly because male people have more muscular mass and consequentially during the exercise the muscles gain more and quickly
|
Must see a doctor.\n\nTips: \n\nCycle does not start if they do not have enough Fat tissue. Must put on fat just not weight. Female body builder may not menstruate.\n\nMay not have Ovaries, birth defect.\n\nMay have ovaries but does not produce eggs, temporary or permanent condition. Same pills as birth control pills in small dose may help, must be supervised by a doctor.
|
eng_Latn
| 35,460 |
i want to get brests and im a man.how can i get them permanently?any surgery suggest or medicene
|
there are some drugs used in some movies
|
Some women's breasts don't grow until they're much older than the age for "average development"...I was very flat-chested until about 18. Also, weight has something to do with it. If you are very thin, you breasts won't grow b/c you don't have enough body fat, since breasts are fat. As many of us learn as we get older, breasts get larger the more you weigh.
|
eng_Latn
| 35,461 |
is it when she needs a traing bra,,
|
It's from puberty (about 10,11,12 these days-must be the streroids in the meat we eat) through later teens (18,19,20). Then again when she is pregnant. Another time would be during implants.\nAnd usually, it is common for both of them to get bigger at the same time, not just a "chosen" one (as your question suggests)
|
We don't need you to fix our probs just let us vent and get it out. Our brain is wired to talk our probs out, unlike the man's brain, which is wired for prob solving.
|
eng_Latn
| 35,462 |
Know when You Are Going to Start Puberty (Girls)
|
Puberty can be an exciting and confusing time for any girl. It means you’re growing up and can do things you weren’t able to as a child. But it can also be hard to know when you’re starting puberty or what to expect.
|
Ever wanted to be an awesome prankster? This article will make your dream come true!
|
eng_Latn
| 35,463 |
Be Ready for Puberty
|
Are you extremely worried about the upcoming changes associated with puberty? Don't worry. Read on to find out how to survive- and maybe even enjoy this important stage in your life.
|
Ever wanted to be an awesome prankster? This article will make your dream come true!
|
eng_Latn
| 35,464 |
Is it ok to love someone who is around 20 years older than you? Maybe more maybe less...and well I'm only 14. So if it is what should I do? Should I do anything or just keep my feelings to myself?
|
wrong,you have so so much more growing to do.
|
Can I ask why you are worried?\n\nAt 14, your body will store "energy" to grow. This is not to say you should plant on the couch and stuff burgers in your mouth, but do not obsess!\n\nBe active. Dance, aerobics, whatever you enjoy, but don't sweat it. Your body will go through odd spurts to grow. Please don't worry too much about it, but just try to remain healthy.\n\nAFTER your body has reached it growth peak, you need to burn more calories that you intake, to lose weight. If you are truly concerned, see your doctor for advice.\n\nI say this as someone that had to overcome an eating disorder.
|
eng_Latn
| 35,465 |
does traning in gym hurts the growing bones for teenagers?
|
There are no studies to indicate that your growth will be affected by going to the gym. In fact, doctors would encourage you to be active and healthy.\nTraining will not make you any shorter.
|
You get MAJOR cardio! Trot, canter, gallop a horse for a while and you will see. Also, if you ride english, posting correctly strengthens abs. Legs, arms, back, torso ... all are "worked out".\n\nTry the following website for a calorie calculator:\nhttp://www.weightlossresource.com/tools/exercise/calculator1_2.cfm
|
eng_Latn
| 35,466 |
How a can I possibly gain weight?
|
1. chew more when you eat.\n2. be happy, don't pressure yourself too much.\n3. be pregnent if you are girl :P *jk*\n4. eat healthy
|
dont listen to my crack head sister ALLIEY, stay up as late as you can, gorge on key lime and any other pie, fall asleep with whipped cream coating your teeth, then, regret it all in the morning. yeahh. thats what I'd do.
|
eng_Latn
| 35,467 |
At what age does a males body stop growing or forming into its potential shape?
|
most boys arent done growing untill around twenty or twenty one, this includes pubic hair, genitles , and muscles........however, most of this is genetically decided.
|
By da end of 2007.This question has already been posted u can c da responses on http://answers.yahoo.com/question/index;_ylt=AjEbr3d4BnUhI4hX85xTC1Xsy6IX?qid=1006051104778
|
eng_Latn
| 35,468 |
my 8 year old is skinny how do i get him to gain weight?
|
What a coincidence. I was just looking at pictures of my son from age 14, 15,16, 17, 18, and now at 19. He is SOOOOO skinny. I guess I never really noticed. I knew he was thin, I mean he's now 6'4" and weighs 151 pounds. He has not been chubby since he was 3 months old and solely survived on breast milk.\n\nYet he is very healthy, athletic, intelligent and eats like a horse. His sister, who is 16, 5'9", weighs 155 (tell me THAT's not an issue) tells me she knows a lot of skinny guys her age. The doctor tells me he is and always has been healthy, if low weight percentile, and I shouldn't worry.\n\nStill. I worry. Why are we never satisfied? Do you really think you need to worry? B/c if so, get a good diet from your pediatrician, and add pediasure supplements to it. That'll help, at least in the short run. \n\nGood luck.
|
Do you have his social security number?? if you do call a child support office in mass. i live in mass and thats the only thing i can think of is call child support IF you have his social security number, if not then im sorry. Good luck
|
eng_Latn
| 35,469 |
Okay so i'm 14 and all of my friends are really skinny and most of them have boyfriends, i've had boyfriends before but not as many as most of my friends and i think it's because i'm not really skinny, what do you think, do you prefer really skinny girls or average girls?
|
This is tuff. Believe it or not, guys like different things in girls. Some guys like girls that are like sticks, some like girls with some meat on there bones. Some guys like small boobs, some guys like big boobs. The most important thing for you to ALWAYS remember it you need to like yourself. If you don't like yourself it is hard for others to like you. Any guy, and I do mean any, should like you for you. Not because you have big boobs and are a stick. They are not really worthy of you if they don't accept you for whom you are. As far as that goes, you need to accept you for whom you are. Don't worry, you are young. In time you will find the right guy. Don't place a large enfasist on trying to be with a guy now. Hard to accept but you should worry about doing well in school. This way when you are older, you will be smarter and make allot of money and then the guys will flock around because you are not poor. Good luck.
|
The amount of fat you have is totally dependent on what you eat, how much you eat, and how much exercise you get. There really is now such thing as "baby fat". That's just something people have made up to to give false reassurance to their children, "Oh, that's just baby fat and you'll grow out of it.".\n\nI don't know how old you are, but you are never too young to eat a healthy diet with the amount of calories that will keep you from having to much fat on you. You are not too young to take a brisk walk every day and play in appropriate sports for for your age and health level.\n\nGod bless you and I wish you success in every area of your life.
|
eng_Latn
| 35,470 |
I'm sorry but I want to gain weight and nothing I do is working. Where can I go.
|
No, I ask my doctor that when I was young .I didn't start gaining until I was 30.
|
Try sparkpeople.com -- it's free and easy. You can follow their menus or choose your own foods. You have to really track what you eat though, and be honest about it.
|
eng_Latn
| 35,471 |
I'm only thirteen but i think im pretty much done growing. im only 4"9... how can i get taller?
|
I wouldn't consider it a problem. A lot of guys, including myself, find short girls attractive. Enjoy the attention!
|
there are a lot of ways to increase metabolism.\n\n1. exercise. exercise increases metabolism because like any activity that requires you to move and exert effort, you are expending energy and thus burning calories.\n\n2. muscle gain. exercising with weights will lead to muscle gain which will in turn lead to a higher metabolism. Your metabolism will increase if you gain muscle because those muscles will require extra energy to stay alive and thus the increase in metabolism.\n\n3. eating eating small meals more frequently as opposed to the big 3 (breakfast, lunch, dinner) also increases metabolism. try to eat a small meal every 3 hours. The reason for this is that your body burns more calories since it is constantly digesting something in your stomach and will raise your metabolism.
|
eng_Latn
| 35,472 |
what secret changes occur in boys during puberty which girls dont know about?
|
The penis enlarges in size,it also starts getting an erction and discharges after puberty,voice gets coarse,pubic and axillary hair growth,growth of beard as well as hair on most of parts of body,start seeing girls as girls( i hope u undrstand wat i m sayin) as well as there are tremendous other physical and mental changes!
|
a puppy will grow to be a dog, a man already is
|
eng_Latn
| 35,473 |
well im kind of chuby and i think that boys hate me because of it but there are a lot of popular boys who do?
|
I love you my chuby. Your swety heart is enogh.
|
Everyone has a different build. It really isn't measured by the school grade you are in. The body weight depends on many factors. Such as if you have small, medium or large bones, how tall you are, how muscular you are. I personally try not to even use the scale. If you are feeling a little too thin or too thick, there are many solutions. Ask your school PE teacher to recommend some good weight management books. And start there. But don't try to put a weight limit on yourself just by the grade you are in. Remember every one is different! Be proud of who you are! :)
|
eng_Latn
| 35,474 |
Random forests
|
Boosting in the Limit: Maximizing the Margin of Learned Ensembles
|
Leptin accelerates the onset of puberty in normal female mice.
|
eng_Latn
| 35,475 |
What should I eat to gain weight?
|
How do I gain some healthy weight?
|
Why am I not gaining weight?
|
eng_Latn
| 35,476 |
How can I gain weight on my body?
|
What should I eat to gain weight?
|
What caused your weight gain?
|
eng_Latn
| 35,477 |
How could I gain weight?
|
What should I do to gain some weight?
|
What causes unexplained weight gain?
|
eng_Latn
| 35,478 |
How to gain weight ?
|
How should I gain muscle mass?
|
Why does it take so long to gain muscle mass?
|
eng_Latn
| 35,479 |
What should I do to gain some weight?
|
How can gain my weight?
|
What causes weight gain?
|
eng_Latn
| 35,480 |
How can I gain weight?
|
How do I gain weight?
|
I am a skinny guy. How can I gain weight? I eat a lot but I could not gain weight. Should I go to gym?
|
eng_Latn
| 35,481 |
What should be done to gain weight in few days?
|
What is the way to gain weight in short days?
|
Can you gain one pound in a day?
|
eng_Latn
| 35,482 |
How to gain weight ?
|
How do I gain weight?
|
Why am I not gaining weight?
|
eng_Latn
| 35,483 |
How should I gain muscle mass?
|
How do I gain weight?
|
Why am I not gaining weight?
|
eng_Latn
| 35,484 |
How do I gain weight in a healthy way?
|
How can I gain weight but also eat healthy?
|
I'm a 14 year old boy who is around 5.8 and I weigh about 106 pounds. I go to the gym and do weight training 3-5 times a week and eat lots of food. Am I under weight? If so, how do I gain weight?
|
eng_Latn
| 35,485 |
How can I gain weight naturally?
|
What is the best weight gain treatment for gaining weight?
|
Why am I gaining weight?
|
eng_Latn
| 35,486 |
How should I gain muscle mass?
|
How can gain my weight?
|
What caused your weight gain?
|
eng_Latn
| 35,487 |
When do bones stop growing?
|
When do various bones stop growing?
|
At what age does breasts stop grow?
|
eng_Latn
| 35,488 |
How do I gain healthy weight without eating junk?
|
What are some of the best ways to gain weight in a healthy way?
|
How can a teen gain weight?
|
eng_Latn
| 35,489 |
How can I gain weight on my body?
|
What should I do to gain some weight?
|
How have you (successfully/or not) gained weight?
|
eng_Latn
| 35,490 |
How can I gain weight in one month?
|
How do I gain weight within a month?
|
I'm 19, weighing 132 lbs, 5x a week workout. Is it okay for me to take mass gainer? (skinny fat)
|
eng_Latn
| 35,491 |
What should I eat to gain weight?
|
How can gain my weight?
|
How much should I eat to gain muscle?
|
eng_Latn
| 35,492 |
How can gain my weight?
|
How can I gain weight?
|
How can I gain muscles?
|
eng_Latn
| 35,493 |
How do I improve diet to gain weight? What are other options to gain weight?
|
What is the proper diet to gain weight?
|
I'm a 14 year old boy who is around 5.8 and I weigh about 106 pounds. I go to the gym and do weight training 3-5 times a week and eat lots of food. Am I under weight? If so, how do I gain weight?
|
eng_Latn
| 35,494 |
At what age do your breasts stop growing?
|
At what age does breasts stop grow?
|
How can the size of breasts be reduced?
|
eng_Latn
| 35,495 |
How can I gain weight within month?
|
How do I gain weight within a month?
|
Why do I gain weight working out?
|
eng_Latn
| 35,496 |
What should we do for gaining weight?
|
What shall I do to gain weight?
|
Does sex cause weight gain?
|
eng_Latn
| 35,497 |
pre puberty age
|
In girls, puberty usually starts around 11 years of age, but it may start as early as 6 or 7 years of age. In boys, puberty begins around 12 years as age, but may start as early as 9 years of age.
|
In girls, puberty may start as early as 8 years of age, but it usually starts around 11 years of age. In boys, it begins around 12 years as age, but may start as early as 9 years of age. This is a process that goes on for several years.
|
slk_Latn
| 35,498 |
average weight gain for toddlers
|
Birth. The average newborn is 19.5 inches long and weighs 7.25 pounds. Boys have a head circumference of about 13.5 inches and girls measure in at 13.3 inches, according to the National Center for Health Statistics.1 Baby Growth Charts: Calculate Height and Weight.2 Charting Baby's Development.irth. The average newborn is 19.5 inches long and weighs 7.25 pounds. Boys have a head circumference of about 13.5 inches and girls measure in at 13.3 inches, according to the National Center for Health Statistics.
|
According to Robert Malina, an expert on childhood growth, adolescents gain weight and height in a predictable pattern, with height growth occurring first, followed by weight gain, or what I like to call âfilling out.â. The average peak height gain in girls occurs between 11 and 13, and in boys between 13 and 15 years of age. The lean tissue (muscles and bones) weight gain during this time is about 15 pounds for girls and twice that for boys (~30 pounds). Girls gain more fat (~6 pounds) on average than boys (~3 pounds) at this time as well. Given these norms for adolescent growth (and the signs that go along with it), you can begin to see that an important transformation happens in teens, and much of it is to be expected.
|
eng_Latn
| 35,499 |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.